Vehicle speed control
The automatic speed control switch may stick in the "resume" position restricting return movement. This will not allow the normal brake pedal operation to deactivate the system.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Dodge Mirada (alle generationen) erhalten
The automatic speed control switch may stick in the "resume" position restricting return movement. This will not allow the normal brake pedal operation to deactivate the system.
Engine may lose power or stall due to carburetor flooding. This is caused by a poor electrical ground on the carburetor fuel bowl vent solenoid. Vehicles may also have driveability problems while the engine is warming up in cold weather. These problems include engine missing, sags, and hesitation. This is caused by a sticking carburetor oxygen feedback solenoid.
Vehicles may not conform to federal motor vehicle safety standard no. 108, "lamps, reflective devices and associated equipment". On certain vehicles, the front park and turn signal lamps may contain incorrect lamp bulb socket assemblies. Engineering testing determined that these lamps do not produce a sufficient amount of light.
1980 dodge mirada and chrysler cordoba vehicles equipped with 318 cubic inch 2 barrel carburetor engines. Marginally excessive friction in the carburetor throttle linkage system, caused by assembly variations, may result in the total friction level exceeding the force capability of the throttle return springs. This condition may result in the throttle not properly returning to a closed position when the accelerator pedal is released.
Increased friction experienced in operation or servicing of the system may result in a total friction level exceeding the force capability of the throttle return springs. This may prevent the throttle from returning properly to a closed position when the accelerator pedal is released.
The defect involves the potential for exhaust gas (containing carbon monoxide) entry into the passenger compartment which can occur as a result of improperly retained plastic sealing plugs in the rear quarter panel/trunk area of the vehicle. Carbon monoxide is a toxic gas which in sufficient quantity and exposure time is potentially lethal.
The plastic sealing plugs in the rear fender extension panels may not be adequately retained in the panel access holehe universal the plastic sealing plugs in the rear fender extension panels may not be adequately retained in the panel access hole. This condition may allow exhaust gas to enter into the passenger compartment.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).