Bei bestimmten Fahrzeugen könnte eine übermäßige Vergrößerung einer Führungsbohrung im hinteren Bremsankerblech dazu führen, dass sich der Radbremszylinder drehen kann. Dies kann möglicherweise zum Verlust von Bremsflüssigkeit an den Hinterradbremsen und zum Ausfall der hinteren Bremswirkung führen. Dadurch würden sich die Bremswege verlängern, und es könnte zu einem Unfall kommen. Hinweis: nur Fahrzeuge in Ontario und Quebec.
Transport Canada28. Mai 19861986056Modelljahre 1980–1984Automatisch übersetzt · Original: EnglischDetails ansehen →
The axle retaining "c" clip in the differential may dislodge and allow the axle, wheel and brake drum to separate from the vehicle when subjected to side forces. Axle separation could result in loss of vehicle control and possible crash.
Transport Canada11. Jan. 19851985010Modelljahre 1980Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The rear brake system brake pipe from the master cylinder to the proportioner valve on these vehicles may be contacting the air cleaner resonator bracket. Over an extended period of operation, the brake pipe could wear through sufficiently to cause a loss of brake fluid and a partial loss of braking action. If a vehicle happens to be in motion at a time when minimum stopping distance is required, this condition could result in a vehicle crash without prior warning. Models equipped with 5.7 l. V-8 diesel engines.
Transport Canada7. Okt. 19831983083Modelljahre 1983Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
"tx" heavy duty wheels may have been manufactured with laminated steel. The wheel disc may fracture and the wheel and tire could partially or completely separate from the vehicle.
NHTSA · USA23. März 198181V036000Modelljahre 1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Eine kleine Nylonbuchse im Servo-Bail des Tempomats kann aus der Position rutschen, was zu intermittierenden und unerwarteten Drehzahlsteigerungen oder Dieseln (Motorlauf mit ausgeschalteter Zündung) führt.
Bei bestimmten Fahrzeugen könnte eine übermäßige Vergrößerung einer Führungsbohrung im hinteren Ankerblech dazu führen, dass sich der Radbremszylinder verdrehen kann, was möglicherweise zum Verlust der hinteren Bremswirkung führt.
Rear axle assembly may have axles that were improperly manufactured. This condition may result in separation of the axle shaft and wheel assembly from the vehicle.
The master cylinder rear brake pipe, which carries brake fluid to the rear brakes, may develop a leak due to extended chafing on the air cleaner resonator bracket.
On vehicles equipped with heavy duty wheels, the wheel discs may crack and could result in separation of the tire and part of the wheel from the vehicle. This could cause loss of vehicle control.
Transport Canada26. März 19811981038Modelljahre 1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The bolts that attach the lower rear control arm to the frame may fracture. The rear control arm supports and positions the rear axle. Fracture of the bolts would allow the control arm to drop free.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).