The DC-DC converter may be faulty, which can cause the current from the 12V battery to continue to flow, generating heat and increasing the risk of a vehicle fire.
The plug-in hybrid system of the subject vehicles includes a DC-DC converter that reduces the voltage of the electricity from the Hybrid Vehicle (HV) battery in order to charge the vehicle�s 12V battery. Contained within the DC-DC converter is a current rectifying module that is installed on the circuit board. Some of these modules may have been damaged during production by the supplier and could fail so creating a short circuit. This allows current from the 12V battery to continue to flow through the module and the module will generate heat. Under certain conditions if excessive heat is generated components within and outside the DC-DC converter could sustain thermal damage increasing the risk of a vehicle fire.
DVSA · Vereinigtes Königreich21. Aug. 2023R/2023/209Modelljahre 2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
DC-DC 컨버터(전압 변환장치)의 내부 회로 설계 오류로 내부 부품이 손상되고 이로 인해 단락이 발생할 수 있으며, 이런 경우 경고등이 점등되고 12V 배터리에서 전류가 계속 흐르게 되어 과도한 열이 발생되므로 최악의 경우에는 화재에 이를 우려가 있음이 확인됨에 따른 리콜
MOLIT · Südkorea10. Aug. 20234862Modelljahre 2021Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Problem: Dieser Rückruf betrifft bestimmte Blockheizsätze, die bei bestimmten Fahrzeugen installiert oder als Zubehör bei Toyota- oder Lexus-Händlern verkauft werden. Bei bestimmten Fahrzeugen hat das Motorblockheizkabel möglicherweise nicht ausreichend Hitzeschutz und kann durch hohe Temperaturen beschädigt werden. Wenn dies passiert, könnte das Kabel während des Einsteckens kurzschließen und dazu führen, dass die Kabel überhitzt oder schmelzen. Hinweis: Dieser Rückruf betrifft nur die folgenden Teilenummern des Blockheizer/-kabels: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Sicherheitsrisiko: Überhitzung oder Schmelzen der Motorblockheizungsleitungen können ein Brandrisiko darstellen. Korrekturmaßnahmen: Toyota empfiehlt, die Motorblockheizung sofort nicht mehr zu verwenden. Toyota wird die Besitzer per Post benachrichtigen und Sie anweisen, Ihr Fahrzeug zu einem Händler zu bringen, um den Motorblockheizer zu deaktivieren. Für einige Fahrzeuge sind die Korrekturmaßnahmen für diesen Rückruf noch in Entwicklung. Bei anderen kann kein neuer Motorblockheizer installiert werden, und der Besitzer erhält eine Rückerstattung des Kaufpreises für den Motorblockheizer.
On certain vehicles, the electrical power cords of some dealer installed block heaters may have been improperly manufactured, causing the wires to contact each other, resulting in a short circuit. A short circuit could lead to a fire which would increase the risk of injury and/or damage to property. Correction: For vehicles where the subject block heater was approved for installation, the dealer will replace the block heater assembly with a new one of an improved design. For vehicles where the subject block heater was not approved for installation, dealers will remove the block heater assembly. In the interim, until the remedy can be performed, dealers will cut the plug end from the block heater cord to disable the block heater's operation.
Transport Canada20. Juli 20172017363Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Aufgrund eines Softwareproblems kann die Einparkhilfe, die mit dem Surround View Monitor (PVM) zusammenarbeitet und das Rückfahrkamerabild anzeigt, während des Rückwärtsfahrens kurzzeitig einfrieren, wenn der Rückwärtsmodus kurz nach dem Start des Fahrzeugs ausgewählt wird. Außerdem kann es sein, dass die Rückfahrkamera beim nächsten Start des Fahrzeugs nicht erscheint, wenn das Fahrzeug innerhalb kurzer Zeit ein- und wieder ausgeschaltet wird. Dies kann das Risiko eines Unfalls mit einer Person oder einem anderen Fahrzeug während eines Support-Events erhöhen.
Safety Gate · EU · RappelConso · Frankreich10. Aug. 2026sr/03911/25Modelljahre 2021Automatisch übersetzt · Original: FranzösischDetails ansehen →
La programmation du logiciel de la caméra de reconnaissance avancée peut entraîner une défaillance de la mémoire lorsque l'allumage est éteint, ce qui peut empêcher le système de précollision de s'activer lors du prochain démarrage, de déclencher des voyants d'avertissement, de sonner des carillons et d'afficher des alertes sur le tableau de bord. ignorer ces avertissements peut augmenter le risque d'accidents et de blessures.
Safety Gate · EU · RappelConso · Frankreich26. Juni 2026a12/01918/24Modelljahre 2021Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Bei bestimmten Fahrzeugen mit einem Parking Assist ECU, einer Komponente des Panoramic View Monitor (PVM)-Systems, das das Rückansichtsbild anzeigt, kann die Software dazu führen, dass das Rückbild einfriert oder nicht angezeigt wird
Due to the programming of the forward recognition camera software there is a possibility that the memory inside the forward recognition camera could fail during processing when the ignition is turned OFF. If this occurs the PCS will not activate on the next ignition start causing warning lights to illuminate audible chimes to sound and messages to display on the instrument panel.
DVSA · Vereinigtes Königreich5. Aug. 2024R/2024/250Modelljahre 2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
The programming of the forward recognition camera software can lead to memory failure when the ignition is turned OFF. This can prevent the pre-collision system from activating upon the next ignition start, triggering warning lights, sounding chimes, and displaying alerts on the dashboard. Ignoring these warning can increase the risk of accidents and injuries.
Safety Gate · EU16. Juli 2024A12/01918/24Modelljahre 2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On affected vehicles there is a possibility that the DCM may not complete the shutdown process within a specific period of time when the ignition is turned off causing the DCM to not restart at the next ignition cycle and making the e-Call function unavailable. As a result the vehicles do not comply with relevant regulations.
전방 인식 카메라의 소프트웨어 오류로 인해 전방 인식 카메라가 정상 작동되지 않을 수 있으며, 이런 경우 차량 시동 시 운전보조기능 관련 경고등이 표시되고, 경고음이 울리며 운전보조기능이 제대로 작동되지 않을 수 있는 가능성에 따른 리콜
<*대상차량별 생산일자> NX350h: 2021.04.22~2023.03.04 NX450h+: 2021.04.22~2023.03.01 CROWN Dual Boost HEV: 2023.03.02~2023.09.26 CROWN HEV: 2023.03.02~2023.10.02
MOLIT · Südkorea25. Juli 20245293Modelljahre 2021Im Original (Koreanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).