Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda MX-6

1987–1997 · 2 generationen · 8 dokumentierte Mängel · 2 Märkte
Generationen
Modelljahr
MX-6 II · 1991–1997
MX-6 I · 1987–1997MX-6 II · 1991–1997
RückrufKritischMotorUK

Es kann ein Feuer auftreten

Verkohltes Fett kann sich zwischen den Kontaktpunkten im Zündschalter ansammeln, was die Isolierungsleistung im Inneren des Schalters verringert. In diesem Zustand kann der Schalter Wärme erzeugen, was Rauch und im schlimmsten Fall zu einem Brand führt.

DVSA · Vereinigtes Königreich30. Sept. 2016R/2016/210Modelljahre 1989–1998Automatisch übersetzt · Original: EnglischDetails ansehen →
MX-6 II · 1991–1997
MX-6 II · 1991–1997
RückrufKritischElektrikNA

Elektrisches System: Zündung: Schalter

Mazda North American Operations (Mazda) ruft bestimmte Modelljahre 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6 und 1993-1998 626 Fahrzeuge zurück. In den betroffenen Fahrzeugen kann das auf die Kontaktpunkte im Zündschalter aufgetragene Fett leitfähig werden und überhitzen.

NHTSA · USA19. Okt. 201515V674000Modelljahre 1993–1997Automatisch übersetzt · Original: EnglischDetails ansehen →
MX-6 I · 1987–1997
RückrufKritischElektrikJP

Sonstiges (Elektrische Anlage)

Im Zündschalter kann es vorkommen, dass den Kontakten im Schalter eine übermäßige Menge Fett aufgetragen wurde. Durch die Hitze des Lichtbogens, der beim Betätigen des Schalters entsteht, verkohlt das Fett und lagert sich zwischen dem beweglichen und dem festen Kontakt ab, wodurch die Isolationsfähigkeit im Inneren des Schalters abnimmt. Wird der Schalter in diesem Zustand weiter benutzt, kann es zu einer Durchschaltung zwischen den Kontakten kommen. Der Schalter kann sich dann erhitzen und Rauch entwickeln; im schlimmsten Fall besteht die Gefahr eines Brandes.

jp16. Okt. 20151136430Modelljahre 1989–1998Automatisch übersetzt · Original: JapanischDetails ansehen →
MX-6 I · 1987–1997
RückrufKritischMotorJP

燃料タンク

燃料タンクの上部に取り付けられている樹脂製のロールオーバーバルブ取付用部品に成 形不良のものがあり、このままの状態で使用を続けると、当該部品と燃料タンクの間に隙 間が発生し、燃料が漏れるおそれがある。

jp18. Juli 19961104620Modelljahre 1994–1995Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997MX-6 II · 1991–1997
RückrufKritischInnenraumNA

Sitze und Sicherungen

DIE (Takata) ABS-PLASTIK-GURTLÖSER VORNE BEI DIESEN FAHRZEUGEN KÖNNEN BRECHEN, SODASS PLASTIKTEILE IN DIE SCHNALLE FALLEN. FALLS DIES EINTRITT, KANN ES ZU EINEM ZUSTAND OHNE VERSCHLUSS, FALSCHER VERRIEGELUNG ODER NICHT ZUM LÖSEN KOMMEN, WAS BEI EINEM UNFALL ODER EINEM PLÖTZLICHEN ANHALTEN DAS RISIKO EINER PERSONENVERLETZUNG DARSTELLT. KORREKTUR: DIE VORDEREN GURTSCHNALLEN WERDEN BEI BEDARF REPARIERT ODER ERSETZT.

Transport Canada24. Mai 19951995085Modelljahre 1988–1991Automatisch übersetzt · Original: EnglischDetails ansehen →
MX-6 II · 1991–1997
RückrufKritischFahrwerkNA

Suspension:Front:Control arm

The lower arm ball joints on both sides of the front suspension may not have been torqued to specification.

NHTSA · USA2. Apr. 199292V045000Modelljahre 1993Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
RückrufKritischKarosserieNA

Structure

The fuel tank straps may not be properly tightened and may rub against the fuel tank. This could cause the tank's protective coating to wear through resulting in surface damage and eventual tank perforation and fuel leakage. Correction: Rubber insulator will be placed between the tank straps and the tank and the tank straps will be properly tightened. Also, a new protective coating will be applied where required. V.I.N. Range: Jm1gd3120j1500014 to jm1gd2210j1537936

Transport Canada8. Dez. 19871987133Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
RückrufKritischMotorNA

Fuel system, gasoline:Storage:Tank assembly

Fuel tank fixing band retention is not sufficient, allowing the band to rub against the fuel tank by vehicle vibrations.

NHTSA · USA7. Dez. 198787V186000Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelElektrikNA

Exterior lighting:Headlights:Switch

Vehicle description: Passenger vehicles. The headlight wire that runs through the turn signal lever can fail at the point where it is soldered to the headlight switch.

NHTSA · USA17. Dez. 199999V358000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelMotorNA

Emissions

Certain vehicles do not comply with the requirements of CMVSS. 1103 - Exhaust Emissions. The average CO of the subject vehicles may exceed the standard due to insufficient robustness of emission control logic, and calibration of emission parts with extended usage. Correction: Dealers will install an engine intake kit, which will allow additional air to enter the engine, improving combustion efficiency and lowering the levels of carbon monoxide.

Transport Canada30. Nov. 19991999220Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelMotorNA

Fuel System

Certain vehicles do not comply with the requirements of CMVSS 1105 - Evaporative Emissions. Fuel vapour may leak from between the fuel cap and the fuel filler pipe. The gap could be generated by improper dimensions between the top ends of the inner and outer pipe of the fuel filler pipe. In some cases, raw fuel would be released into the atmosphere. Correction: Dealers will install a modified fuel cap o-ring.

Transport Canada14. Apr. 19991999057Modelljahre 1995–1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelInnenraumNA

Seats And Restraints

On certain vehicles, minor undercarriage impacts can result in unnecessary air bag deployment. This could result in personal injury and/or loss of vehicle control. Correction: Dealers will reprogram the sas unit to reduce the possibility of unnecessary deployments in low speed undercarriage impacts.

Transport Canada21. Okt. 19981998203Modelljahre 1995–1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelInnenraumNA

Air bags:Frontal:Sensor/control module-inactive

Vehicle description: Passenger vehicles equipped with the sas sensor unit. These vehicles can experience air bag deployments in minor undercarriage impacts.

NHTSA · USA8. Okt. 199898V249000Modelljahre 1995–1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelMotorNA

Engine

On certain vehicles, an external spring in the timing belt auto tensioner may break. The broken spring may get caught in the timing belt, resulting in possible engine stalling. Correction: Vehicles will be inspected and affected tensioners will be replaced.

Transport Canada11. Sept. 19981998178Modelljahre 1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 II · 1991–1997
RückrufMittelMotorNA

Engine and engine cooling:Engine

Vehicle description: Passenger vehicles. An external spring in the timing belt tensioner can break and get caught in the timing belt.

NHTSA · USA8. Sept. 199898V206001Modelljahre 1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
RückrufMittelInnenraumNA

Seat belts:Front:Buckle assembly

The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.

NHTSA · USA24. Mai 199595V103005Modelljahre 1988–1989Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
RückrufMittelKarosserieNA

Vehicle speed control:Accelerator pedal

At ambient temperatures below 0 degree f, frost may accumulate within the throttle body under extended constant speed operation.

NHTSA · USA22. Feb. 198888V022000Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
RückrufMittelMotorNA

Engine

At ambient temperatures below -18 degrees celsius, frost may accumulate within the throttle body under conditions of extended constant speed operation. This could result in a heavy accelerator pedal and cause uneven throttle valve return. Correction: The single stage engine coolant thermostat will be replaced with a dual stage thermostat equipped with a subvalve to increase the temperature within the throttle body. V.I.N. Range: Jm1gd3120j1500014 to jm1gd2226j1573252.

Transport Canada18. Feb. 19881988021Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
MX-6 I · 1987–1997
RückrufMittelBremsenNA

Brakes

Transportation by rail could cause the rear brake shoe web to come off the wheel cylinder piston groove. This condition will cause damage to the wheel cylinder dust boot and may cause dust and water intrusion into the wheel cylinder resulting in piston corrosion. This would inhibit rear brake effectiveness. Correction: Vehicles will be inspected and wheel cylinder dust boot will be replaced where required. All involved vehicles will have lubricant applied to the wheel cylinder piston groove. V.I.N. Range: Jm1gd3120j1500014 to jm1gd2218j1541323

Transport Canada16. Dez. 19871987138Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-6 I · 1987–1997
RückrufMittelSonstigesNA

Vehicle speed control:Linkages

Floor mat could interfere with release of accelerator pedal due to improper shape of mat.

NHTSA · USA17. Sept. 198787V149000Modelljahre 1988Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).