On certain vehicles, the bracket that is the anchor point for the left rear fuel tank mounting strap may have been improperly formed during the manufacturing process. This may have caused the metal to spilt in the area where the bolt holds the fuel strap to the underside of the vehicle. In the event the tank is full of fuel and the vehicle is involved in a serious collision the bracket could break and the tank could drop down. This situation could result in a fuel leak and the possibility of a fire. Correction: Dealers will inspect and if necessary install a reinforcement cap to the fuel tank bracket.
Transport Canada10. Okt. 20082008374Modelljahre 2006–2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mitsubishi is recalling 45,988 my 2005-2007 endeavor, galant, eclipse coupe, and my 2007 eclipse spyder vehicles. The bracket that is the attachment point for the left rear fuel tank mounting strap may have been improperly formed during a metal stamping process. The process may have caused the metal to have a split in the area where the bolt that holds one of the two fuel tank straps to the underside of the vehicle is located. In the event the fuel tank is full and the vehicle is subject to a severe collision, the bracket may break and allow the fuel tank to drop down, possibly causing a fuel leak.
On certain vehicles, the fuel return line hose fitting on the electric fuel pump may be restricted, causing excessive fuel pressure to build up in the fuel injection system. Excessive fuel pressure may result in the fuel return hose becoming dislodged, resulting in fuel leakage. Fuel leakage in the presence of an ignition source could result in a fire. Correction: Dealer will inspect the fuel pump pressure. Those vehicles exhibiting higher than normal fuel pump pressure will receive fuel pump modifications.
Transport Canada10. Nov. 20032003277Modelljahre 2004Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain passenger vehicles, the fuel return line hose fitting on the electric fuel pump may be restricted, causing excessive fuel pressure to build up in the fuel injection system. Excessive fuel pressure may result in a leak in the fuel return hose.
Vehicle description: Passenger vehicles. A bulge in the fuel tank caused by the manufacturing process resulted in thinning of the material during a welding operation, increasing the risk of fuel leakage.
NHTSA · USA8. März 200101V069000Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Passenger vehicles. The outer layer only of this 3-layer fuel return hose does not contain the desired ozone protection due to a processing error.
Vehicle description: Passenger vehicles. The harness for the crankshaft position sensor could come in contact with a new protective shield causing a grounded circuit.
Vehicle description: Passenger vehicles. The harness for the crankshaft position sensor could come in contact with a new protective shield causing a grounded circuit.
Vehicle description: Passenger vehicles. The dash panel pad can shift interferring with the throttle cable control.
NHTSA · USA3. März 199898V045001Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).