Motor vehicles - bodywork (occupant protective equipment)
The driver's airbag gas generator may malfunction if it has been exposed to high absolute humidity and high temperature fluctuations over the years
🔔 Create a free account to get email alerts about BMW M5 (E39)
The driver's airbag gas generator may malfunction if it has been exposed to high absolute humidity and high temperature fluctuations over the years
The battery positive (B+) transfer point in the boot may corrode. This can result in increased contact resistance, potentially leading to malfunction of the power supply and increased risk of fire.
Due to ageing effects in the driver's airbag gas generator, excessive pressure may occur when activated.
The replacement parts for driver-side airbag inflators (gas generator units) include some in which moisture protection of the gas generant is inadequate. Therefore, if such an inflator is installed during vehicle repair and continues to be used as is, the gas generant may deteriorate under high humidity and repeated large temperature changes, and the inflator housing may rupture when the airbag deploys.
Due to a defect in the driver's airbag gas generator, it can go off uncontrollably in the event of a collision. Metal parts can be released and shot towards the occupants.
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Due to a defect in the gas generator of the driver's airbag, it may deploy uncontrollably in the event of a collision. Metal parts may be released and shot toward the occupants.
The driver-side airbag inflator (gas generator) may crack its housing when the airbag deploys, causing components to scatter and possibly injure the occupant.
BMW of North America, LLC (BMW) is recalling certain model year 2002-2005 325i, 325xi, 330i, and 330xi Sedans, and 325xi and 325i Sportswagons, 2002-2006 330Ci, 325Ci, and M3 Convertibles and 325i, 330i, and M3 Coupes, 2002-2003 M5, 540i, 525i Sedan, and 530i Sedans, and 540i and 525i Sportswagons, and 2003 X5 3.0i and 4.4i Sports Activity Vehicles. Please note that the 5-series and X5 vehicles are only included if they are equipped with the optional sports steering wheel. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
Under the floor panel of the luggage compartment, in the insulating holder for the battery positive cable, a plastic lock was not inserted properly. As a result, due to vibration and other factors, the holder may loosen from the vehicle body. In that case, poor contact or insulation failure may prevent sufficient power from being supplied to the electrical systems, so the engine may stall and be unable to restart. In addition, arcing between contact points may cause the battery positive cable to heat up, which can scorch the luggage compartment floor panel and, in the worst case, lead to a vehicle fire.
Recall due to the possibility that, when a vehicle is exposed to hot and humid regions for a long period, the compressed gas propellant inside the airbag inflator may deform, and in extremely rare cases the airbag may deploy abnormally in a crash, potentially causing injury to the driver or front passenger. <*Production dates by target vehicle> 520d: 2000.09.26~2003.07.14 520i: 2000.09.04~2003.05.02 520iA: 2000.09.08~2001.07.23 525d: 2000.11.14~2003.09.01 525i: 2000.09.12~2003.06.13 530d: 2001.03.27~2002.09.25 530i: 2000.09.04~2003.05.21 540i: 2000.09.18~2002.10.01 M5: 2000.11.09~2001.03.08 X5 3.0: 2001.03.13~2003.09.29 X5 3.0d: 2003.02.28 X5 3.0i: 2000.05.24~2003.09.25 X5 4.4: 2000.04.25~2003.08.07 X5 4.4i: 2000.06.21~2003.09.26
Driver airbag inflator recall: when a defective inflator was replaced during repair, prolonged exposure of the vehicle to hot and humid regions may, in extremely rare cases, cause deformation of the compressed gas propellant inside the inflator, which could prevent the inflator from operating normally in a collision. [Production dates by target vehicle] 318i: 2000-06-16~2001-12-21 320i: 2000-06-09~2001-12-17 325Ci Convertible: 2000-11-22~2001-12-22 325Ci Coupe: 2000-09-29~2001-04-20 325i: 2000-08-31~2001-12-20 330Ci Coupe: 2000-09-29~2001-10-09 330i: 2000-06-08~2001-12-15 530i: 2000-11-03~2002-02-22 540i: 2000-09-18~2002-02-21 M3 Coupe: 2001-03-05~2001-12-12 M5: 2000-09-19~2001-03-08 X5 3.0i: 2002-10-15~2003-01-30 X5 4.4i: 2001-04-23~2002-12-20
The arithmetic element (microprocessor) inside the airbag control unit may be defective, so during the unit's self-diagnosis it may transmit an erroneous signal. As a result, when the ignition switch is operated, the airbag may deploy.
On certain passenger vehicles, a microprocessor in the air bag control module, which activates the front air bags, the side air bags, the front seat safety belt pretensioners, and the battery safety terminal, may have a malfunction that could lead to an unintended activation of one or more of these components.
The filter structure at the atmospheric vent of the fuel evaporative emission control device (canister) is inappropriate. If the vehicle continues to be used in this condition, the atmospheric vent may become clogged, and pressure fluctuations inside the fuel tank may deform the fuel tank. In the worst case, the electrical wiring of the fuel pump may be severed, causing the engine to stop and making it impossible to restart.
Vehicle description: Passenger vehicles equipped with 18-inch tires. (18-inch tires are standard equipment on the m5 and optional equipment on the 7-series models). The machine used to mount and inflate the tires on the wheels at the assembly plant may have damaged the sidewall of one or more tires. The damaged area could weaken to the point where a sudden loss of air from the tire could occur.
In the brake light control circuit, some brake light switches have manufacturing defects. If these switches continue to be used in this state, the electronic circuit may fail, and in the worst case, the brake lights may flash or remain lit regardless of brake pedal operation.
Vehicle description: Passenger vehicles. The brake lamps in these vehicles are controlled by a switch activated by the movement of the brake pedal. This switch could fail internally, causing it to remain either in the "brake lamps off" position or in the "brake lamps on" position.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).