Steering: Steering wheel/handle bar
The zinc plating operation performed on the upper steering column shaft coupling bolt caused hydrogen embrittlement and breakage of the bolt.
🔔 Create a free account to get email alerts about Dodge Dynasty (all generations)
The zinc plating operation performed on the upper steering column shaft coupling bolt caused hydrogen embrittlement and breakage of the bolt.
A steering column coupling bolt may fracture due to hydrogen embrittlement, causing loss of clamping load on the steering column shaft coupling with resultant loss of steering control. Correction: Zinc plated steering column coupling bolts will be replaced with a phosphate coated bolt.
Water leaking under windshield cowl in area above heater blower motor resistor block results in corrosion of the resistor terminals.
Air bag inflator modules may not contain diffuser holes between the ignitor and propellant chambers.
The engine valve cover gasket may dislocate and allow an engine oil leak at the gasket.
The abs hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.
The anti-lock brake system high pressure hose may leak or detach at its crimped end fitting resulting in the discharge of hydraulic fluid.
Front outboard safety belt may become difficult to latch and or unlatch due to a webbing stiffener entering the buckle housing and dislodging the buckle latch guide.
Front disc brake caliper guide pin bolts may not have been adequately torqued and could loosen.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).