Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

BMW M6

1983–2019 · 3 générations · 1 défauts documentés · 3 marchés
Générations

Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.

Année modèle
MarchéTousNA
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · bulletin constructeur10193494Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréFreinsNA

Bulletin

Visual Inspection of Brake discs/Rotors for new car deliveries

NHTSA · bulletin constructeur10215023Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréCarrosserieNA

Bulletin

Lane Change Warning Lamps on Side View Mirrors Are Too Dark. The lane change warning lamps (small and triangle-shaped) on the exterior door mirrors are too dark. This may occur when driving from light to dark conditions, such as: * Entering a tunnel * At twilight CAUSE: RLSS (Rain Light Solar Sensor) hardware error.

NHTSA · bulletin constructeur10162435Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).

NHTSA · bulletin constructeur10162434Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.

NHTSA · bulletin constructeur10162395Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

"The customer complains that the ""low engine oil"" message is displayed too frequently. CAUSE The cause is related to, but not limited to, one or more of the following components and systems shown below: * Turbocharger * Crankcase ventilation * Engine gasket leaks * Internal engine tolerances and sealing * Improper filling or topping up Use the troubleshooting procedure below to help identify the cause."

NHTSA · bulletin constructeur10152343Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

"N63 and S63 Engine: Upper Oil Pan Removal and Installation Procedures. INFORMATION When removing and/or installing the N63 or S63 engine ""upper"" oil pan assembly, the oil pan can sustain damage if this operation is not performed correctly. Before loosening or tightening the upper oil pan bolts as per Repair Instruction 11 13 010 ""Removing and installing /replacing upper oil sump (N63),"" the steps outlined in the attachment of this bulletin must be followed. Refer to attached document and the instruction section that applies to the procedure being carried out. The ISTA/D repair instructions are currently being revised."

NHTSA · bulletin constructeur10151400Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

N63 and S63 Engine: Valve Seal Replacement This Service Information bulletin and attachment supersedes SI B11 08 15 dated March 2016. Refer to the following applicable SIBs before replacing the valve seals. SI B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repairs SI B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints SI B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity SI B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine Excessive engine oil consumption Spark plugs fouled with engine oil

NHTSA · bulletin constructeur10151301Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

This Service Information bulletin and attachment supersedes SI B11 08 15 dated November 2015. SUBJECT N63 and S63 Engine: Valve Seal Replacement. Refer to the following applicable SIBs before replacing the valve seals. SI B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repairs SI B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints SI B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity SI B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine Excessive engine oil consumption Spark plugs fouled with engine oil

NHTSA · bulletin constructeur10151248Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

This Service Information bulletin and attachment supersedes SI B11 08 15 dated November 2015. SUBJECT N63 and S63 Engine: Valve Seal Replacement. Refer to the following applicable SIBs before replacing the valve seals. B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repairs B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine Excessive engine oil consumption Spark plugs fouled with engine oil

NHTSA · bulletin constructeur10151165Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréHabitacleNA

Bulletin

Service Action: Replace Integrated Chassis Control Module (ICM). Due to a hardware fault in the ICM control module, an error code may be stored during engine start. If this condition were to occur, the airbag warning lamp would illuminate and be accompanied by a Check Control Message and acoustic warning.

NHTSA · bulletin constructeur10150376Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

Service Action: CIC - Install Navigation Road Map Database 2013. The Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).

NHTSA · bulletin constructeur10150389Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

"Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD). Note: The INITIAL enabling code ""FSC CIC map, N. America 2013 INITIAL"" is necessary to start the installation process and to activate the road map database."

NHTSA · bulletin constructeur10150334Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréSuspensionNA

Bulletin

Squeaking Noises when Steering Wheel Is Turned. There are squeaking noises from the steering spindle when the steering wheel is turned. The steering spindle sleeve's plastic bearing is insufficiently lubricated or not lubricated at all.

NHTSA · bulletin constructeur10150070Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

N63 and S63 Engine: Valve Seal Replacement. Refer to the following applicable SIBs before replacing the valve seals. * B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repair * B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints * B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity * B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. * Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine in addition to excessive engine oil consumption * Spark plugs fouled with engine oil and excessive engine oil consumption * Excessive engine oil consumption All Vehicles: On vehicles, where an excessive oil consumption between services is the only complaint, a complete oil consumption test as described in SI B11 03 13, must be performed first before replacing the valve seals. On vehicles exhibiting reproducible smoking from the tailpipe when hot, additional engine diagnostic steps (e.g. engine compression test, leak-down tests; inspection of the crankcase ventilation lines and turbo intake/outlet tubes for excessive oil accumulation) should be performed and documented prior to replacement of the valve seals, in order to eliminate other possible causes. Refer to the SIBs listed above for important diagnostic tips. Do not remove the intake manifolds to clean the intake valve carbon.

NHTSA · bulletin constructeur10149960Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréÉlectroniqueNA

Bulletin

N63TU Engine: Engine Oil Consumption. The customer complains that the "low engine oil" message is displayed too frequently. CAUSE The cause is related to, but not limited to, one or more of the following components and systems shown below: z Turbocharger z Crankcase ventilation z Engine gasket leaks z Internal engine tolerances and sealing z Improper filling or topping up Use the troubleshooting procedure below to help identify the cause.

NHTSA · bulletin constructeur10148417Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

S63TU Engine: Noises from Leaking Exhaust Manifold. A rattling, knocking, clattering or hissing noise can be heard from the engine compartment while the engine is running. It is more pronounced when the engine is under load. CAUSE The exhaust manifold attaching screws have come loose, causing an exhaust leak.

NHTSA · bulletin constructeur10148251Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

N63 Engine: Valve Seal Replacement. Refer to the following applicable SIBs before replacing the valve seals. ? B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repairs ? B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints ? B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity ? B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. ? Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine ? Excessive engine oil consumption ? Spark plugs fouled with engine oil

NHTSA · bulletin constructeur10147808Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

?N63 Engine: Valve Seal Replacement. Refer to the following applicable SIBs before replacing the valve seals. B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repairs B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine Excessive engine oil consumption Spark plugs fouled with engine oil.

NHTSA · bulletin constructeur10147759Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréAutreNA

Bulletin

SERVICE ACTION: REPLACE CONVERTIBLE TOP COMPARTMENT LID TRIM. Temporary convertible top compartment cover trim was installed in production due to parts shortage. Vehicle cannot be delivered while equipped with temporary cover. Temporary trim does not provide adequate seal.

NHTSA · bulletin constructeur10146681Années modèle 2017Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

N63 and S63 Engine: Valve Seal Replacement This Service Information bulletin replaces SI B11 08 15 June May 2017 What's New: Diagnostic tips updated. Refer to the following applicable SIBs before replacing the valve seals. B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repair B11 07 12 - N63 Engine: Oil Consumption and/or Rough Running Complaints B11 01 13 - N63 Engine: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity B11 03 13 - Engine Oil Consumption (all models) If the valve seals are leaking, one of the following will help determine if the seals should be replaced. Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine in addition to excessive engine oil consumption Spark plugs fouled with engine oil and excessive engine oil consumption Excessive engine oil consumption Vehicles with less than 40,000 miles should not be considered for valve seal replacement. All Vehicles: A complete oil consumption test, as described inSI B11 03 13, must be performed first, before replacing the valve seals. Do not remove the intake manifolds to clean the intake valve carbon.

NHTSA · bulletin constructeur10146706Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinModéréMoteurNA

Bulletin

Bmw: Check coolant message illuminated. According to the dealer there are traces of coolant leaking into the engine compartment at the turbochargers. Vehicles with s63t engine. *kb

NHTSA · bulletin constructeur10053584Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (E63/E64) · 2005–2011
BulletinModéréSuspensionNA

Bulletin

Bmw: Tire warning light illuminated due to low ambient temperature. Model e90, e91(3 series);e92, e92 (3 series); e60 (5 series); e60 (m5); e63, e64 (6 series); e63, e64 (m6); e65, e66 (7 series); e70 (x5); e83 (x3); and e85, e86 (z4). *pe

NHTSA · bulletin constructeur10032988Années modèle 2007Affiché en anglais d’origine · traduction en attenteVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinMineurAutreNA

Bulletin

Programme de geste commercial « Enhanced » MINI, autorisé par le concessionnaire (DSA)K

NHTSA · bulletin constructeur10216757Années modèle 2016Traduit automatiquement · original : anglaisVoir le détail →
M6 (F06/F12/F13) · 2012–2019
BulletinMineurMoteurNA

Bulletin

Transition de la référence de l'huile moteur MINI et huiles moteur du millésime 2016

NHTSA · bulletin constructeur10216758Années modèle 2016Traduit automatiquement · original : anglaisVoir le détail →
Plus anciens →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).