Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Citroën C1

2005–2022 · 2 générations · 15 défauts documentés · 2 marchés
Générations
Année modèle
MarchéTousEUJPUK
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014
RappelCritiqueMoteurUK

Possibility of fuel leak

It has been identified that during the fuel tank production process the joint between the tank and the fuel supply pipe assembly may not have been produced to the correct standard. Should this indeed be the case leakage from the supply pipe area of the fuel tank might occur.

DVSA · Royaume-Uni7 nov. 2007R/2007/165Années modèle 2007Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RappelModéréSuspensionJP

かじ取ギヤボックス

ステアリングコラムシャフトとステアリングギアボックスを接続するボルトの取付けが不適切なため、当該取付部の結合力が不足しているものがある。そのため、かじ取り操作等により当該取付部が分離して、最悪の場合、かじ取り操作ができなくなるおそれがある。

MLIT · Japon11 janv. 20191227720Années modèle 2018Affiché en japonais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
RappelModéréSuspensionUK

Steering column may fail unexpectedly

A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.

DVSA · Royaume-Uni27 juin 2016R/2016/136Années modèle 2014Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
RappelModéréCarrosserieUK

Bumper may not perform as designed in a collision

Affected vehicles may have a small defect in the front bumper frame. This may affect its impact absorption in the even of a collision.

DVSA · Royaume-Uni30 janv. 2015R/2015/024Années modèle 2014Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
RappelModéréFreinsUK

Loss of control

The front shock absorber rod may have an internal fault which could cause it to brake. This could have an adverse affect on the front suspension and the driver's ability to control the vehicle.

DVSA · Royaume-Uni19 déc. 2014R/2014/173Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
RappelModéréSuspensionUK

Rear cross-member may fail and cause driver to lose control

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

DVSA · Royaume-Uni25 févr. 2014R/2014/028Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
RappelModéréMoteurUK

Engine may fail

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

DVSA · Royaume-Uni14 nov. 2012R/2012/129Années modèle 2010Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
RappelModéréSuspensionUK

Suspension may fail

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

DVSA · Royaume-Uni20 juin 2011R/2011/070Années modèle 2011Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
RappelModéréMoteurUK

Engine may fail

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

DVSA · Royaume-Uni5 nov. 2010R/2010/192Années modèle 2010Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 II (AB40) · 2014–2022
RappelModéréAutreUK

Accelerator pedal may fail to return to idle

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

DVSA · Royaume-Uni19 févr. 2010R/2010/012Affiché en anglais d’origine · traduction en attenteVoir le détail →
C1 I (PM/PN) · 2005–2014
RappelModéréSuspensionUK

Wheel studs may become loose

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

DVSA · Royaume-Uni28 juil. 2009R/2009/075Années modèle 2009Affiché en anglais d’origine · traduction en attenteVoir le détail →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).