Motorrijtuigen - carrosserie (zitplaatsen)
De steun van de zitlengteverstelling van de voorstoelen kan niet goed zijn gelast.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su BMW Serie 7 (tutte le generazioni)
De steun van de zitlengteverstelling van de voorstoelen kan niet goed zijn gelast.
The �seat module� control unit controls the seat functions and after initialisation continuously transmits the seat position to the airbag control unit. A software error can lead to the loss of the initialisation function.
ヘッドエアバッグ装置のインフレーター(膨張装置)において、製造時の湿度管理が不適切なため、ガス発生剤が吸湿している可能性がある。そのため、ヘッドエアバッグ作動時にインフレーターの圧力が高くなりすぎて、インフレーターから点火装置が外れたり、ヘッドエアバッグが正常に作動しなかったりして、乗員が負傷するおそれがある。
Curtain airbags may have propellant which may have a humidity level higher than specification and in the event of a collision may not deploy correctly increasing the risk of injury.
Issue: On certain cars, there may be a problem with the side curtain airbag inflators. This could cause the airbags to inflate with more force than normal in a crash. It could also cause the airbag inflator to separate. If this happens, pieces could be propelled toward the occupants. Safety Risk: An airbag that does not work properly could create an increased risk of injury in a crash. Corrective Actions: To reduce the safety risk, BMW recommends that you should not carry any passengers in your car until the recall repairs are completed. BMW will notify owners by mail and instruct you to take your car to a dealer to replace the left and/or right head curtain airbags, as necessary.
null The airbag central sensor has been programmed with faulty software. In the event of an accident requiring activation of the passive safety systems, the seat-belt tensioner, front airbags and active head restraints will not be activated, increasing the risk of injury to the occupants.
It has been identified that the airbag/SRS central sensor has been programmed with faulty software. If the vehicle is involved in a frontal or rearward collision then the airbag and seat belt tensioners may not be triggered which could lead to an increased risk of injury to the occupants.
On certain vehicles, a Sensor Cluster Unit (SCU) having incorrect programming may have been installed in error by dealers during servicing. As the SCU helps determine if the driver and/or passenger airbags, seat belt pretensioners and active head restraints should be deployed during a crash, incorrect programming could result in an inadequate activation of one or more of these restraint systems in a crash. This could increase the risk of injury to occupants. Correction: Dealers will replace the SCU. Note: In the interim, owners are advised to stop operating their vehicle until the defect has been repaired.
Due to vibrations particles inside the airbag control unit may cause a short circuit. This may reset the control module illuminating the airbag warning lamp and prevent the airbag(s) from acting as intended during a collision.
에어백 컨트롤 유닛의 제작 결함으로 드문 경우 에어백이 정상적으로 전개되지 않을 수 있는 결함
エアバッグコントロールユニットにおいて、製造時の洗浄が不適切なため、ユニット内部に異物が残っていることがある。そのため、走行時の加速、減速によって異物が当該ユニットの電子基板の素子に接触し、素子間で電流が通電すると、エアバッグの警告灯が点灯して一時的にエアバッグの作動が停止し、最悪の場合、衝突時にエアバッグが展開しないおそれがある。
Bij sterke acceleratie of vertraging, zoals tijdens een ongeval, kan een metaal deel losraken in de airbagregeleenheid. Indien dit deel contact maakt met de printplaat kan dit een kortsluiting veroorzaken.
null There might be a metallic stamping residue inside the housing of the airbag control unit. In case of a crash, it might come into contact with the circuit board and cause a short circuit. As a result, the airbags would not deploy, thus increasing the risk of injury to the occupants.
On certain vehicles, the air bag control module housing may contain metallic particles which were left in the module due to a manufacturing process error. These particles could contact components within the module, which could cause a short circuit and briefly render the module inoperative, which could affect deployment of air bags and seatbelt pretensioners in a crash (where deployment is warranted) which could increase the risk of injury to vehicle occupants. Correction: Dealers will replace the air bag control module. Note: The short circuit would result in the air bag light illuminating.
BMW of North America, LLC (BMW) is recalling certain model year 2016 740Li, 750Li, and 750Lxi vehicles manufactured July 1, 2015, to December 11, 2015. The affected vehicles have an air bag control module that may randomly reset due to an electrical short circuit as a result of residual metallic particles from the manufacturing process.
On certain vehicles, the front passenger seat occupant detection mat can fatigue over time. As a result, the passenger airbag could deactivate, illuminating the airbag warning lamp and the passenger airbag ON/OFF lamp. Failure of the passenger airbag to deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correzione: ai veicoli verrà applicata una speciale copertura di garanzia estesa di 10 anni dalla prima immatricolazione. Nell'ambito di questo programma di copertura speciale, i veicoli che presentano questa condizione riceveranno la sostituzione del tappetino di rilevamento dell'occupante.
On certain vehicles, the front passenger seat occupant detection mat can fatigue during field usage depending on the seat configuration, vehicle geometry, manner and frequency of front passenger entry/exit. Over time micro cracks could develop in the side flanks of the mat, which could lead to a break of the conductive path and the system will recognize a failure and with exception of head protection system the front passenger air bag will be deactivated. The airbag On/Off lamp will be illuminated to make the occupants aware of the deactivation. Correction: The occupant detection mat will be granted a warranty extension of 10 years.
Mechanical loads exerted on the back-rest heating element of the front seats when persons enter or exit the vehicle may result in damage to the door side contact line in the back-rest padding. In the event that this causes a break of a contact line the damaged area may overheat to unacceptable levels with the heater switched on. It would then not be possible to rule out the risk of minor burns to the occupants clothes and possibly their skin.
On certain passenger vehicles equipped with front seat heating systems, upon entering and exiting the vehicle, excessive contact with the side bolster that is contained in the seat's backrest may damage the heating mat located in this area. If such damage were to occur, with the system turned on, the vehicle occupant may feel excessive heat from this area.
The front seat occupancy detector can fail to detect that a seat is occupied with the result that the front and associated side air bags and seat belt pre-tensioners may fail to operate in the event of a collision.
On certain passenger vehicles, the software programming of the driver's seat occupant detection system (ods) may not be able to reliably determine if the driver's seat is occupied.
On certain vehicles, the driver's seat occupant detection system may not be able to reliably determine if the driver's seat is occupied. As a result, it is possible that in certain crash conditions, the driver's front airbag, head protection system, safety belt pre-tensioner, and knee airbag may not deploy. Correction: Dealers will reprogram the driver's seat occupant detection system.
On certain 318I, 318IS, 325I, 325IS, 525I, 525IT, 535I, 735I, 735IL, 750IL, 850I and M5, the locking tab for the airbag contact ring in the steering wheel assembly could break without warning. If this happens it is possible that the contact ring wiring could break. This would cause the readiness indicator lamp ("SRS" or "AIRBAG") to illuminate and in such a case the airbag would not be available for deployment in a frontal impact. Correction: Locking tab will be replaced with one of a different design.
La linguetta di blocco dell'anello di contatto dell'airbag situata nel volante può rompersi senza preavviso.
통합 플랫폼 어시스트(IPA: Integration Platform Assistance) 컨트롤 유닛 생산 과정 오류로 내부 인쇄회로기판(PCB)이 손상되었을 수 있으며, 이런 경우 장기간 사용 시 운전자 지원 시스템이 정상적으로 작동하지 않거나 BMW 파노라믹 버전, 센트럴 인포메이션 디스플레이(CID), 헤드업 디스플레이(HUD) 등 디스플레이 장치가 작동하지 않을 수 있음. 해당 현상이 발생하는 경우 체크 컨트롤 메시지를 통해 운전자에게 경고가 제공되며 차량 운행 중 차량 속도를 포함한 차량 정보를 확인할 수 없어 안전 운행에 영향을 줄 수 있음이 확인됨에 따른 리콜 <대상차량별 생산일자> BMW 740 xDrive: 2026.07.13~20266..08.04 BMW iX3 50 xDrive: 20266.07.15~2026.08.06
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).