I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
For Dealer awareness, 24 MY DT Bed Step does not work for 25MY Trucks and forward. If replacing or installing new rear bed step, note that 24MY Bed Step part number 82215289A$ / 68276196A$ will not work on 25MY Trucks. 25MY Standard Truck requires 82216597A$ / 68582251A$. Use of incorrect step will cause contact to body and exhaust.
NHTSA · bollettino del costruttore11020606Anni modello 2025Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Yellow Warning Labels on the 3.0L Diesel Engines Cylinder Head Covers This bulletin outlines the correct procedure for all the repairs that involve: Fuel Injector(s). Cylinder head(s). Cylinder head cover(s). The engine may have a yellow warning label applied to the plastic cylinder head cover to alert the technician special procedures required for Injector Removal/Install. Failure to follow the procedure can result in excessive engine soot. If specific yellow warning labelsFig.1are applied on engine cylinder head cover(s), follow the procedures reported in this bulletin.During the following repairs:Fuel injector(s) replacement, removal and installation. Cylinder head replacement Cylinder head cover replacement.
NHTSA · bollettino del costruttore10229113Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Race Cool Down Feature Inoperative This bulletin involves installing a hood latch, adding a hood latch switch jumper harness and a Body Control Module (BCM) Reconfiguration. Customers may experience: The ?Race Cool Down? feature does not work.One of the inputs the vehicle looks at for this feature to work properly, is the hood closed status. If the vehicle was built without remote start, the hood latch will not have a close switch in the latch. No Diagnostic Trouble Codes (DTCs) will set for this issue.
NHTSA · bollettino del costruttore10229171Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Left Front Door Cup Holder Insert Missing This bulletin involves installing the missing cup holder in the driver?s interior door panel. Some customer?s may notice the cup holder insert is missing from left front door panel.
NHTSA · bollettino del costruttore10223680Anni modello 2017Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Yellow Warning Labels on the 3.0L Diesel Engines Cylinder Head Covers This bulletin outlines the correct procedure for all the repairs that involve: Fuel Injector(s). Cylinder head(s). Cylinder head cover(s). The engine may have a yellow warning label applied to the plastic cylinder head cover to alert the technician special procedures required for Injector Removal/Install. Failure to follow the procedure can result in excessive engine soot. If specific yellow warning labelsFig.1are applied on engine cylinder head cover(s), follow the procedures reported in this bulletin.During the following repairs:Fuel injector(s) replacement, removal and installation. Cylinder head replacement Cylinder head cover replacement.
NHTSA · bollettino del costruttore10223151Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Race Cool Down Feature Inoperative This bulletin involves installing a hood latch, adding a hood latch switch jumper harness and a Body Control Module (BCM) Reconfiguration. Customers may experience: The ?Race Cool Down? feature does not work.One of the inputs the vehicle looks at for this feature to work properly, is the hood closed status. If the vehicle was built without remote start, the hood latch will not have a close switch in the latch. No Diagnostic Trouble Codes (DTCs) will set for this issue.
NHTSA · bollettino del costruttore10223209Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Yellow Warning Labels on the 3.0L Diesel Engines Cylinder Head Covers This bulletin outlines the correct procedure for all the repairs that involve: Fuel Injector(s). Cylinder head(s). Cylinder head cover(s). The engine may have a yellow warning label applied to the plastic cylinder head cover to alert the technician special procedures required for Injector Removal/Install. Failure to follow the procedure can result in excessive engine soot. If specific yellow warning labelsFig.1are applied on engine cylinder head cover(s), follow the procedures reported in this bulletin.During the following repairs:Fuel injector(s) replacement, removal and installation. Cylinder head replacement Cylinder head cover replacement.
NHTSA · bollettino del costruttore10220769Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Race Cool Down Feature Inoperative This bulletin involves installing a hood latch, adding a hood latch switch jumper harness and a Body Control Module (BCM) Reconfiguration. Customers may experience: The ?Race Cool Down? feature does not work.One of the inputs the vehicle looks at for this feature to work properly, is the hood closed status. If the vehicle was built without remote start, the hood latch will not have a close switch in the latch. No Diagnostic Trouble Codes (DTCs) will set for this issue.
NHTSA · bollettino del costruttore10220827Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Missing (Power Wagon) Decals on Tailgate and Both Front Doors This bulletin involves inspecting and if necessary installing the ?Power Wagon? decals on the front doors and tailgate. Some of the (Sales Code A75) vehicles are missing the addition of the ?Power Wagon? decals for the tailgate and both front doors.
NHTSA · bollettino del costruttore10220600Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Yellow Warning Labels on the 3.0L Diesel Engines Cylinder Head Covers This bulletin outlines the correct procedure for all the repairs that involve: Fuel Injector(s). Cylinder head(s). Cylinder head cover(s). The engine may have a yellow warning label applied to the plastic cylinder head cover to alert the technician special procedures required for Injector Removal/Install. Failure to follow the procedure can result in excessive engine soot. If specific yellow warning labelsFig.1are applied on engine cylinder head cover(s), follow the procedures reported in this bulletin.During the following repairs:Fuel injector(s) replacement, removal and installation. Cylinder head replacement Cylinder head cover replacement.
NHTSA · bollettino del costruttore10212372Anni modello 2022Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Race Cool Down Feature Inoperative This bulletin involves installing a hood latch, adding a hood latch switch jumper harness and a Body Control Module (BCM) Reconfiguration. Customers may experience: The ?Race Cool Down? feature does not work.One of the inputs the vehicle looks at for this feature to work properly, is the hood closed status. If the vehicle was built without remote start, the hood latch will not have a close switch in the latch. No Diagnostic Trouble Codes (DTCs) will set for this issue.
NHTSA · bollettino del costruttore10212431Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Missing (Power Wagon) Decals on Tailgate and Both Front Doors This bulletin involves inspecting and if necessary installing the ?Power Wagon? decals on the front doors and tailgate. Some of the (Sales Code A75) vehicles are missing the addition of the ?Power Wagon? decals for the tailgate and both front doors.
NHTSA · bollettino del costruttore10188804Anni modello 2021Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Inspect Throttle Body Assembly This bulletin involves inspecting the Julian date on the throttle body and possibly replacing it. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P2100 - Electronic Throttle Control Motor Circuit/Open - Bank 1. The customer may also describe the vehicle is in limp home mode.
NHTSA · bollettino del costruttore10176584Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Inspect Throttle Body Assembly This bulletin involves inspecting the Julian date on the throttle body and possibly replacing it. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P2100 - Electronic Throttle Control Motor Circuit/Open - Bank 1. The customer may also describe the following:The vehicle is in limp home mode.
NHTSA · bollettino del costruttore10175556Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Sunroof Water Leak This bulletin involves testing the sunroof for leaks and replacing the power sunroof glass, if necessary. The customer may describe a water leak from A-pillar grab handle or headliner microphone.
NHTSA · bollettino del costruttore10175564Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Inspect Throttle Body Assembly This bulletin involves inspecting the Julian date on the throttle body and possibly replacing it. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P2100 - Electronic Throttle Control Motor Circuit/Open - Bank 1. The customer may also describe the following:The vehicle is in limp home mode.
NHTSA · bollettino del costruttore10175587Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Sunroof Water Leak This bulletin involves testing the sunroof for leaks and replacing the power sunroof glass, if necessary. The customer may describe a water leak from A-pillar grab handle or headliner microphone.
NHTSA · bollettino del costruttore10175151Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Inspect Throttle Body Assembly This bulletin involves inspecting the Julian date on the throttle body and possibly replacing it. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P2100 - Electronic Throttle Control Motor Circuit/Open - Bank 1. The customer may also describe the following:The vehicle is in limp home mode.
NHTSA · bollettino del costruttore10175143Anni modello 2019Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).