Bollettino
Incorrect Grille Installed Customers may comment on the following: SYMPTOM: The grille on the vehicle is chrome but should be black Fig. 1. This bulletin involves inspecting and possibly replacing the grille and nameplate.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Dodge Ram (tutte le generazioni)
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Incorrect Grille Installed Customers may comment on the following: SYMPTOM: The grille on the vehicle is chrome but should be black Fig. 1. This bulletin involves inspecting and possibly replacing the grille and nameplate.
When installing the new replacement pipe, do not remove or replace the O-ring that comes pre-installed on the new part. This O-ring is factory-fitted and must remain in place to ensure proper sealing and prevent leaks or fitment issues.
"Rear Air Spring Leak Customers may experience the following: An air leak from the rear air springs is causing the vehicle to lean to the left or right side, or lower at the rear. This bulletin involves inspecting and possibly replacing one or both rear air springs. "
"Rear Air Spring Leak Customers may experience the following: An air leak from the rear air springs is causing the vehicle to lean to the left or right side, or lower at the rear. This bulletin involves inspecting and possibly replacing one or both rear air springs."
Customer States Vehicle Is Overheating.
"Incorrect Floor Pan Installed Customer's vehicle may have been built with the following: Extra holes in floor pan under carpet. This bulletin involves covering open holes in the floor pan with butyl sealer and tape."
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
CONDENSER, Air Conditioning CONDITION 1: If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.
CONDENSER, Air Conditioning CONDITION 1: If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.
CV Boot Leak Inspection, Boot Inspection
CV Boot Leak Inspection, Boot Inspection
Intake Manifold, Intake Manifold Gaskets, Intake Manifold Bolts If the intake manifold is being removed for service and the vehicle build date is between 02/24/20 to 08/07/20, please inspect the intake manifold for cracks around the intake manifold mounting bolt holes. If cracks are found please replace the intake manifold and intake manifold mounting bolts with P/N 06510314AA or later, torquing the bolts to specification when installing. If no cracks are found around the mounting holes, the intake manifold is OK to re-install during re-assembly using NEW mounting bolts p/n 06510314AA or later and torquing to specification.
CONDENSER, Air Conditioning CONDITION 1: If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.
No Crank, No Start
Rear Stabilizer Bar Missing This bulletin involves inspecting for and if necessary installing a rear stabilizer bar. Inspect for and if necessary install rear stabilizer bar.
Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw.
CONDENSER, Air Conditioning If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet.
Water In Driver Foot Well - Park Release Cable Grommet Not Seated This bulletin involves seating the manual park release cable grommet to the cowl. The customer may describe water in the driver foot well. This water leak condition may be due to the manual park release cable grommet not being properly seated to the cowl during vehicle assembly.
Rear Stabilizer Bar Missing This bulletin involves inspecting for and if necessary installing a rear stabilizer bar. Inspect for and if necessary install rear stabilizer bar.
Noisy And/Or Weeping Rear Shock Absorber This bulletin involves inspecting the rear shock absorber dust covers to determine if they are plastic or metal, and if the dust covers are plastic, replace the rear shock absorbers. Rear shock absorbers may be noisy and/or weeping due to the incorrect shock absorbers being installed on the vehicle.
Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw.
Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw.
"Thermostat Housing Replacement This bulletin involves inspecting the bleed screw on the thermostat housing and if necessary replacing the thermostat housing. The customer may describe a coolant leak at the thermostat housing bleed screw."
Chrysler: See document search button for owner letter. On some trucks, at time of assembly, the rear stabilizer bar assembly was not installed. Model 2014 ram 3500. *pe
Chrysler: Ram 3500 cab chassis: Rear stabilizer bar assembly installation. See document search button for owners letter. *lj
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).