閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

BMW 3シリーズ E30

1982–1994 · 不具合15件 · 4市場
年式
リコール重大エンジンNA

Fuel System

On certain 318I, 318IC, 318IS, 325IC, 325IS, 325IX, 525I, 535I, 735I and 735IL vehicles, the fuel feed hose could harden and "set" over time due to engine compartment temperatures. If this "setting" occurs, it is possible that seepage between the hose and fitting could result because the clamp cannot provide sufficient sealing force to compensate for the hardening of the hose. Fuel seepage, in the presence of an ignition source, could result in an engine compartment fire. Correction: fuel feed hoses and associated clamps will be replaced with ones of a new design.

カナダ運輸省1994年5月30日1994096モデルイヤー 1989原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール重大エンジンNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.

NHTSA · 米国1994年4月11日94V066000モデルイヤー 1989原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール重大エンジンNA

Visibility:Defroster/defogger/hvac system:Heater core

The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.

NHTSA · 米国1993年2月1日93V015000モデルイヤー 1984–1989原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール重大電装NA

Heater And Defroster

On certain 318I vehicles, under certain conditions, the interior heater water control valve may bind while closing. This binding or slow-closing condition may cause the valve solenoid to draw excessive current, possibly resulting in overheating of the valve connector wiring and insulation. This condition could result in a passenger compartment fire.

カナダ運輸省1984年9月24日1984105モデルイヤー 1984原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度エンジンNA

Heater And Defroster

On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.

カナダ運輸省1993年7月19日1993100モデルイヤー 1984–1989原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度エンジンNA

Engine

On certain 325IX vehicles, the oil dipstick tube attaching bracket may have been bent during the manufacturing process or during scheduled maintenance. This could possibly cause the dipstick to interfere with the throttle bellcrank lever's range of motion and prevent the lever from returning to the idle position after release of the accelerator pedal. Correction: Throttle bellcrank lever will be modified to provide sufficient clearance. Note: Vehicles with manual transmission only.

カナダ運輸省1988年4月6日1988049モデルイヤー 1988原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度エンジンNA

Vehicle speed control:Cables

The oil dipstick tube attaching bracket may have been bent during production or scheduled maintenance, reducing the clearance between the dipstick ring and the throttle bellcrank lever.

NHTSA · 米国1988年3月15日88V031000モデルイヤー 1988原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度電装NA

Electrical Translation: 電気系統

On certain 325E, 325ES, 528E, 535I, 635CSI and 735I vehicles, the center high mounted brake light could add sufficient electrical load to cause the brake light switch to overheat, eventually leading to melting of the plastic internal switch parts. This could cause the switch plunger to jam in the ON or OFF position. This would render the brake light permanently ON or OFF regardless of brake pedal operation. Correction: A brake light switch with an increased current load capacity will be installed on affected vehicles.

カナダ運輸省1986年11月27日1986134モデルイヤー 1986–1987自動翻訳 · 原文:英語詳細を見る →
リコール中程度ブレーキNA

Exterior lighting:Brake lights:Switch

Brake light switch could overheat, eventually leading to melting of plastic internal parts in area of electrical contacts.

NHTSA · 米国1986年11月10日86V151000モデルイヤー 1986–1987原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度サスペンションNA

Steering

On certain 318I, 325, 325E and 325ES vehicles, when a significant force is applied directly to the steering gearbox as the result of certain frontal crash conditions or front end contact with an object on the road, the steering column disengagement element, which is designed to reduce the amount of steering wheel rearward travel, could disengage completely. This would result in loss of post impact steering maneuverability without prior warning. Correction: Two plates will be bolted to the disengagement element to ensure that the element will not completely disengage in the event of an impact to the steering gear.

カナダ運輸省1986年10月22日1986117モデルイヤー 1984–1986原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度サスペンションNA

Steering: Steering wheel/handle bar

The two parts of the steering column disengagement element could completely disconnect if the car contacts an object in the roadway or elsewhere of sufficient mass to apply a significant force directly to the steering gearbox. Consequence of defect: Steering control would be lost.

NHTSA · 米国1986年10月20日86V138000モデルイヤー 1985–1986原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度エンジンNA

Fuel system, gasoline:Carburetor system

The idle control valve which controls idle speed by varying the amount of intake air that bypasses the throttle plate is subject to backfire into the intake manifold. Such backfire can damage the valve and cause the idle valve plate to remain open. Consequence of defect: This will result in abnormally high idle speed.

NHTSA · 米国1985年5月6日85V058000モデルイヤー 1984原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール中程度エンジンNA

Engine

On certain 320I vehicles, crack in the exhaust system between the exhaust pipe and the catalytic converter could result in exhaust emissions which do not comply with CMVSS 1103.

カナダ運輸省1983年12月22日1983121モデルイヤー 1981–1982原文(英語)で表示中 · 翻訳待ち詳細を見る →
リコール軽微エンジンNA

Engine

On certain 318I vehicles, improper starting procedure could cause a backfire into the intake manifold and damage internal components of the idle control valve. This could result in abnormally high idle speed and if warnings of increased engine noise level and tachometer reading are not heeded, a vehicle crash could occur.

カナダ運輸省1985年6月6日1985072モデルイヤー 1984原文(英語)で表示中 · 翻訳待ち詳細を見る →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。