14287 - Customer Satisfaction Program. On certain 2003-2015 model year Chevrolet Express, 2003-2007 Chevrolet Silverado, 2008-2013 Chevrolet Silverado HD, 2003-2015 GMC Savana, 2003-2007 GMC Sierra 3500, and 2007-2012 GMC Sierra HD model vehicles equipped with a Duramax diesel engine and an engine-block heater (RPO YF2 and K05), continuously activating the engine-block heater through Ambulance body up fit ?shore power? may cause excessive heat buildup, cause a high-resistance short, damage the engine-block heater, or, in rare cases, melt electrical connections or cause an engine-compartment fire. Dealers are to: Replace block heater element with a revised heater equipped with EPDM O-Rings, shorter bolt and improved torque & angle. Disconnect the coolant heater from being powered whenever ?shore power? is plugged in. Add a label to the current cord, ?Avoid continuous use, for Cold Start Only?, unless the cord is damaged at either end, then replace the original cord. Provide the customer with an Owner?s Manual Insert found at the end of this bulletin.
Certain vehicles may have a damaged or missing fastener for the Electronic Brake Control Module (EBCM) heat shield. Dealers will replace the fastener with a new nut and bolt.
This service bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Malfunction Indicator Lamp (MIL) Illuminated DTC P023F or P129F Set.
This service bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Malfunction Indicator Lamp (MIL) Illuminated DTC P023F or P129F Set.
Customer Satisfaction Program. Certain vehicles may be missing the required rear vision camera video display because the wrong inside rearview mirror was installed. Dealers will inspect and replace the inside rearview mirror, if necessary.
This Preliminary information communicates for Technicians installing a Service Replacement Transmission Assembly to contact Technical Assistance to make sureunit is not suspect of a snap ring concern prior to installation.
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated and code P023F or P129F is found.
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated and code P023F or P129F is found.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。