燃料系統、ガソリン
低温環境での運転時、エンジンルーム内の燃料供給ホースと、プレッシャーレギュレーターおよびフューエルレールとの接続部から燃料が漏れる場合があります。
🔔 無料アカウントを作成して Dodge 600 のメール通知を受け取る
低温環境での運転時、エンジンルーム内の燃料供給ホースと、プレッシャーレギュレーターおよびフューエルレールとの接続部から燃料が漏れる場合があります。
コンビネーションメーターの電子回路内の抵抗器が、スイッチングトランジスタの故障により過大な電流にさらされる可能性があります。 不具合の結果:過熱した抵抗器が発火し、インストルメントパネルの火災を引き起こすおそれがあります。
On certain vehicles equipped with a 2.2 Litre turbo engine, an inadequately tightened fuel hose clamp at the fuel system pressure regulator could result in fuel leakage and provide the potential for an engine compartment fire.
An engine compartment fuel hose routed to the fuel system pressure regulator may have an inadequately tightened hose clamp. Consequence of defect: The fuel hose could leak and result in an engine compartment fire.
The potential for fuel leakage exists in the engine compartment at the fuel reservoir seam and its hose connections. The fuel reservoir is a silver colored can mounted to the air cleaner.
On certain vehicles, hydraulic brake tube may interfere with exhaust system hangar bolt and eventually result in brake fluid leakage. This could create a partial loss of braking capability. Should this occur the brake warning light on the instrument panel will warn driver.
電動調整式バケットシートを装備した車両では、運転席のシートフレームが4か所の取り付け部のいずれかで破損するおそれがあります。その結果、シートが前後方向または左右方向に動く可能性があります。これにより車両の操縦能力を失い、車両事故につながるおそれがあります。 是正措置:運転席のシートフレームを強化品に交換します。また、パワーアジャスター・クロスメンバーを補強します。
前部サスペンションクロスメンバーは、除雪のために塩散布が行われる地域で使用されると、ロアコントロールアーム後部ピボット取付部で腐食し、破損するおそれがあります。
運転席のフレームは、4つのアタッチメントのうち1つ(前部/外側)で疲労故障を起こすことがあります。
On certain vehicles, the crossmember can become abnormally corroded at the lower control arm attachment. This could result in lower control arm separation and loss of vehicle control. Correction: crossmembers will be inspected and replaced if corrosion is excessive. Remainder will have crossmember retaining brackets installed. Wait, I need to translate this into Japanese, not repeat the English. Here is the translation: 特定の車両では、ロアコントロールアームの取付部分でクロスメンバーが異常に腐食することがあります。これにより、ロアコントロールアームが分離し、車両の制御を失うおそれがあります。対策:クロスメンバーを点検し、腐食が過度な場合は交換します。それ以外の車両には、クロスメンバー固定ブラケットを取り付けます。
Vehicles equipped with power seats that have had a seat cushion frame replacement in the field could experience cushion frame failure resulting in significant rearward movement of the seat back. This could result in loss of vehicle control and a possible crash. Correction: Seat cushion frame will be inspected and replaced if required.
A service replacement drivers seat cushion (manual seat type) may contain wrong cushion with a brace that could interfere with power seat adjuster mechanism and cause stress on the frame.
These vehicles do not comply with c.M.V.S.S. 1103 - exhaust emissions. Plugged choke vacuum delay valve. Note: Vehicles equipped with 2.2 litre carbureted engines.
Location of hydraulic brake tube to both rear wheels causes interference and chafing between the tubes and rear suspension trailing arm pivot brackets.
Hydraulic brake tubing routed to the left rear wheel brake system may have been bent out of shape during assembly and could chafe against the exhaust system hanger bolt.
The travel computer system wiring, on the involved vehicles, may be improperly connected. This condition can cause damage to internal components.
On certain vehicles, if the travel computer system wiring is connected to the wrong ignition coil terminal, the internal components of the interface module may be damaged, which can affect the engine ignition system and possibly cause loss of ignition, resulting in the engine being unable to restart.
The involved vehicles may be equipped with an electrical fuel filler door release which is activated through a coiled current carrying wire (a solenoid). A short in the solenoid could cause sparking at the attaching screws of the solenoid.
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。