閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Mazda CX-3

2014– · 1 世代 · 不具合13件 · 3市場
世代
すべての世代CX-32014–1330207

技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。

年式
技術通報中程度ボディNA

技術通報

本技術速報は、以下に記載の既に発行された技術速報を差し替えるものです。変更箇所は赤色で示されています。 09-012/21 12/13/21、06/10/21 および 04/27/21 **症状** 一部のお客様において、以下の症状すべてが発生する場合があります。 1. リモコンのボタンを使用したドアのロック/アンロック操作ができない。 2. ドアロック/解除タッチセンサーを使用したドアのロック/アンロック操作ができない。 3. イグニッションスイッチを使用してエンジンが始動しない。 4. トランスミッターが単独で作動する。 5. キーの電池が通常より早く消耗する。 症状1~3:リモートトランスミッターに過大な荷重が加わると、電気端子が変形して電池との接触が不良になることがあります。この問題を解消するため、リモートトランスミッター内部の構造を変更し、電気端子の変形を抑えるようにしました。 症状4~5:リモートトランスミッターに過大な荷重が加わると、ガスケット周辺に隙間が生じ、そこから水分が侵入して回路基板を腐食させることがあります。その結果、キーの電池が通常より早く消耗します。この問題を解消するため、ガスケット取り付け面のケース壁厚を増し、部品の接着強度を向上させて変形を防止するようにしました。 **修理手順** 電池が不良である場合、または正しく取り付けられていない場合は、電池を交換するか、正しく取り付け直してください。リモート省電力機能がオフになっており、電池が良好で正しく取り付けられている場合は、MGSS(イモビライザーシステム関連部品のプログラミング)の手順に従い、不良のリモートトランスミッターを改良品に交換してください。 注意:その他のリモートトランスミッターに不具合が発生していない場合、車両のほかのリモートトランスミッターは交換しないでください。

NHTSA · メーカー通報11034436モデルイヤー 2021自動翻訳 · 原文:英語詳細を見る →
技術通報中程度電装NA

技術通報

Some customers may experience the following symptoms of the wireless charger (Qi), even when the mobile device (smartphone etc.) is placed in the proper position on the wireless charger (Qi). It does not start charging. It stops charging with the indicator flashing in red after starting. It stops charging without any visible sign after starting. For CX-50, some customers may experience that despite placing the MagSafe-equipped iPhone at the center of the wireless charger, charging stops after about ten seconds. MagSafe-equipped iPhones use magnets to align the charger and the device. When charging MagSafe-equipped iPhones with a non-MagSafe compatible charger, improper alignment can cause the magnetic field required for charging to be disrupted by the magnets, significantly reducing charging efficiency.

NHTSA · メーカー通報11012342モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

MNAO has recently found an increase in non-returned cores within the United Radio (UR) exchange program. As a reminder, dealers have 90 days, after the order is placed, to return the exchanged part. Failure to return the exchanged part will result in a debit of the full component price. It is highly recommended to set a calendar reminder at the time of the order for no more than 60 days to ensure all orders are returned if repaired and if not repaired, contact the customer to cancel the order and return the unit.

NHTSA · メーカー通報10243559モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

Some customers may experience the following symptoms of the wireless charger (Qi), even when the mobile device (smartphone etc.) is placed in the proper position on the wireless charger (Qi). - It does not start charging. - Soon after starting, it stops charging with the indicator flashing in red. - Soon after starting, it stops charging without any visible sign. These symptoms may be caused by improper control software of the wireless charger (Qi). To eliminate these concerns, the specification of the wireless charger (Qi) has been modified. NOTE: The modifications for the symptoms are different depending on the model.

NHTSA · メーカー通報10243549モデルイヤー 2021原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ブレーキNA

技術通報

Some vehicles may experience a lack of power and the check engine light on with DTC P061B:00 stored in PCM memory under one of the following conditions (A or B). - DTC P061B:00 - [PCM] Internal control module torque calculation performance problem. Condition Condition Description A When cranking is interrupted (likely occurs when the brake pedal is released during cranking) B When accelerating from 1300-1600 rpm with wide open throttle Due to an improper control logic of the PCM, the engine torque calculation error detection is too sensitive. To eliminate this concern, the PCM software has been modified.

NHTSA · メーカー通報10218722モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

When installing a navigation SD card, confirm that the card is unlocked. Also, Mazda Does Not Recommend swapping navigation system SD cards from one vehicle to another for testing. If swapped, the SD card that is installed into the other vehicle becomes linked to the VIN of that vehicle.

NHTSA · メーカー通報10185967モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

Some vehicles may experience a Tire Pressure Monitoring System (TPMS) warning light improperly illuminates when driving on a smooth road surface even if the TPMS system has been properly initialized at the specified tire air pressure. Please contact the Hotline for a countermeasure repair if a vehicle arrives with this issue. A countermeasure control module is due in July for this concern.

NHTSA · メーカー通報10185959モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ボディNA

技術通報

Some vehicles may experience one of the following 2 symptoms, even though the windshield is clear. Under certain driving conditions, the Forward Sensing Camera (FSC) may detect a dirty windshield (not clear). NOTE FOR CUSTOMER: The FSC may not work properly under the conditions: The windshield is not clear. The FSC lens is not clear. Driving in heavy rain, dense fog or snow, or into the sun. Driving on a road with no or blurred road lane markings. When the windshield becomes foggy in the winter time or other cold weather conditions and LDWS/HBC warning lights turn on, drive with the defroster on for about 10 minutes. This will help clear the foggy windshield at the FSC.

NHTSA · メーカー通報10185957モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

Some vehicles may exhibit a knocking / squeaking noise from the front shock absorber when driving on rough roads and/or when turning the steering wheel while the vehicle is stopped.

NHTSA · メーカー通報10185907モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

Some customers may complain that the steering wheel is off center more than 3" even when driving straight on a flat road.

NHTSA · メーカー通報10185904モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

Ldws and hbc warning lights on and dtc c1001:92

NHTSA · メーカー通報10186336モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

A/C blows warm air. Some customers may complain about warm air from the climate cointrol vents. This may be caused by improper brazing (A) of the evaporator (B) causing a refrigerant leak fr om the joint between the tubes and the header (D)

NHTSA · メーカー通報10186252モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ボディNA

技術通報

A/C blows warm air. Some customes may complain about warm air from the climate control vents. This may be caused by condenser corrosion, causing a refrigerant leak.

NHTSA · メーカー通報10185803モデルイヤー 2016原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

If you experience issues with the current version of ID's such as missing tools or modules not showing after completing a network test, be advised that we are aware of these issues and are working to resolve them. As a counter measure, it is advised that you un-install ids and re-install version 103.00 and "do not update" until further notice.

NHTSA · メーカー通報10185813モデルイヤー 2017原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

On May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing new lug nuts or the accessory Wheel Lock Set, make sure to use the appropriate part number for the vehicle you are working on. NOTE: The Mazda3 produced in Mexico is not affected. Use the GEPC or the Mazda Accessory web site [MXConnect (dealers.mazdausa.com)] to look up the correct part number for the vehicle you are working on.

NHTSA · メーカー通報10168119モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

On May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing the accessory locking lug nuts, make sure to use the appropriate part number for the vehicle you are working on.

NHTSA · メーカー通報10159199モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

On May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing new lug nuts or the accessory Wheel Lock Set, make sure to use the appropriate part number for the vehicle you are working on.

NHTSA · メーカー通報10159196モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ブレーキNA

技術通報

Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction).Master Warning Light, Smart Brake Support/Smart City Brake Support (SBS/SCBS) Indicator Light, Lane-keep Assist System (LAS) Lane Departure Warning System (LDWS) Warning Light, High Beam Control (HBC) system Warning Light (amber). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by a hardware failure of an internal device of the FSC, which results in a malfunction detection. To eliminate this concern, the production process of the FSC has been modified.

NHTSA · メーカー通報10155440モデルイヤー 2018原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

Subject: Mazda Service Program (MSP) 53. 2019 CX-3 & 2018-2019 MX-5 With Direct Tire Pressure Monitoring System (TPMS) Panic Alarm System Activates While Driving. Mazda Motor Corporation has decided to conduct a Mazda Service Program (MSP) on certain 2019 CX-3 vehicles produced from February 27, 2018 through October 12, 2018 and 2018-2019 MX-5 vehicles produced from October 3, 2017 through October 15, 2018. On certain subject vehicles equipped with Direct TPMS (TPMS wheel sensor is directly mounted on each wheel), it is possible that the panic alarm system may activate while driving, and the horn may sound intermittently, and hazard warning lights may flash. The panic alarm concern will stop after cycling the ignition switch off, then on again. No DTCs are stored. Action Required: Beginning today, reprogram the body control module (BCM) to the latest calibration using MMDS for all affected CX-3 and MX-5 vehicles in dealer inventory, and when customers bring their vehicles for maintenance, or other service/warranty work. The subject vehicles must not be delivered to customers until the repair of MSP53 is completed. Please inform the customer that the BCM will be reprogrammed to the latest calibration, free of charge. If a vehicle is sold with an open MSP53 your Step 3 PDI warranty claim will be subject to debit.

NHTSA · メーカー通報10154528モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

On certain subject vehicles, it is possible that the panic alarm system may activate while driving, and the horn may sound intermittently and hazard warning lights may flash. The panic alarm concern will stop after cycling the ignition switch off, then on again. No DTCs are stored. Some TPMS wheel sensor IDs on the concerned vehicle or other vehicles nearby may cause the error in the body control module (BCM). Air pressure data transmitted from the wheel sensors may be recognized by the BCM as if the panic button on the remote transmitter has been pressed.

NHTSA · メーカー通報10154531モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度電装NA

技術通報

Some customers may experience a SBS/SCBS, LAS/LDWS and/or HBC warning light on. A system error message may also be found in the center display. DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction). DTC U3000:04-0A (Forward sensing camera (FSC) internal malfunction) is stored in the FSC module and cannot be erased. This concern may be caused by an internal FSC failure. To eliminate this concern, the production process of the FSC has been modified.

NHTSA · メーカー通報10154454モデルイヤー 2018原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度サスペンションNA

技術通報

As of May 1, 2018, Japan produced vehicles use 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing new lug nuts or the accessory Wheel Lock Set, make sure to use the appropriate part number for the vehicle you are working on. NOTE: The Mazda3 produced in Mexico is not affected.Use the GEPC or the Mazda Accessory web site [MXConnect (dealers.mazdausa.com)] to look up the correct part number for the vehicle you are working on.

NHTSA · メーカー通報10153226モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度その他NA

技術通報

On May 1, 2018, Japan produced vehicles starting using 17 mm hex lug nuts instead of 21 mm on the same size thread. When installing the accessory locking lug nuts, make sure to use the appropriate part number for the vehicle you are working on.

NHTSA · メーカー通報10153304モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ブレーキNA

技術通報

Some vehicles may experience a lack of power and the check engine light on with DTC P061B:00 and U0401:00 stored in the PCM memory when engine cranking is interrupted and on A/T vehicles, DTC U0442:00 is also stored. This concern most likely occurs when the brake pedal is released during engine cranking. DTC P061B:00 - [PCM] Internal control module torque calculation performance problem. DTC U0401:00 - Signal error from PCM DTC U0442:00 - [TCM] Invalid data received from PCM. Due to an improper control logic of the PCM, the engine torque calculation error detection is too sensitive. To eliminate this concern, the PCM software has been modified.

NHTSA · メーカー通報10148004モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
技術通報中程度ブレーキNA

技術通報

Some vehicles may experience a check engine light on and/or failsafe with DTC P061B:00 stored in the PCM. This condition will likely occur as a result of one of the following causes: Engine cranking was interrupted by releasing the brake pedal. Start button was double pressed while the engine was still cranking. A countermeasure to correct mis-detection is currently being prepared.

NHTSA · メーカー通報10144336モデルイヤー 2019原文(英語)で表示中 · 翻訳待ち詳細を見る →
古いもの →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。