閲覧無料 · 投稿は無料アカウントでAnticars(2000年)の後継

Mazda トリビュート

2000–2011 · 2 世代 · 不具合19件 · 4市場
世代

技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。

トリビュート II · 2007–2011
技術通報重大エンジンNA

技術通報

On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system.When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur tooxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.

NHTSA · メーカー通報10153311モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報重大エンジンNA

技術通報

On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system. When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur to oxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.

NHTSA · メーカー通報10145242モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度その他NA

技術通報

MRTの新たな流通に合わせて、マツダは2019年3月より、新しい多目的診断用リークディテクターをディーラーへ出荷します。トレーニング動画は間もなくMGSSに掲載され、ワークショップマニュアルの手順は段階的に改訂される予定です。

NHTSA · メーカー通報10154879モデルイヤー 2011自動翻訳 · 原文:英語詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or equivalent balance machine, sublet the vehicle out for repair. To find the location of a GSP9700 near your dealer, visit Hunter's web site at www.gsp9700.com and click on "Locate a GSP9700 Road Force Balancer." Translation: 車両の走行中にボディの振動やステアリングホイールのシミー(ハンドルのぶれ)が発生し、その根本原因がタイヤのバランスであると判断された場合は、Hunter GSP9700または同等のバランサーマシンを使用してタイヤのバランスを再調整してください。販売店にGSP9700または同等のバランサーマシンがない場合は、修理を外部業者に委託してください。お近くの販売店でGSP9700を探すには、Hunter のウェブサイト www.gsp9700.com にアクセスし、「Locate a GSP9700 Road Force Balancer」をクリックしてください。

NHTSA · メーカー通報10154139モデルイヤー 2011自動翻訳 · 原文:英語詳細を見る →
トリビュート II · 2007–2011
技術通報中程度その他NA

技術通報

This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.

NHTSA · メーカー通報10153331モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · メーカー通報10153318モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ブレーキNA

技術通報

Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit. Tool Number Description Pricing PC1923MAZ Pro-Cut On-Car Brake Lathe Check eStore or call for current pricing OBTAINING TOOLS This tool can be ordered through Mazda eStore. You can log on to eStore at: http://dealers.mazdausa.com CUSTOMER SERVICE INFORMATION For warranty or product information contact Mazda Authorized Service Equipment at 877-768-6657. Customer service representatives are available from 7:30 AM until 7:00 PM CST, Monday through Friday. SPECIAL SERVICE TOOL (SST) PART NAME: OVERVIEW Pro-Cut On-Car Brake Lathe PART NUMBER: PC1923MAZ APPLICABLE MODELS: All USAGE: To machine brake rotors on the vehicle.

NHTSA · メーカー通報10153307モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ブレーキNA

技術通報

Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit.

NHTSA · メーカー通報10148003モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ブレーキNA

技術通報

Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claimsare subject to denial or debit.

NHTSA · メーカー通報10142515モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · メーカー通報10142519モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度その他NA

技術通報

This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another. Use these points at your dealership to protect our mutual operations and to help ensure our customers' safety.

NHTSA · メーカー通報10134703モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ボディNA

技術通報

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy.

NHTSA · メーカー通報10118468モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ブレーキNA

技術通報

Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) on certain 2009-2011 Tribute vehicles. On certain 2009-2011 Tribute vehicles, contamination on the internal motor contacts of the throttle body may result in intermittent electrical connectivity.If this condition is present, the Malfunction Indicator Lamp or Wrench Lamp will illuminate, and the vehicle may enter fail-safe mode. In this mode, the engine power and vehicle speed is reduced, while maintaining full functionality of the power steering, power braking, lighting, and climate control systems. To improve vehicle performance should the above problem occur, dealers must reprogram the Powertrain Control Module (PCM). Please refer to Attachment II for repair details.This SSP will be in effect until July 31, 2015 regardless of mileage.

NHTSA · メーカー通報10117770モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ブレーキNA

技術通報

Mazda Motor Corporation is extending the warranty coverage for throttle body replacement on certain 2009-2011 Tribute vehicles produced from April 14, 2008 through May 30, 2011. The warranty for throttle body replacement will be extended to 10 years (120 months) from the original warranty start date or 150,000 miles, whichever comes first. If a vehicle has already exceeded the time or mileage limits, this coverage will last through January 31, 2015. Affected vehicles may develop contamination on the internal motor contacts of the throttle body, resulting in intermittent electrical connectivity. If this condition is present, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a fail-safe mode. In this mode, engine power and vehicle speed are reduced, while full functionality of the power steering, power braking, lighting, and climate control systems are maintained. If diagnosis identifies the throttle body as the causal component, dealers are authorized to replace the throttle body under this warranty extension program.This service must be performed at no charge to the vehicle owner.

NHTSA · メーカー通報10117771モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ボディNA

技術通報

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are resent and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no. 2 (c) socket overs have not been correctly installed or are missing due to improper prior repairs (i.E., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, hid module seal (d), or missing bumper brackets (e) is not covered by warranty policy.

NHTSA · メーカー通報10105886モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · メーカー通報10101062モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ボディNA

技術通報

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are present and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no. 2 (c) socket covers have not been correctly installed or are missing due to improper prior repairs (i.E., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, hid module seal (d), or missing bumper brackets (e) is not covered by warranty policy.

NHTSA · メーカー通報10098885モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

Bulletin noteservice bulletin 06-001/14, 2008-2011 tribute - dtc b2278 stored in the power steering control module, is no longer valid. Service bulletin 06-001/14 has been superseded by safety recall 7614e, 2008-2011 tribute - electric power-assisted steering (epas).

NHTSA · メーカー通報10098346モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度その他NA

技術通報

This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.

NHTSA · メーカー通報10098282モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度ブレーキNA

技術通報

Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. Due to your feedback and after evaluating a few on-car brake lathes, we are pleased to announce that we have added the pro cut on-car brake lathe to mnao authorized equipment program. The accu-turn is still an approved brake lathe but it is no longer available for purchase from our vendor. Important reminder rotors must be machined using a mazda approved on-car brake lathe or warranty claims are subject to denial or debit.

NHTSA · メーカー通報10098245モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度その他NA

技術通報

Some vehicles may exhibit an intermittent no crank, no start condition with no diagnostic trouble codes (dtc) or passive anti-theft system (pats) indicator flashing.

NHTSA · メーカー通報10097806モデルイヤー 2010–2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度トランスミッションNA

技術通報

Some vehicles equipped with an automatic transmission gain enhanced flat tow performance with an optional transmission cooling pump kit for recreational towing. The kit is available from the parts department and will help prevent transmission overheating.

NHTSA · メーカー通報10097804モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度トランスミッションNA

技術通報

Some vehicles may exhibit an occasional fluid leak coming from the rear differential vent cap in temperatures below 32 degrees fahrenheit (0 degrees celsius) under certain conditions.

NHTSA · メーカー通報10097801モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · メーカー通報10097722モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
トリビュート II · 2007–2011
技術通報中程度サスペンションNA

技術通報

Some customers may complain that the steering wheel is off center more than 3 even when driving straight on a flat road.

NHTSA · メーカー通報10097377モデルイヤー 2011原文(英語)で表示中 · 翻訳待ち詳細を見る →
古いもの →

出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。