Electrical system: problems reported by owners
30 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2004–2010), typically at around 106,000 miles. Reported consequences: 1 crash, 5 fires.
🔔 無料アカウントを作成して Mitsubishi エンデバー (すべての世代) のメール通知を受け取る
Mitsubishi エンデバー のすべての世代をまとめて:不具合、リコール、サービス情報、ディスカッション。世代を選ぶと絞り込めます。
30 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2004–2010), typically at around 106,000 miles. Reported consequences: 1 crash, 5 fires.
28 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 2004–2007), typically at around 63,000 miles. Most often named: cooling system (32%), cooling system:radiator assembly (18%). Reported consequences: 1 crash, 1 fire, 2 injuries.
28 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 2004–2008), typically at around 64,000 miles. Most often named: automatic transmission (32%). Reported consequences: 6 crashes.
24 owners in the United States reported problems with the airbags of this car to NHTSA (model years 2004–2011), typically at around 88,000 miles. Most often named: frontal (17%). Reported consequences: 18 crashes, 18 injuries.
22 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2004–2011), typically at around 80,000 miles. Reported consequences: 4 crashes.
**問題:** 一部の車両では、適合ラベルのフランス語表記が不足している場合があります。ラベルに記載されている「TIRES」「RIMS」「WITH」「FR」「RR」の語句と略語が英語のみで表示されており、本来は「TIRES/PNEUS」「RIMS/JANTES」「WITH/AVEC」「FR/AVT」「RR/ARR」と表示されるべきところが不足しています。カナダの規則では、この情報を英語とフランス語の両方でラベルに記載することが義務付けられています。 **安全上のリスク:** これらの小さな誤りは、車両の安全性には影響しません。 **是正措置:** これはリコールではありません。三菱自動車は、すべての新車について適合ラベルを修正しました。
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filler pipe of vehicles equipped with the first-generation version. Vehicles assembled with the second-generation filler pipe will be inspected and, if severe corrosion on the fuel filler pipe is observed, the pipe will be replaced with a third-generation version. For vehicles where corrosion of the fuel filler pipe is not observed, an anti-corrosion wax-like material will be applied to the filler pipe, and the inner wheel well shield will be replaced with an updated part that provides improved protection against mud intrusion and accumulation. ** Note: This recall supersedes recall 2010050.**
On certain vehicles, the software programming in the Heating, Ventilation, Air Conditioning (HVAC) controller may allow a combination of numerous data inputs to temporarily overload the calculation capacity of the controller, resulting in incorrect signals to be transmitted to the heater case mode door. This may cause the mode door to move to unselected positions during heater operation until the controller recovers and returns to proper operation. Over time, this excessive movement may damage the mode door shaft. These conditions could affect defroster performance, resulting in delayed clearing of the windshield, which could compromise safe vehicle operation and increase the risk of a crash. Correction: Dealers will replace the HVAC controller assembly, inspect the mode-door shaft for possible damage, and repair the mode-door shaft if necessary.
This Technical Service Bulletin was sent to dealers providing general Pre-Delivery Inspection (PDI) procedures, both technical and detail, for 2023 model year Mitsubishi vehicles (except Outlander PHEV).
この技術サービス広報(TSB)は、輸送用フィルムを剥がした後に、フィルムの不適切な貼付けが原因で、ボディパネルにシミや白濁した斑点が見られる場合があることをディーラーに通知するものです。本TSBでは、そのシミを除去するための修理手順についてディーラーに指示しています。
This Technical Information Notice was sent to dealers informing that MMNA has recently received information from Mitsubishi Motors Corporation (MMC) about the effects of the Waterborne (WB) paint process on Mitsubishi vehicles.
不具合とディスカッションは世代ごとに整理されています。投稿するには上で世代を選んでください。
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。