技術通報
「SUBARU OF AMERICA, INC.」は、特定の日本の Subaru 車両において、乾燥剤(デシカント)を封入していない、タカタ製の助手席側フロントエアバッグ(推進薬として相安定化硝酸アンモニウムを使用)に、自動車の安全性に関わる欠陥が存在すると判断しました(該当する特定車両のみ)。TKA-18R、TKB-18R、TKC-18R
🔔 無料アカウントを作成して Subaru レガシィアウトバック (すべての世代) のメール通知を受け取る
技術サービス通報(TSB)は、既知の不具合についてメーカーが販売店に送る修理指示です。安全リコールではありませんが、不具合の裏付けになることがよくあります。
「SUBARU OF AMERICA, INC.」は、特定の日本の Subaru 車両において、乾燥剤(デシカント)を封入していない、タカタ製の助手席側フロントエアバッグ(推進薬として相安定化硝酸アンモニウムを使用)に、自動車の安全性に関わる欠陥が存在すると判断しました(該当する特定車両のみ)。TKA-18R、TKB-18R、TKC-18R
This document discusses some of the conditions that may trigger an Automatic Collision Notification (ACN) (Gen1) or Advanced Automatic Collision Notification (AACN) (Gen2), without a collision, airbag deployment, or accident taking place.
Takata製助手席エアバッグ・インフレーターの拡大リコール
The 2013 my outback has a rear seat back protector available as an accessory. This seat back protector is used along with a cargo tray to protect the back of the rear seats when cargo is loaded into the cargo area when the rear seats are folded down. When the rear seats are folded up, there is a natural tendency for the seat back protectors to slightly pull away for the rear seat back. This is a natural condition and does not indicate a problem with the installation of the rear seat back protector. If the seat back protector buckles outward from the rear seat back excessively, please make sure the seat back protector is installed properly. A seat back protector that is installed too low on the rear seat back will interfere with a bracket in between the cargo area floor and the rear seats. This interference causes the seat back protector to buckle when the seats are folded upright.
"note: The airbag systems used on previous and current wrx, sti and tribeca models are not equipped with edr functionality. This bulletin provides information regarding event data recorder (edr) functionality which has been incorporated into the airbag system. The function of the edr is best explained using the following statements found in the vehicle owners manual: This vehicle is equipped with an event data recorder (edr). The main purpose of an edr is to record, in certain crash or near crash-like situations such as an airbag deployment or hitting a road obstacle, data that will assist in the understanding how a vehicles systems performed. The edr is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less."
The 2013 MY Outback has a rear seat back protector available as an accessory. This seat back protector is used along with a cargo tray to protect the back of the rear seats when cargo is loaded into the cargo area when the rear seats are folded down. When the rear seats are folded up, there is a natural tendency for the seat back protectors to slightly pull away for the rear seat back. This is a natural condition and does not indicate a problem with the installation of the rear seat back protector. If the seat back protector buckles outward from the rear seat back excessively, please make sure the seat back protector is installed properly. A seat back protector that is installed too low on the rear seat back will interfere with a bracket in between the cargo area floor and the rear seats. This interference causes the seat back protector to buckle when the seats are folded upright.
This Bulletin provides parts ordering and service guidance when replacing passenger seat assemblies and other passenger seat components.
This bulletin announces a change in the seat belt warning buzzer intervals in the inspection procedure found in the Service Manual. (This is an revised version of the original bulletin.)
This bulletin announces a change in the seat belt warning buzzer intervals in the inspection procedure found in the Service Manual.
This bulletin announces a design change made to the front seat backrest frame assemblies in response to a limited number of customer reports of a squeaking sound heard when leaning back in the front seats.
This bulletin announces reprogramming file availability to optimize the Body Integrated Unit (BIU) and address the following customer concerns: ? If a customer exits the vehicle with the ignition OFF, all the doors closed and leaves the hazard warning switch ON, after about 75 seconds, the access key (models with push-button start) or the RKE fob buttons (models with key start) will not lock or unlock the doors. ? The power driver seat position control buttons are inoperative when opening the driver?s door after the push-button ignition switch is OFF. ? The power rear gate (PRG) is inoperative when using the dashboard control buttons or the access key button when the push-button ignition switch is OFF and all doors are closed.
This bulletin announces reprogramming file availability to optimize the Body Integrated Unit (BIU) and address the following customer concerns: ? If a customer exits the vehicle with the ignition OFF, all the doors closed and leaves the hazard warning switch ON, after about 75 seconds, the access key (models with push-button start) or the RKE fob buttons (models with key start) will not lock or unlock the doors. ? The power driver seat position control buttons are inoperative when opening the driver?s door after the push-button ignition switch is OFF. ? The power rear gate (PRG) is inoperative when using the dashboard control buttons or the access key button when the push-button ignition switch is OFF and all doors are closed.
This bulletin announces reprogramming file availability to optimize the Body Integrated Unit (BIU) and address the following customer concerns: ? If a customer exits the vehicle with the ignition OFF, all the doors closed and leaves the hazard warning switch ON, after about 75 seconds, the access key (models with push-button start) or the RKE fob buttons (models with key start) will not lock or unlock the doors. ? The power driver seat position control buttons are inoperative when opening the driver?s door after the push-button ignition switch is OFF. ? The power rear gate (PRG) is inoperative when using the dashboard control buttons or the access key button when the push-button ignition switch is OFF and all doors are closed.
Whistling sound from rear seat console air vents - this bulletin provides a service procedure to address customer concerns of a whistling sound coming from the rear seat air distribution vents located at the rear of the center console.
This bulletin announces a design change to the rear seat backrest striker assembly. Prior to this change, if excessive force were to be applied to the reclining lever, the release cable could have become dislodged from the striker mechanism.
This bulletin provides a service procedure to address customer concerns of a whistling sound coming from the rear seat air distribution vents located at the rear of the center console. The bulletin was revised to provide counter measure information.
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The purpose of revising this bulletin was to correct the tribeca rear seat dvd unit part numbers.
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The purpose of revising this bulletin was to correct the tribeca rear seat dvd unit part numbers.
Whistling Sound from Rear Seat Console Air Vents
Poor Fit of Seat Back Protector
Poor Fit of Seat Back Protector
Film Residue Removal from Underside of Front Seat Cushion Covers
Ods (occupant detection system) front passenger seatbelt warning chime. *tt
Seatbelt reminder system disablement. Subaru techtips. *tt
Subject regarding inspection procedure for possible loose bolts on the right front seatbelt retractor case cover. *tt
出典:NHTSA(米国、パブリックドメイン)、カナダ運輸省(Open Government Licence – Canada)、DVSA(英国、Open Government Licence v3.0)、RappelConso および EU Safety Gate(フランス、Licence Ouverte 2.0)、国土交通省(日本、公共データ利用規約1.0)、韓国国土交通部(car.go.kr)。