Leitura livre · conta gratuita para contribuirSucessor do Anticars (2000)

LexusLexus LS III

2000–2006 · 9 defeitos documentados · 2 mercados
Ano do modelo
RecallCríticoMotorJP

燃料ホース/パイプ

原動機の燃料配管(デリバリパイプ)において、燃圧センサ締結面の平滑度が不適切なため、燃圧センサを規定トルクで締め付けても締結力が不足しているものがある。そのため、燃圧センサ締結部がゆるみ、燃料が漏れるおそれがある。

MLIT · Japão15 de out. de 20141134481Anos-modelo 2006Exibido no japonês original · tradução pendenteVer detalhes →
RecallCríticoInteriorNA

Air bags

On certain vehicles, due to improper assembly of the air bag inflator, which is used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. In this condition, the expansion force of the gas may be insufficient to properly inflate the air bag when the srs system is activated during a crash.

NHTSA · Estados Unidos3 de abr. de 200606V096000Anos-modelo 2004–2006Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorKR

엔진 본체 기계적 구성장치

엔진에 장착된 밸브스프링을 제조하는 과정에서 이물질이 혼합되어 스프링의 강도가 약화되어 균열과 파손이 될 수 있으며 심할 경우 시동이 꺼질 수 있는 결함

MOLIT · Coreia do Sul26 de jul. de 2010698Anos-modelo 2006Exibido no coreano original · tradução pendenteVer detalhes →
RecallModeradoMotorJP

エンジン本体

原動機の動弁機構部において、バルブスプリングの材料中に微小異物があるとスプリングの強度が低下して折損することがある。そのため、異音が発生してエンジン不調となり、最悪の場合、走行中にエンジンが停止するおそれがある。

MLIT · Japão5 de jul. de 20101125700Anos-modelo 2005–2006Exibido no japonês original · tradução pendenteVer detalhes →
RecallModeradoInteriorKR

기타장치

렉서스LS430 03.8.27~05.8.23 (2대) 렉서스GS300 05.11.25 (1대) 렉서스GS430 05.8.22 (1대) SRS에어백 팽창물질이 충분히 삽입되지 않아 총돌시 에어백이 완전히 팽창되지 않을 수 있음

MOLIT · Coreia do Sul11 de abr. de 2006611Anos-modelo 2005–2006Exibido no coreano original · tradução pendenteVer detalhes →
RecallModeradoMotorUK

Engine may stall

The impeller of the fuel pump sited in the fuel tank may deform. This condition could increase the rotational resistance of the impeller and in the worse case the fuel pump may lock which may in turn result in the engine stalling.

DVSA · Reino Unido25 de abr. de 2005R/2005/017Anos-modelo 2003–2004Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoFreiosUK

Possible failure of parking brake

An inner part of the transmission may receive a greater force than originally anticipated should the driver operate the accelerator pedal quickly. This may result in a small piece of metal becoming dislodged and in the worst case it may become lodged in the parking lock mechanism. Thus in the resulting in the parking brake failing to operated when P is selected on the transmission.

DVSA · Reino Unido15 de dez. de 2004R/2004/107Anos-modelo 2003–2004Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoCâmbioNA

Powertrain

On certain vehicles, a tab on the collar for the planetary gear assembly, an inner part of the automatic transmission, can receive greater force than what it is designed for when the accelerator pedal is operated quickly. This could cause a small piece of metal to be torn from the collar. In the worst case, this small piece of metal may get caught in the parking lock mechanism, causing the parking lock system to be inoperative when the transmission shift lever is placed in the "P" (PARK) position. Correction: Dealers will replace the automatic transmission.

Transport Canada7 de jul. de 20042004215Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoCâmbioNA

Power train:Automatic transmission

On certain vehicles when the accelerator is operated quickly, a small piece of metal may separate from a retaining collar located in the inner part of the automatic transmission. This small piece of metal may become caught in the parking lock mechanism.

NHTSA · Estados Unidos1 de jul. de 200404V317000Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Fuel system, gasoline:Delivery:Fuel pump

On certain passenger vehicles, the impeller inside the fuel pump may have been improperly molded due to a manufacturing error. Alcohol in some fuels may deform the impeller and cause it to come into contact with the pump housing.

NHTSA · Estados Unidos25 de jun. de 200404V295000Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →
RecallModeradoMotorNA

Fuel System

On certain vehicles, the fuel pump impeller may be deformed by alcohol included in fuel, causing the impeller to contact the fuel pump body. This condition could increase the rotation resistance of the impeller and, in the worst case, the fuel pump may lock, which may result in the engine stalling. Correction: Dealers will replace the fuel pump.

Transport Canada17 de jun. de 20042004205Anos-modelo 2004Exibido no inglês original · tradução pendenteVer detalhes →

Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).