免费阅读 · 免费账户即可贡献Anticars(2000)的继任者

BMW M3

1986– · 6 各代车型 · 已记录15项缺陷 · 2个市场
各代车型

技术服务通报(TSB)是制造商就已知问题发给经销商的维修说明。它们不是安全召回,但常常能证实某个缺陷。

车型年份
市场全部NA
F80 M3 · 2014–2018
通报严重悬架NA

通报

0Replacement of Steering Gear Due to Accident Damage. INFORMATION The steering gear does NOT have to be replaced if: ? There is no visible damage to front axle parts such as spring struts, hubs or spindles, control arms or wishbones, thrust or tension rods or stabilizers performing a locating function, steering drop arms or Pitman arms, track rods or drag links, tie rods, front axle subframe, steering column, and attachment points for suspension components to body. ? There is no binding or increase in turning effort when operating the steering gear from lock to lock with engine off. ? The impact has not caused the wheel alignment to become not adjustable within specified tolerances using normal adjustment procedures. The steering gear MUST be replaced if: ? There is visible damage to the steering gear, including blackening or discoloration of the housing from fire damage. ? Electric steering gear (EPS) version: Examine the control unit with all plug connections for damage and hairline cracks. ? There is any permanent deformation or cracks on: ? Wheel rims in the event of a negative result from the wheel/axle alignment check ? Spring struts, steering stubs, wheel carriers ? Wishbones ? Struts, trailing links or the anti-roll bar with this function ? Body side screwing/attachment points for wheel guide control components ? Front axle support ? Pitman arms https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? Tie rods ? Steering box fixtures ? Steering column The steering column MUST be replaced if visibly damaged, deformed or broken. If a recommended replacement with the criteria described above is refused by the customer or insurance company, this should be noted in the repair order and signed by the refusing party.

NHTSA · 制造商通报10147112以原文(英语)显示 · 翻译待完成查看详情 →
E90/92/93 M3 · 2007–2013
通报严重电气NA

通报

"? NO REGENERATION OF THE DIESEL PARTICULATE FILTER (DPF) This Service Information bulletin supersedes SI B18 03 10 dated November 2010. . The Service Engine Soon lamp is illuminated. The following fault codes may be stored in the DDE: N47T/N57T engine 245700 - Particle filter system: particulate filter highly loaded (Exhaust backpressure high) 245800 - particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) M57Y engine 480A Particle filter system - filter is heavily contaminated. (exhaust backpressure is too high) 481A Particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) CAUSE 1. Faults with the exhaust system that affect the monitoring of the DPF by the DDE 2. Unfavorable recent driving profile INFORMATIOM During normal driving, there is a continuous regeneration of the diesel particulate filter that takes place at exhaust-gas temperatures between 280 and 350C (slower oxidation process). The soot particles can only be burned off when the required exhaust-gas temperature has been reached. Under certain driving conditions (i.e., prolonged short trips or an exhaust system which never reaches soot burn-off temperatures), the DPF can become restricted. The DDE will initiate periodic regeneration automatically, at the latest after 600 miles. In vehicles making many short distance journeys, periodic regeneration takes place after only 250-500 miles. The Digital Diesel Electronics control unit evaluates the time for periodic regeneration from the following values: average distance driven average driving speed temperature in the diesel particulate filter values from the exhaust pressure sensor The DDE initiates the regeneration process by decreasing incoming air by the throttle valve, and one or two post injections are executed. This heats the exhaust-gas temperature to approx. 600 C . When the exhaust temp reaches this point: The soot is burned off with the residual oxygen. The

NHTSA · 制造商通报10146535车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →
M3 (E46) · 2000–2006
通报中等制动NA

通报

制动盘回流

NHTSA · 制造商通报11024229车型年份 2006自动翻译 · 原文:英语查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · 制造商通报11021817车型年份 2024以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等制动NA

通报

There may be an internal leakage in the brake fluid expansion tank (aka brake fluid reservoir). In the rare case of a leak, the filling level sensor might malfunction over a relatively long period of time.

NHTSA · 制造商通报11021109车型年份 2024以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等制动NA

通报

Brake groaning noises heard at the rear axle at slow speeds, i.e. close to standstill, stop and go driving;when parking or maneuvering.

NHTSA · 制造商通报11018518车型年份 2024以原文(英语)显示 · 翻译待完成查看详情 →
F80 M3 · 2014–2018
通报中等悬架NA

通报

在外部气温较低(低于华氏40度,即约4.4摄氏度)且行驶速度较慢(即停车、倒车入库等操作)、方向盘转角较大的情况下,前端可能会出现轻微的轴向错位。此时可能会感觉到顿挫感(抖动),或听到一声金属撞击声(咔嗒声),如附件视频 V36 01 21 第11秒所示。

NHTSA · 制造商通报10249018车型年份 2019自动翻译 · 原文:英语查看详情 →
E90/92/93 M3 · 2007–2013
通报中等制动NA

通报

车辆即将停止前制动时出现功能性噪声(尖叫声/鸣叫声)。原因:材料-

NHTSA · 制造商通报10244237车型年份 2011自动翻译 · 原文:英语查看详情 →
F80 M3 · 2014–2018
通报中等悬架NA

通报

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.

NHTSA · 制造商通报10218384以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · 制造商通报10206690车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等其他NA

通报

The SIM card installed in the telematics control unit (ATM2) connects to different mobile providers' networks. However, due to a missing parameter, this does not work and can cause disruption in BMW ConnectedDrive services in areas with insufficient network coverage.

NHTSA · 制造商通报10206692车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · 制造商通报10204661车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等制动NA

通报

When starting the vehicle vehicle at standstill, various yellow Check Control Messages CCMs appear. ID code 00042: Brake system. Additional notes: Avoid abrupt braking as far as possible. Drive at a moderate speed. Have it checked by your nearest Service Center. ID code 2046: Braking force assistance. Additional notes: Braking force assistance failure. Higher pedal force required for vehicle deceleration. Drive at a moderate speed. Have it checked by your nearest Service Center.

NHTSA · 制造商通报10204625车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等制动NA

通报

Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.

NHTSA · 制造商通报10201141车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · 制造商通报10200484车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
E90/92/93 M3 · 2007–2013
通报中等制动NA

通报

Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.

NHTSA · 制造商通报10194296车型年份 2011以原文(英语)显示 · 翻译待完成查看详情 →
E90/92/93 M3 · 2007–2013
通报中等电气NA

通报

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · 制造商通报10193494车型年份 2013以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · 制造商通报10186895车型年份 2021以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

LANE DEPARTURE WARNING - STEERING INTERVENTION TOO STRONG: The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time. Software error in the KAFAS (camera-based driver assistance system) control unit.

NHTSA · 制造商通报10179823车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等电气NA

通报

COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery.

NHTSA · 制造商通报10179824车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等悬架NA

通报

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected. Software error in the BDC (Body Domain Controller) module.

NHTSA · 制造商通报10179825车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等制动NA

通报

TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.

NHTSA · 制造商通报10178996车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等车身NA

通报

SERVICE ACTION - CHECK SUNROOF SEALING: The sunroof frame may not have been properly sealed, causing a water leak into the vehicle. Improper sealing during production.

NHTSA · 制造商通报10179002车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等制动NA

通报

PREMATURE WEAR OF THE REAR AXLE BRAKE PADS WITH STANDARD BRAKES: The CBS data and Check Control (CC) message shows the rear axle brake pads are worn, and the vehicle has less than 15,500 miles. Increased residual braking forces in the rear axle brake calipers caused by production-related deviations on the surface of the piston ring seal.

NHTSA · 制造商通报10177623车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
G80 M3 · 2020–
通报中等变速箱NA

通报

JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications.

NHTSA · 制造商通报10176367车型年份 2020以原文(英语)显示 · 翻译待完成查看详情 →
更早 →

来源:NHTSA(美国,公有领域)、加拿大交通部(加拿大开放政府许可)、DVSA(英国,开放政府许可 v3.0)、RappelConso 与欧盟 Safety Gate(法国,开放许可 2.0)、日本国土交通省(公共数据许可1.0)、韩国国土交通部(car.go.kr)。