Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

BMW 3er

1990–2000 · 16 dokumentierte Mängel · 6 Märkte
Modelljahr
RückrufKritischMotorNA

Fuel System

On certain 318I, 318IC, 318IS, 325IC, 325IS, 325IX, 525I, 535I, 735I and 735IL vehicles, the fuel feed hose could harden and "set" over time due to engine compartment temperatures. If this "setting" occurs, it is possible that seepage between the hose and fitting could result because the clamp cannot provide sufficient sealing force to compensate for the hardening of the hose. Fuel seepage, in the presence of an ignition source, could result in an engine compartment fire. Correction: fuel feed hoses and associated clamps will be replaced with ones of a new design.

Transport Canada30. Mai 19941994096Modelljahre 1990–1993Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischMotorNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.

NHTSA · USA11. Apr. 199494V066000Modelljahre 1990–1993Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufKritischMotorNA

Visibility:Defroster/defogger/hvac system:Heater core

The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.

NHTSA · USA1. Feb. 199393V015000Modelljahre 1990–1993Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Engine and engine cooling:Cooling system

Vehicle description: Passenger vehicles. A malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, can result in significantly increased coolant temperature and system pressure. If the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.

NHTSA · USA4. Aug. 199898V178000Modelljahre 1992–1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Motor

Bei bestimmten 318IC, 318IS, 318TI, 325I, 325IC, 325IS, 525I, 525IT, 530I, 530IT, 540I, 740I, 740IL, 840CI und M3 sind Tempomat und Drosselkabel am selben Drosselklappenventilhebel am Drosselgehäuse befestigt. Es ist möglich, dass die Kunststoffbuchse eines der Kabels bricht und das äußere Kabelgehäuse sich von der Buchse löst. Ein Gaspedal ohne Tempomat kann dazu führen, dass das äußere Rohr am Rand der gebrochenen Buchse hängen bleibt und das Drosselklappen teilweise offen bleibt. Falls dies passiert, könnte das Auto nicht wie erwartet abbremsen und ein Aufprall könnte einschlagen. Korrektur: Am äußeren Rohr jedes Kabels wird ein Federclip angebracht, um ein Lösen von der Buchse zu verhindern.

Transport Canada9. Okt. 19971997173Modelljahre 1992–1996Automatisch übersetzt · Original: EnglischDetails ansehen →
RückrufMittelMotorNA

Vehicle speed control

The cruise control and throttle cables are attached to the same throttle valve actuating lever at the throttle housing. It is possible that the plastic bushing on either cable could break due to environmental influences coupled with vibration. If the bushing breaks, the outer cable housing can separate from the bushing. In this case, during application of the throttle pedal without cruise control being engaged, the outer tube could catch on the edge of the broken bushing.

NHTSA · USA19. Aug. 199797V131000Modelljahre 1992–1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Engine

On certain 318I and 318IS vehicles, under certain conditions, with low ambient temperatures (-10 degrees and colder) and a warmed-up engine, water vapour in the warm air from the crankcase might condense and freeze in the throttle body. This could prevent the throttle plate from closing as the driver releases the gas pedal and might result in loss of vehicle control. Correction: Throttle body heater will be replaced with a modified heater.

Transport Canada12. Juli 19941994115Modelljahre 1992–1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Fuel system, gasoline:Fuel injection system

The adhesive material of the two piece throttle body heater migrates into the circulation chamber causing build up of impurities and restriction of flow within the chamber. This condition and water vapors from the crank that freezes at low ambient air temperatures prevents the throttle plate from closing as the driver releases the gas pedal, causing loss of throttle control.

NHTSA · USA17. Feb. 199494V037000Modelljahre 1992–1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Heater And Defroster

On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.

Transport Canada19. Juli 19931993100Modelljahre 1990–1993Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Vehicle speed control

The crankcase ventilation system, vented into the intake tract of the engine at the bellows boot ahead of the throttle housing, allows warm water vapor from the crankcase vent to condense and freeze in the colder bellows boot when the ambient air temperature is 15 degrees fahrenheit or less. The build up of ice can dislodge and move into the throttle housing, preventing the throttle plate from fully closing when the driver releases the gas pedal.

NHTSA · USA17. Dez. 199191V219000Modelljahre 1991–1992Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
RückrufMittelMotorNA

Engine

On certain 318I, 318IC and 318IS vehicles, at temperatures below -10 degrees centigrade with the engine partially or completely warmed up, condensation from the crankcase ventilation system may freeze at the throttle housing and prevent the throttle plate from fully closing when the accelerator pedal is released. This could result in a slow rate of deceloeration from speed or increased idle speed both of which may adversely affect vehicle control. Correction: Throttle house will be replaced with a version containing a modified heating system and the crankcase vent will be rerouted.

Transport Canada4. Dez. 19911991163Modelljahre 1991–1992Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).