Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Flash: Aktualisierung des Getriebesteuergeräts (TCM)
Kunden können Beanstandungen zu einem oder mehreren der folgenden Punkte äußern:
SYMPTOM: Ruckeln oder Schlupfgefühl beim Hochschalten (1. bis 5. Gang). Ruckeln oder Schlupfgefühl bei Kickdown-Vorgängen unter Last. Geruch nach Getriebeöl (verbrannter Geruch).
Bei dieser Technischen Information wird das Getriebesteuergerät (TCM) mit der neuesten verfügbaren Software neu programmiert.
Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: **Harsh or slipping feeling during upshifts (1st - 5th). Harsh or slipping feeling during kickdown events under throttle. Transmission fluid odor (burnt smell).** During a 2 - 3 transmission upshift, the engine is hitting rev limit. Hesitation feel during a pedal tip in, while engine is warming up below 1 C (30 F) ambient temp. This bulletin involves reprogramming the TCM with the latest available software.
Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: Harsh or slipping feeling during upshifts (1st - 5th). Harsh or slipping feeling during kickdown events under throttle. Transmission fluid odor (burnt smell). This bulletin involves reprogramming the TCM with the latest available software.
Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: Harsh or slipping feeling during upshifts (1st - 5th). Harsh or slipping feeling during kickdown events under throttle. Transmission fluid odor (burnt smell).
Flash: Aktualisierungen des Antriebsstrang-Steuergeräts (ECM/PCM)
Kunden müssen eine Leuchtanzeige der Motorkontrollleuchte (MIL) erleben, und das Fahrzeug muss einen oder mehrere der folgenden Diagnosefehlercodes (DTCs) anzeigen/setzen:
**P0148-00 - Fehler bei der Kraftstoffförderung. P0850-00 - Leistung des Park-/Neutralschalters. P1191-00 - Plausibilität/Leistung des Ansauglufttemperatursensors. P032F - Verbrennungsmotor erzeugt unzureichendes Drehmoment. P208D-00 - Steuerkreis der Reduktionsmittelpumpe "A" hoch. P204A-00 - Stromkreis des Reduktionsmitteldrucksensors. P20E9-00 - Reduktionsmitteldruck zu hoch. P208B-00 - Leistung der Reduktionsmittelpumpe 1 (Steuerung). P24B0-00 - Stromkreis des Partikelmassensensors niedrig. P24B1-00 - Stromkreis des Partikelmassensensors hoch. P2281-00 - Luftleck zwischen MAF und Drosselklappengehäuse.**
P0088-00 - Kraftstoffverteilerdruck zu hoch - Bank 1. P20CF-00 - Abgasnachbehandlungs-Kraftstoffinjektor "A" hängt offen. P20DB-00 - Abgasnachbehandlungs-Kraftstoffversorgungsregelung hängt offen. U0109-00 - Kommunikation mit dem Kraftstoffpumpen-Steuergerät verloren. P1451-00 - Leistung des Dieselpartikelfilter-Systems. P2463-00 - Dieselpartikelfilter-Verstopfung – Rußansammlung Bank 1. P2459-00 - Dieselpartikelfilter-Regeneration zu häufig. P0087-00 - Kraftstoffverteilerdruck zu niedrig. P2540-00 - Bereich/Leistung des Sensorkreises der Niederdruck-Kraftstoffanlage. P2543-00 - Intermittierend des Sensorkreises der Niederdruck-Kraftstoffanlage. P214D-00 - SCR-NOx-Katalysator-Austrittstemperatur während der Partikelfilter-Regeneration zu hoch. P242B-00 - Leistung des Abgastemperatursensor-Stromkreises - Bank 1 Sensor 3. P24DA-00 - Partikelmassensensor Abgasprobenfehler Bank 1. P20EE-00 - SCR-NOx-Katalysatorwirkungsgrad unter Schwellenwert - Bank 1 Katalysator 1. P226C-00 - Turbolader-Ladedruckregelung "A" langsame Reaktion. P229F-00 - Bereich/Leistung des NOx-Sensorkreises - Bank 1. P0100-00 - Stromkreis des Luftmassen- bzw. Luftvolumenmessers "A". P203F-00 - Reduktionsmittelstand zu niedrig.
Diese Mitteilung umfasst die Prüfung und gegebenenfalls das Neuprogrammieren des Motorsteuergeräts (ECM/PCM) mit der neuesten verfügbaren Software.
Tire Pressure Monitoring System (TPMS) Red XX Displayed and/or Warning Indicator Illuminated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): C1501-31 - Tire Pressure Sensor 1-No Signal. C1502-31 - Tire Pressure Sensor 2-No Signal. C1503-31 - Tire Pressure Sensor 3-No Signal. C1504-31 - Tire Pressure Sensor 4-No Signal. C1505-31 - Tire Pressure Sensor 5-No Signal. C1506-31 - Tire Pressure Sensor 6-No Signal. Customers may also comment on the following: TPMS displaying red "XX" for one or more sensors and/or the tire pressure warning light is on in the Instrument Panel Cluster (IPC). This bulletin involves scanning the TPMS sensors and replacing TPM sensor(s) found in the provided table.
Tire Pressure Monitoring System (TPMS) Red XX Displayed and/or Warning Indicator Illuminated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): C1501-31 - Tire Pressure Sensor 1-No Signal. C1502-31 - Tire Pressure Sensor 2-No Signal. C1503-31 - Tire Pressure Sensor 3-No Signal. C1504-31 - Tire Pressure Sensor 4-No Signal. C1505-31 - Tire Pressure Sensor 5-No Signal. C1506-31 - Tire Pressure Sensor 6-No Signal. Customers may also comment on the following: TPMS displaying red "XX" for one or more sensors and/or the tire pressure warning light is on in the Instrument Panel Cluster (IPC). This bulletin involves scanning the TPMS sensors and replacing TPM sensor(s) found in the provided table.
Flash: Electric Power Steering (EPS) Module Updates Customers may experience the following: SYMPTOM: Battery drain due to the EPS system staying active after ignition off. This bulletin involves inspecting and possibly reprogramming the EPS module with the latest available software.
Flash: Electric Power Steering (EPS) Module Updates Customers may experience the following: SYMPTOM: Battery drain due to the EPS system staying active after ignition off. This bulletin involves inspecting and possibly reprogramming the EPS module with the latest available software.
Wrong Instrument Panel Cluster (IPC) Configuration Customers may comment on one or more the following: Oil pressure gauge and battery life gauges are blank or missing from the IPC Fig. 1. The Trailer Brake radial slider movement will not move past one bar and is inaccurate Fig. 2. NOTE: The Trailer Brake percentage does display correctly. This bulletin supersedes Technical Service Bulletin (TSB) 08-328-26, date of issue September 03, 2026,which should be removed from your files. All revisions are highlighted with **asterisks** and includean updated LOP. This Technical Service Bulletin (TSB) has also been released as a Rapid Service Update (RSU) 26-164, date of issue September 03, 2026. All applicable RSU VINs have been loaded. To verify this RSU service action is applicable to the vehicle, use VIP or perform a VIN search in DealerCONNECT/ServiceLibrary. All repairs are reimbursable within the provisions of warranty.
Wrong Instrument Panel Cluster (IPC) Configuration Customers may comment on one or more the following: SYMPTOM: Oil pressure gauge and battery life gauges are blank or missing from the IPC Fig. 1. The Trailer Brake radial slider movement will not move past one bar and is inaccurate Fig. 2. NOTE: The Trailer Brake percentage does display correctly. This bulletin involves performing a reconfigure and Proxi alignment on the IPC.
Brake Fluid Leak At The Brake System Control Module 2 (BSCM2) The customer may comment the following: SYMPTOM: Drops of brake fluid are on the ground. This bulletin involves tightening two BSCM2 brake line fittings.
Flash: Brake System Control Module (BSCM) Updates **Customers may experience one or more of the following: SYMPTOM: Warning message "Selec-Speed Unavailable" appears in the Instrument Panel Cluster (IPC) when trying to enable the Selec-Speed Control (SSC) function. NOTE: There will be no Diagnostic Trouble Codes (DTCs) and no driveability concerns with this symptom.** Anti-Lock Brake System (ABS), Electronic Stability Control (ESC) and 'Decel ACC' lights on in the IPC. Technicians may also find the following: DTC C121A-00 - Steering Angle Sensor Not Initialized - Is stored with no Malfunction Indicator Lamp (MIL). This bulletin involves reprogramming the BSCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set SYMPTOM: one or more of the following Diagnostic Trouble Codes (DTCs): P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-fuel Ratio Imbalance. P032F - Combustion Engine Producing Insufficient Torque. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may experience one or more of the following: **Power Take Off (PTO) may cancel during engagement with high PTO loads.** Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). PTO not auto-resuming after hard-wired remote start (DD/DP Only). Driveline clunk or bump when coasting to a stop in cruise control mode. Engine idle undershoot or delayed response with power steering input. In addition, the following software enhancement(s) is available: Increase the duration that PTO related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only). This bulletin involves reprogramming the PCM with the latest available software.
Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set: P1A29-00 - Cell Supervisory Circuit A Failure. U3017-00 - Control Module Timer/Clock Performance. Customers may also comment on one or more of the following: Vehicle in limp-home mode. Start/Stop feature will be disabled. This bulletin involves reprogramming the BPCM with the latest available software.
Not applicable to vehicles built for US market. Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation SYMPTOM: the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set: **P1A29-00 - Cell Supervisory Circuit A Failure. U3017-00 - Control Module Timer/Clock Performance.** P0E55-00 - DC/DC Converter Current Sensor Circuit "A" Intermittent/erratic. Customers may also experience one or more of the following: **Vehicle in limp-home mode. Start/Stop feature will be disabled.** The 12-volt battery is not charging properly. The battery charge stays low or dies quickly, even after driving. The vehicle had to be towed due to battery not charging.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0088-00 - Fuel Rail Pressure Too High - Bank 1. P208B-00 - Reductant Pump 1 Control Performance. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P0506-00 - Idle Control System RPM - Lower Than Expected. P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. P040B-00 - EGR Temperature Sensor 1 Circuit Performance. U0109-00 - Lost Communication With Fuel Pump Control Module. P1451-00 - Diesel Particulate Filter System Performance. P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. P1191-00 - Inlet Air Temperature Sensor Rational/Performance. P242F-00 - Diesel Particulate Filter Restriction - Ash Accumulation. P229F-00 - NOX Sensor Circuit Range/Performance - Bank 1. P2281-00 - Air Leak Between MAF And Throttle Body. P0087-00 - Fuel Rail Pressure Too Low. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. P214D-00 - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. P24DA - Particulate Matter Sensor Exhaust Sample Error Bank 1. P20EE-00 - SCR NOx Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. P226C-00 - Turbocharger Boost Control "A" Slow Response. P2281-00 - Air Leak Between Maf And Throttle Body. P229F-00 - Nox Sensor Circuit Range/performance - Bank 1. P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. P203F-00 - Reductant Level Too Low. P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0088-00 - Fuel Rail Pressure Too High - Bank 1. P208B-00 - Reductant Pump 1 Control Performance. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P0506-00 - Idle Control System RPM - Lower Than Expected. P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. P040B-00 - EGR Temperature Sensor 1 Circuit Performance. U0109-00 - Lost Communication With Fuel Pump Control Module. P1451-00 - Diesel Particulate Filter System Performance. P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. P1191-00-Inlet Air Temperature Sensor Rational/Performance. P242F-00-Diesel Particulate Filter Restriction - Ash Accumulation. P229F-00 - NOX Sensor Circuit Range/Performance - Bank 1. P2281-00 - Air Leak Between MAF And Throttle Body. P0087-00 - Fuel Rail Pressure Too Low. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. P214D-00 - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. P24DA - Particulate Matter Sensor Exhaust Sample Error Bank 1. P20EE-00 - SCR NOx Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. P226C-00 - Turbocharger Boost Control "A" Slow Response. P2281-00 - Air Leak Between Maf And Throttle Body. P229F-00 - Nox Sensor Circuit Range/performance - Bank 1. P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. P203F-00 - Reductant Level Too Low. P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
R1L/R1H Trailer Brake Setting In Radio Cannot Be Changed Customers may experience the following: SYMPTOM: Trailer brake setting in radio cannot be changed.
SA Market Only - Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0088-00 - Fuel Rail Pressure Too High - Bank 1.** P0263-00 - Cylinder 1 Contribution/Balance. P0266-00 - Cylinder 2 Contribution/Balance. P0269-00 - Cylinder 3 Contribution/Balance. P0272-00 - Cylinder 4 Contribution/Balance. P0275-00 - Cylinder 5 Contribution/Balance. P0278-00 - Cylinder 6 Contribution/Balance. Customers may also comment one or more of the following: The engine runs rough and exhibits stumbling and shaking. Loss of power. NOTE: The perceived loss of power is due to an insufficient injector/torque response. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
Not applicable to vehicles built for US market. SA Market Only - Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P0088-00 - Fuel Rail Pressure Too High - Bank 1. Customers may also comment on the following: Vehicle enters into limp home mode / exhibits a loss of power This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P219A - Bank 1 Air-Fuel Ratio Imbalance Bank 1. P219B - Bank 2 Air-fuel Ratio Imbalance. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may also comment on one or more of the following: **Power Take-Off (PTO) may cancel during engagement with high PTO loads.** PTO not auto-resuming after hard-wired remote start (DD/DP Only). Engine speed surging, unstable, or oscillating while coasting at low vehicle speeds. Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). In addition, the following software enhancement(s) is available: Increase the duration that Power Takeoff related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only) **This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.**
Oil Pan Leak Customers may experience the following: SYMPTOM: 'Low Oil Level' message on in the Instrument Panel Cluster (IPC). Oil Leak. This bulletin involves replacing the engine oil pan.
Oil Pan Leak Customers may experience the following: SYMPTOM: 'Low Oil Level' message on in the Instrument Panel Cluster (IPC). Oil Leak. This bulletin involves replacing the engine oil pan.
Flash: Brake System Control Module (BSCM) Update Customers may comment on the following: Anti-Lock Brake System (ABS), Electronic Stability Control (ESC), 'Decel ACC' lights on in Instrument Panel Cluster (IPC). Technicians may find the following: Diagnostic Trouble Code (DTC) "C121A-00 - Steering Angle Sensor Not Initialized" is stored with no Malfunction Indicator Lamp (MIL) illuminated This bulletin involves reprogramming the BSCM with the latest available software.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).