Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Some of the vehicles listed in the Model statement above may exhibit an inoperative dark car mode. The vehicle may exhibit at least one of the following features remaining functional when dark car mode is enabled: * Illuminated odometer, compass, outside air temperature, audio/phone display. * Illuminated main message center display area. * Courtesy lighting * Welcome/farewell animation * Night lock indicator * Passenger airbag disable (PAD) indicator dims to minimum brightness * Locking flash/horn feedback This may be due to the software in the body control module (BCM) and the accessory protocol interface module (APIM).
Some 2022 Explorer/Aviator vehicles may exhibit an intermittent passenger seat massage function with no diagnostic trouble codes (DTCs). This may be due to the configuration of the seat control module G (SCMG) and seat control module H (SCMH) modules. To correct the condition, reprogram the SCMG and SCMH and run the SCMG and SCMH configuration application with the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14F548 and applicable labor times found in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2022 Explorer/Aviator vehicles may exhibit an intermittent passenger seat massage function with no diagnostic trouble codes (DTCs). This may be due to the software and configuration of the seat control module G (SCMG) and seat control module H (SCMH). To correct the condition, download and run the SCMG and SCMH software update application using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14F548 and applicable labor times found in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2022 Explorer/Aviator vehicles may exhibit an intermittent passenger seat massage function with no diagnostic trouble codes (DTCs). This may be due to the configuration of the seat control module G (SCMG) and seat control module H (SCMH) modules. To correct the condition, reprogram the SCMG and SCMH and run the SCMG and SCMH configuration application with the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 14F548 and applicable labor times found in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2022 Explorer/Aviator vehicles may exhibit an intermittent passenger seat massage function with no diagnostic trouble codes (DTCs). This may be due to the configuration of the seat control module G (SCMG) and seat control module H (SCMH) modules. Replacement of the SCMG and SCMH will not correct the condition. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition and a software update is expected at the end of March 2022. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
Some 2020 Explorer/Aviator vehicles built on or before 04-Sep-2019 equipped with memory seats may exhibit the driver front seat moving forward during easy entry/exit operation when the vehicle is turned off. This may be due to the software in the driver front seat module (DSM). To correct the condition, replace the DSM and reprogram the DSM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 14C708 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2021 Explorer Limited vehicles built on or before 10-Dec-2020 may exhibit an inoperative second row seat power fold function. This may be due to the configuration of the body control module c (BCMC) and the power fold seat module (SCMJ). To correct the condition, reconfigure the BCMC using the latest software level of the appropriate Ford diagnostic scan tool. Once the BCMC is reconfigured, perform the SCMJ reconfiguration routine using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 14F042 and applicable service labor times found in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Some 2021 Explorer Limited trim vehicles equipped with the 300A convenience package including 2nd row power-fold backrest and 3rd row manual folding seats may exhibit diagnostic trouble codes (DTCs) B154D:15 and/or B11CE:15 stored in the power fold seat module (SCMJ). If these DTCs are noticed during diagnosis of unrelated concerns, they should be ignored. No repairs should be attempted to address these DTCs.
Some 2020 Explorer vehicles may exhibit loose fitting side trim panels on the front row lower seat cushions and upper seat backs. This may cause the seat cover to appear to be cut improperly. The seat cover should not be replaced for this concern. Adjust the seat side trim panels for proper fit.
Some 2020 Explorer/Aviator vehicles built on or before 04-Sep-2019 equipped with memory seats may exhibit the driver front seat moving forward during easy entry/exit operation when the vehicle is turned off. This may be due to the software in the driver front seat module (DSM). To correct the condition, reprogram the DSM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 14C708 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
In all of the affected vehicles, there are shallow pressed valve seats in the cylinder heads. This may lead to a rough idle, engine misfires with a reduction in power/torque, and a check engine/wrench light illuminated.
In all of the affected vehicles, there are shallow pressed valve seats in the cylinder heads. This may lead to a rough idle, engine misfires with a reduction in power/torque and a check engine/wrench light illuminated.
Some 2017 Explorer base level vehicles equipped with a manual front passenger seat may exhibit a stuck condition in the full forward position. This may be caused by the seat being moved firmly from the rearward position to the forward position causing the seat track stop bracket to bend allowing the adjuster bar to become trapped under the bracket. The bracket is located on the inner side of the outboard track at the front. Remove the bracket to release the adjuster bar and slide the seat rearward. Bend the bracket back to the correct position and reattach. Refer to Workshop Manual Section 501-10A. Replacement of the seat track is not necessary to correct this condition. Continue to monitor oasis for updates.
Some 2016 explorer and mkx vehicles built on or before 3/11/2016 may exhibit a memory seat that does not return to the programmed position when pressing the memory seat switch or programmed intelligent access (ia) key; and/or easy entry/exit function that does not return to the previous seat position.
Some 2015-2016 edge and 2016 explorer vehicles built on or before 2/12/2016 equipped with climate controlled seats may exhibit a lack of cooling performace from the front seat backrests.
Some vehicles may exhibit repeat service for air bag lamp on with diagnostic trouble code b1994 (driver side air bag circuit resistance high) and / or b1998 (passenger side air bag circuit resistance high). *tt
Some vehicles may exhibit an passenger seat that does not latch securely after rleasing, sliding forward, and returning the seat to its normal position. *tt
Some vehicles equipped with 7 passenger seating may exhibit the 2nd row 40 percent seat back staying in the down position. This may be due to a rivet interference at the floorpan latches. *tt
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).