Subaru of America, Inc. (Subaru) is recalling certain model year 2010-2014 Legacy vehicles manufactured November 26, 2008, to June 7, 2013, and 2010-2014 Outback vehicles manufactured January 9, 2009 to June 7, 2013. Due to contamination, components within the windshield wiper motor bottom cover may interfere with each other. If an obstruction, such as a buildup of snow or ice prevents the wiper arms from being able to stop in the parked position, the wiper motor may overheat and the bottom cover may melt.
Subaru of America, Inc. (Subaru) ruft bestimmte Fahrzeuge der Modelle Legacy und Outback aus dem Modelljahr 2019 zurück. Punktschweißverbindungen am Kanal unterhalb der Windlaufverkleidung wurden möglicherweise nicht ordnungsgemäß ausgeführt, was die Karosseriefestigkeit des Fahrzeugs beeinträchtigen kann.
Subaru of America, Inc. (Subaru) is recalling certain 2018 Legacy, Outback, and BRZ vehicles. In the affected vehicles, a software issue may cause the audio display system to not initialize, resulting in the camera display remaining blank. If this occurs, the rearview image will not display while backing up the vehicle. As a result, the vehicles fail to comply with requirements of Federal Motor Vehicle Safety (FMVSS) number 111, "Rearview Mirrors."
와이퍼 모터 커버의 제작결함 또는 조립과정에서 이물질 유입으로 와이퍼모터 내 작동부에 간섭이 발생 될 수 있는 가능성에 따른 리콜 - 전면유리 와이퍼 블레이드 작동 범위내에 얼음 또는 쌓인 눈 등 기타 장애물로 인하여 와이퍼 스위치 OFF시에 와이퍼 블레이드가 정지위치에 도달하지 못하는 경우, 와이퍼 모터에 과열 가능성이 있음. 과열 발생 시 와이퍼가 작동하지 않으며, 이로써 전방 시야확보가 어려울 수 있는 결함
Subaru is recalling certain model year 2012 Outback and Legacy vehicles manufactured from April 6, 2011, through May 12, 2011. The moonroof glass may come loose or detach. The amount and position of the adhesive between the glass and retainer was inadequately applied.
NHTSA · USA5. März 201313V077000Modelljahre 2012Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Subaru is recalling certain model year 2011 outback and legacy vehicles manufactured from august 3, 2010, through july 1, 2011. The moonroof glass may come loose or detach. The amount and position of the adhesive between the glass and retainer was inadequately applied.
Vehicle description: Passenger vehicles. The throttle shaft ball bearing on the sensor side of the throttle body assembly was not installed in certain throttle bodies.
Subaru of America, Inc. (Subaru) is recalling certain 2022 Impreza and Outback vehicles. The incorrect paint clearcoat may have been applied, which can cause the windshield to be insufficiently bonded to the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).