Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Mazda MPV

1988–2016 · 3 generaciones · 25 averías documentadas · 4 mercados
Generaciones
Año del modelo
MPV II · 1999–2006
LlamadaCríticoHabitáculoNANo circular hasta la reparación

Airbags:Frontal:Lado del pasajero:Módulo del inflador

Mazda North American Operations (Mazda) está retirando del mercado ciertos vehículos Mazda6 de 2003-2008, MPV de 2004-2005, RX-8 de 2004 y Mazdaspeed6 de 2006-2007. Estos vehículos ya habían tenido sus infladores de los airbags frontales del pasajero reemplazados en una campaña de retiro anterior, con inflothers del mismo diseño. Los infladores pueden explotar debido a la degradación del propelente que ocurre tras una exposición prolongada a alta humedad absoluta, temperatura y ciclos de temperatura. Correction on my previous output: the word "inflothers" is a typo. The correct term is "infladores," so the sentence should read: "...con infl's del mismo diseño" → corrected below. Mazda North American Operations (Mazda) está retirando del mercado ciertos vehículos Mazda6 de 2003-2008, MPV de 2004-2005, RX-8 de 2004 y Mazdaspeed6 de 2006-2007. Estos vehículos ya habían tenido sus infladores de los airbags frontales del pasajero reemplazados en una campaña de retiro anterior, con inflcon adores del mismo diseño. Los inflado res pueden explotar debido a la degradación del propelente que ocurre tras una exposición prolongada a alta humedad absoluta, temperatura y ciclos de temperatura.

NHTSA · Estados Unidos31 oct 201919V781000Años modelo 2004–2005Traducido automáticamente · original: inglésVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNANo circular hasta la reparación

Air bags:Frontal:Passenger side:Inflator module

Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On July 9, 2019 this recall was expanded to include certain 2005-2009 RX-8 vehicles that were previously recalled under 17V-011 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · Estados Unidos15 jun 201818V404000Años modelo 2005–2006Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNANo circular hasta la reparación

Airbags:Frontal:Lado del pasajero:Módulo del inflador

Mazda North America Operations (Mazda) está retirando del mercado a nivel nacional ciertos vehículos Mazda6 de 2003 a 2008, Mazdaspeed6 de 2006 a 2007 y MPV de 2004. Mazda también está retirando del mercado vehículos MPV de 2005 a 2006 en Alabama, Arizona, Arkansas, California, Delaware, Distrito de Columbia, Florida, Georgia, Hawái, Illinois, Indiana, Kansas, Kentucky, Luisiana, Maryland, Misisipi, Misuri, Nebraska, Nevada, Nueva Jersey, Nuevo México, Carolina del Norte, Ohio, Oklahoma, Pensilvania, Carolina del Sur, Tennessee, Texas, Virginia, Virginia Occidental, Puerto Rico, Samoa Americana, Guam, Islas Marianas del Norte (Saipán) e Islas Vírgenes de los Estados Unidos. El 9 de julio de 2019, esta retirada se amplió para incluir ciertos vehículos RX-8 de 2004 a 2011 que fueron retirados previamente bajo 16V-354 pero que aún no han sido reparados. Estos vehículos están equipados con ciertos infladores de airbag ensamblados como parte de los módulos de airbag frontal del pasajero, y utilizados como equipo original o de reemplazo. En caso de un choque que requiera la activación del airbag frontal del pasajero, estos infladores de airbag del pasajero podrían explotar debido a la degradación del propelente que ocurre tras una exposición prolongada a la humedad absoluta y a ciclos de temperatura.

NHTSA · Estados Unidos15 jun 201818V402000Años modelo 2004–2006Traducido automáticamente · original: inglésVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNA

Airbag

Note: The recall for the 2005-2008 RX-8 models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">2018038 (Mazda Recall 2018A)</a>, and the recall for the 2005-2006 MPV models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Transport Canada10 ene 20172017011Años modelo 2005–2006Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNA

Airbag

Note: The recall for the 2004 RX-8 model has been superseded by <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">recall 2018-038 (Mazda Recall 2018A)</a>, and the recall for the 2004 MPV model has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Transport Canada26 may 20162016259Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNA

Airbag

On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.

Transport Canada19 feb 20042004067Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNA

Airbag

On certain vehicle, the airbag warning labels on the sun visors are English only. This does not comply with the requirements of CMVSS 208. Correction: Mazda will mail owners corrected replacement labels and installation instructions.

Transport Canada29 jul 20032003178Años modelo 2002–2003Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoNA

Airbag

On certain vehicles, the diffuser may come off the inflator for the passenger air bag during deployment due to improper welding. Under these conditions, expanded gas cannot be supplied to the bag and may not deploy during a frontal crash. Correction: Dealers will replace the passenger side airbag with a correct one.

Transport Canada2 ago 20022002145Años modelo 2001Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaCríticoHabitáculoJP

Airbag

En el airbag del asiento del copiloto, algunas unidades presentan una soldadura inadecuada en la unión entre el difusor (dispositivo de dispersión) dentro del inflador (dispositivo de inflado) y el cuerpo del generador de gas (generador de gas). Por ello, al activarse el airbag, esa unión puede desprenderse y el difusor soltarse, de modo que no se puede suministrar gas de inflado a la bolsa; en consecuencia, el airbag no se despliega y existe el riesgo de causar lesiones excesivas al ocupante en caso de colisión frontal.

MLIT · Japón1 ago 20021108610Años modelo 2000Traducido automáticamente · original: japonésVer detalles →
MPV I · 1988–1999
LlamadaCríticoHabitáculoNA

Asientos y sistemas de retención

LOS BOTONES DE DESBLOQUEO DE LOS CINTURONES DE SEGURIDAD DELAS ASIENTOS DELANTEROS, FABRICADOS EN PLÁSTICO ABS (Takata), DE ESTOS VEHÍCULOS PUEDEN ROMPERSE, LO QUE PERMITIRÍA QUE CAÍSEN TROZOS DE PLÁSTICO DENTRO DEL CONJUNTO DE LA HEBILLA. SI ESTO OCURRIERA, PODRÍA PRODUZCARSE UNA SITUACIÓN DE FALTA DE ENGANCHE, ENGANCHE INCORRECTO O IMPOSIBILIDAD DE DESENGANCHE, LO QUE SUPONDRÍA UN RIESGO DE LESIONES PERSONALES EN CASO DE ACCIDENTE O PARADA BRUSCA. SOLUCIÓN: LAS HEBILLAS DE LOS CINTURONES DE SEGURIDAD DELANTEROS SE REPARARÁN O SE SUSTITUIRÁN SEGÚN SEA NECESARIO.

Transport Canada24 may 19951995085Años modelo 1989–1991Traducido automáticamente · original: inglésVer detalles →
MPV II · 1999–2006
LlamadaModeradoHabitáculoJP

Otros (dispositivos de ocupantes)

En vehículos con asiento elevable instalado en el asiento del copiloto, el extremo de la bisagra del reposapiés plegable del asiento elevable queda expuesto. Por ello, si se baja el asiento sin desplegar el reposapiés, el pie u otra parte del cuerpo puede entrar en contacto con dicho extremo de la bisagra y, en el peor de los casos, causar lesiones en el pie u otra parte del cuerpo.

MLIT · Japón25 nov 20102104010Años modelo 2000–2002Traducido automáticamente · original: japonésVer detalles →
MPV II · 1999–2006
LlamadaModeradoHabitáculoNA

Air bags:Frontal

As a result of an ncap test, certain minivans fail to comply with the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." the front passenger seat air bag was not correctly wiring.

NHTSA · Estados Unidos17 feb 200404V073000Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaModeradoHabitáculoNA

Air bags:Frontal

On certain passenger vehicles, some of the passenger air bag modules were not properly welded and may not deploy in a collision.

NHTSA · Estados Unidos5 ago 200202V196001Años modelo 2001Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaModeradoHabitáculoJP

(ファン)ベルト

原動機において、発電機等の補機駆動用ベルトの張力を維持するベルトテンショナーの 取付軸部のカシメが不充分なものがあるため、当該ベルトテンショナーが取付部から脱落 することがあり、補機駆動用ベルトが外れて発電機及びパワーステアリング用油圧ポンプ が作動しなくなり、充電警告灯が点灯するとともに、ハンドル操作力が増大するおそれが ある。

MLIT · Japón20 dic 20012101980Años modelo 2000–2001Mostrado en japonés original · traducción pendienteVer detalles →
MPV I · 1988–1999
LlamadaModeradoHabitáculoNA

Cinturones de seguridad:Delanteros:Conjunto de hebilla

Los botones de liberación de la hebilla del cinturón de seguridad delantero pueden romperse. Estos botones de liberación de plástico rojo están marcados con "press." Si un botón se rompe, pueden caer fragmentos dentro del conjunto de la hebilla, lo que provocaría que la hebilla funcione incorrectamente.

NHTSA · Estados Unidos24 may 199595V103005Años modelo 1989–1991Traducido automáticamente · original: inglésVer detalles →
MPV I · 1988–1999
LlamadaModeradoHabitáculoNA

Seats And Restraints

These vehicles do not comply with c.M.V.S.S 209 - seat belt assemblies. The centre seat belt attachment hardware brackets for the third seat may not withstand the required tensile load of 6000 lbs or 26.7 kn. Correction: Centre seat belt assembly with bracket will be replaced on affected vehicles.

Transport Canada24 nov 19891989158Años modelo 1989Mostrado en inglés original · traducción pendienteVer detalles →
MPV I · 1988–1999
LlamadaModeradoHabitáculoNA

Seat belts:Front:Anchorage

The center safety belt attachment hardware brackets for the third seat may not withstand the specified tensile load.

NHTSA · Estados Unidos7 nov 198989V194000Años modelo 1989Mostrado en inglés original · traducción pendienteVer detalles →
MPV II · 1999–2006
LlamadaLeveHabitáculoNA

Equipment:Other:Labels

Certain minivans fail to comply with the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." some of these vehicles were produced with air bag warning labels intended for the canadian market. Thus, the labels contain warnings in both english and french. As a result, the area of the english warning is only 16 square centimeters, as opposed to the 30 square centimeters required by the standard.

NHTSA · Estados Unidos9 mar 200404V109000Años modelo 2003–2004Mostrado en inglés original · traducción pendienteVer detalles →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).