Steering: Steering wheel/handle bar
The zinc plating operation performed on the upper steering column shaft coupling bolt caused hydrogen embrittlement and breakage of the bolt.
The zinc plating operation performed on the upper steering column shaft coupling bolt caused hydrogen embrittlement and breakage of the bolt.
A cause d'un fragilisation par l'hydrogène, le boulon de l'accouplement de la colonne de direction peut briser, affaiblissant la capacité de serrage de l'accouplement sur la colonne de direction et entraînant une perte de maîtrise de la direction.
Water leaking under windshield cowl in area above heater blower motor resistor block results in corrosion of the resistor terminals.
Air bag inflator modules may not contain diffuser holes between the ignitor and propellant chambers.
The engine valve cover gasket may dislocate and allow an engine oil leak at the gasket.
The abs hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.
The anti-lock brake system high pressure hose may leak or detach at its crimped end fitting resulting in the discharge of hydraulic fluid.
Front outboard safety belt may become difficult to latch and or unlatch due to a webbing stiffener entering the buckle housing and dislodging the buckle latch guide.
Front disc brake caliper guide pin bolts may not have been adequately torqued and could loosen.
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).