Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.
Flash : Mises à jour du module de commande de transmission (TCM)
Les clients peuvent signaler un ou plusieurs des problèmes suivants :
SYMPTÔME : Sensation de secousse ou de patinage lors des passages de rapport (1er à 5e). Sensation de secousse ou de patinage lors des rétrogradations forcées (kickdown) sous accélération. Odeur de liquide de transmission (odeur de brûlé).
Ce bulletin implique la reprogrammation du TCM avec le dernier logiciel disponible.
NHTSA · bulletin constructeur11035059Années modèle 2022Traduit automatiquement · original : anglaisVoir le détail →
Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: **Harsh or slipping feeling during upshifts (1st - 5th). Harsh or slipping feeling during kickdown events under throttle. Transmission fluid odor (burnt smell).** During a 2 - 3 transmission upshift, the engine is hitting rev limit. Hesitation feel during a pedal tip in, while engine is warming up below 1 C (30 F) ambient temp. This bulletin involves reprogramming the TCM with the latest available software.
NHTSA · bulletin constructeur11035058Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: Harsh or slipping feeling during upshifts (1st - 5th). Harsh or slipping feeling during kickdown events under throttle. Transmission fluid odor (burnt smell). This bulletin involves reprogramming the TCM with the latest available software.
NHTSA · bulletin constructeur11035057Années modèle 2024Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Transmission Control Module (TCM) Updates Customers may comment on one or more of the following: SYMPTOM: Harsh or slipping feeling during upshifts (1st - 5th). Harsh or slipping feeling during kickdown events under throttle. Transmission fluid odor (burnt smell).
NHTSA · bulletin constructeur11035056Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Powertrain Control Module (ECM/PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0148-00 - Fuel Delivery Error. P0850-00 - Park/Neutral Switch Performance. P1191-00 - Inlet Air Temperature Sensor Rational/Performance. P032F - Combustion Engine Producing Insufficient Torque. P208D-00 - Reductant Pump "A" Control Circuit High. P204A-00 - Reductant Pressure Sensor Circuit. P20E9-00 - Reductant Pressure Too High. P208B-00 - Reductant Pump 1 Control Performance. P24B0-00 - Particulate Matter Sensor Circuit Low. P24B1-00 - Particulate Matter Sensor Circuit High. P2281-00 - Air Leak Between MAF And Throttle Body.** P0088-00 - Fuel Rail Pressure Too High - Bank 1. P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. U0109-00 - Lost Communication With Fuel Pump Control Module. P1451-00 - Diesel Particulate Filter System Performance. P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. P2459-00 - Diesel Particulate Filter Regeneration Too Frequent. P0087-00 - Fuel Rail Pressure Too Low. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. P214D-00 - SCR NOX Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. P24DA-00 - Particulate Matter Sensor Exhaust Sample Error Bank 1. P20EE-00 - SCR Nox Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. P226C-00 - Turbocharger Boost Control "A" Slow Response. P229F-00 - NOX Sensor Circuit Range/performance - Bank 1. P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. P203F-00 - Reductant Level Too Low. This bulletin involves inspecting and possibly reprogramming the Engine Control Module (ECM/PCM) with the latest available software.
NHTSA · bulletin constructeur11039515Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Tire Pressure Monitoring System (TPMS) Red XX Displayed and/or Warning Indicator Illuminated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): C1501-31 - Tire Pressure Sensor 1-No Signal. C1502-31 - Tire Pressure Sensor 2-No Signal. C1503-31 - Tire Pressure Sensor 3-No Signal. C1504-31 - Tire Pressure Sensor 4-No Signal. C1505-31 - Tire Pressure Sensor 5-No Signal. C1506-31 - Tire Pressure Sensor 6-No Signal. Customers may also comment on the following: TPMS displaying red "XX" for one or more sensors and/or the tire pressure warning light is on in the Instrument Panel Cluster (IPC). This bulletin involves scanning the TPMS sensors and replacing TPM sensor(s) found in the provided table.
NHTSA · bulletin constructeur11038634Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Tire Pressure Monitoring System (TPMS) Red XX Displayed and/or Warning Indicator Illuminated Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): C1501-31 - Tire Pressure Sensor 1-No Signal. C1502-31 - Tire Pressure Sensor 2-No Signal. C1503-31 - Tire Pressure Sensor 3-No Signal. C1504-31 - Tire Pressure Sensor 4-No Signal. C1505-31 - Tire Pressure Sensor 5-No Signal. C1506-31 - Tire Pressure Sensor 6-No Signal. Customers may also comment on the following: TPMS displaying red "XX" for one or more sensors and/or the tire pressure warning light is on in the Instrument Panel Cluster (IPC). This bulletin involves scanning the TPMS sensors and replacing TPM sensor(s) found in the provided table.
NHTSA · bulletin constructeur11038633Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Electric Power Steering (EPS) Module Updates Customers may experience the following: SYMPTOM: Battery drain due to the EPS system staying active after ignition off. This bulletin involves inspecting and possibly reprogramming the EPS module with the latest available software.
NHTSA · bulletin constructeur11038543Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Electric Power Steering (EPS) Module Updates Customers may experience the following: SYMPTOM: Battery drain due to the EPS system staying active after ignition off. This bulletin involves inspecting and possibly reprogramming the EPS module with the latest available software.
NHTSA · bulletin constructeur11038506Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Wrong Instrument Panel Cluster (IPC) Configuration Customers may comment on one or more the following: Oil pressure gauge and battery life gauges are blank or missing from the IPC Fig. 1. The Trailer Brake radial slider movement will not move past one bar and is inaccurate Fig. 2. NOTE: The Trailer Brake percentage does display correctly. This bulletin supersedes Technical Service Bulletin (TSB) 08-328-26, date of issue September 03, 2026,which should be removed from your files. All revisions are highlighted with **asterisks** and includean updated LOP. This Technical Service Bulletin (TSB) has also been released as a Rapid Service Update (RSU) 26-164, date of issue September 03, 2026. All applicable RSU VINs have been loaded. To verify this RSU service action is applicable to the vehicle, use VIP or perform a VIN search in DealerCONNECT/ServiceLibrary. All repairs are reimbursable within the provisions of warranty.
NHTSA · bulletin constructeur11037279Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Wrong Instrument Panel Cluster (IPC) Configuration Customers may comment on one or more the following: SYMPTOM: Oil pressure gauge and battery life gauges are blank or missing from the IPC Fig. 1. The Trailer Brake radial slider movement will not move past one bar and is inaccurate Fig. 2. NOTE: The Trailer Brake percentage does display correctly. This bulletin involves performing a reconfigure and Proxi alignment on the IPC.
NHTSA · bulletin constructeur11037274Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Brake Fluid Leak At The Brake System Control Module 2 (BSCM2) The customer may comment the following: SYMPTOM: Drops of brake fluid are on the ground. This bulletin involves tightening two BSCM2 brake line fittings.
NHTSA · bulletin constructeur11036267Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Brake System Control Module (BSCM) Updates **Customers may experience one or more of the following: SYMPTOM: Warning message "Selec-Speed Unavailable" appears in the Instrument Panel Cluster (IPC) when trying to enable the Selec-Speed Control (SSC) function. NOTE: There will be no Diagnostic Trouble Codes (DTCs) and no driveability concerns with this symptom.** Anti-Lock Brake System (ABS), Electronic Stability Control (ESC) and 'Decel ACC' lights on in the IPC. Technicians may also find the following: DTC C121A-00 - Steering Angle Sensor Not Initialized - Is stored with no Malfunction Indicator Lamp (MIL). This bulletin involves reprogramming the BSCM with the latest available software.
NHTSA · bulletin constructeur11035978Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set SYMPTOM: one or more of the following Diagnostic Trouble Codes (DTCs): P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-fuel Ratio Imbalance. P032F - Combustion Engine Producing Insufficient Torque. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may experience one or more of the following: **Power Take Off (PTO) may cancel during engagement with high PTO loads.** Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). PTO not auto-resuming after hard-wired remote start (DD/DP Only). Driveline clunk or bump when coasting to a stop in cruise control mode. Engine idle undershoot or delayed response with power steering input. In addition, the following software enhancement(s) is available: Increase the duration that PTO related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only). This bulletin involves reprogramming the PCM with the latest available software.
NHTSA · bulletin constructeur11035974Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set: P1A29-00 - Cell Supervisory Circuit A Failure. U3017-00 - Control Module Timer/Clock Performance. Customers may also comment on one or more of the following: Vehicle in limp-home mode. Start/Stop feature will be disabled. This bulletin involves reprogramming the BPCM with the latest available software.
NHTSA · bulletin constructeur11035182Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Not applicable to vehicles built for US market. Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation SYMPTOM: the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set: **P1A29-00 - Cell Supervisory Circuit A Failure. U3017-00 - Control Module Timer/Clock Performance.** P0E55-00 - DC/DC Converter Current Sensor Circuit "A" Intermittent/erratic. Customers may also experience one or more of the following: **Vehicle in limp-home mode. Start/Stop feature will be disabled.** The 12-volt battery is not charging properly. The battery charge stays low or dies quickly, even after driving. The vehicle had to be towed due to battery not charging.
NHTSA · bulletin constructeur11035167Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0088-00 - Fuel Rail Pressure Too High - Bank 1. P208B-00 - Reductant Pump 1 Control Performance. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P0506-00 - Idle Control System RPM - Lower Than Expected. P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. P040B-00 - EGR Temperature Sensor 1 Circuit Performance. U0109-00 - Lost Communication With Fuel Pump Control Module. P1451-00 - Diesel Particulate Filter System Performance. P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. P1191-00 - Inlet Air Temperature Sensor Rational/Performance. P242F-00 - Diesel Particulate Filter Restriction - Ash Accumulation. P229F-00 - NOX Sensor Circuit Range/Performance - Bank 1. P2281-00 - Air Leak Between MAF And Throttle Body. P0087-00 - Fuel Rail Pressure Too Low. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. P214D-00 - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. P24DA - Particulate Matter Sensor Exhaust Sample Error Bank 1. P20EE-00 - SCR NOx Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. P226C-00 - Turbocharger Boost Control "A" Slow Response. P2281-00 - Air Leak Between Maf And Throttle Body. P229F-00 - Nox Sensor Circuit Range/performance - Bank 1. P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. P203F-00 - Reductant Level Too Low. P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
NHTSA · bulletin constructeur11035053Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0088-00 - Fuel Rail Pressure Too High - Bank 1. P208B-00 - Reductant Pump 1 Control Performance. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P0506-00 - Idle Control System RPM - Lower Than Expected. P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. P040B-00 - EGR Temperature Sensor 1 Circuit Performance. U0109-00 - Lost Communication With Fuel Pump Control Module. P1451-00 - Diesel Particulate Filter System Performance. P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. P1191-00-Inlet Air Temperature Sensor Rational/Performance. P242F-00-Diesel Particulate Filter Restriction - Ash Accumulation. P229F-00 - NOX Sensor Circuit Range/Performance - Bank 1. P2281-00 - Air Leak Between MAF And Throttle Body. P0087-00 - Fuel Rail Pressure Too Low. P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. P214D-00 - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. P24DA - Particulate Matter Sensor Exhaust Sample Error Bank 1. P20EE-00 - SCR NOx Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. P226C-00 - Turbocharger Boost Control "A" Slow Response. P2281-00 - Air Leak Between Maf And Throttle Body. P229F-00 - Nox Sensor Circuit Range/performance - Bank 1. P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. P203F-00 - Reductant Level Too Low. P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
NHTSA · bulletin constructeur11035055Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
R1L/R1H Trailer Brake Setting In Radio Cannot Be Changed Customers may experience the following: SYMPTOM: Trailer brake setting in radio cannot be changed.
NHTSA · bulletin constructeur11035044Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
SA Market Only - Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): **P0088-00 - Fuel Rail Pressure Too High - Bank 1.** P0263-00 - Cylinder 1 Contribution/Balance. P0266-00 - Cylinder 2 Contribution/Balance. P0269-00 - Cylinder 3 Contribution/Balance. P0272-00 - Cylinder 4 Contribution/Balance. P0275-00 - Cylinder 5 Contribution/Balance. P0278-00 - Cylinder 6 Contribution/Balance. Customers may also comment one or more of the following: The engine runs rough and exhibits stumbling and shaking. Loss of power. NOTE: The perceived loss of power is due to an insufficient injector/torque response. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
NHTSA · bulletin constructeur11034904Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Not applicable to vehicles built for US market. SA Market Only - Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): P0088-00 - Fuel Rail Pressure Too High - Bank 1. Customers may also comment on the following: Vehicle enters into limp home mode / exhibits a loss of power This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
NHTSA · bulletin constructeur11034367Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P219A - Bank 1 Air-Fuel Ratio Imbalance Bank 1. P219B - Bank 2 Air-fuel Ratio Imbalance. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may also comment on one or more of the following: **Power Take-Off (PTO) may cancel during engagement with high PTO loads.** PTO not auto-resuming after hard-wired remote start (DD/DP Only). Engine speed surging, unstable, or oscillating while coasting at low vehicle speeds. Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). In addition, the following software enhancement(s) is available: Increase the duration that Power Takeoff related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only) **This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.**
NHTSA · bulletin constructeur11034356Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Oil Pan Leak Customers may experience the following: SYMPTOM: 'Low Oil Level' message on in the Instrument Panel Cluster (IPC). Oil Leak. This bulletin involves replacing the engine oil pan.
NHTSA · bulletin constructeur11034321Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Oil Pan Leak Customers may experience the following: SYMPTOM: 'Low Oil Level' message on in the Instrument Panel Cluster (IPC). Oil Leak. This bulletin involves replacing the engine oil pan.
NHTSA · bulletin constructeur11034320Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
Flash: Brake System Control Module (BSCM) Update Customers may comment on the following: Anti-Lock Brake System (ABS), Electronic Stability Control (ESC), 'Decel ACC' lights on in Instrument Panel Cluster (IPC). Technicians may find the following: Diagnostic Trouble Code (DTC) "C121A-00 - Steering Angle Sensor Not Initialized" is stored with no Malfunction Indicator Lamp (MIL) illuminated This bulletin involves reprogramming the BSCM with the latest available software.
NHTSA · bulletin constructeur11033943Années modèle 2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).