Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)
Se connecterCréer un compte
NANHTSA · États-Unis97V13100019 août 1997

Vehicle speed control

Affiché en anglais d’origine · traduction en attente

The cruise control and throttle cables are attached to the same throttle valve actuating lever at the throttle housing. It is possible that the plastic bushing on either cable could break due to environmental influences coupled with vibration. If the bushing breaks, the outer cable housing can separate from the bushing. In this case, during application of the throttle pedal without cruise control being engaged, the outer tube could catch on the edge of the broken bushing.

Risque: This could cause the throttle valve to remain partially open. It his were to occur, the car might not decelerate as expected increasing the risk of a vehicle crash.

Solution: Dealers will install a spring steel clip on the outer tube of each cable in the area of the adjusting screw and plastic bushing. The clip is designed to prevent the outer tube from dislodging from the bushing.

Concerne: BMW 3 Series (Années modèle 1992–1996) · BMW 3 Series (E46) (Années modèle 1997) · BMW 5 Series (Années modèle 1989–1995) · BMW 7 Series E32 (Années modèle 1993) · BMW 7 Series E38 (Années modèle 1994–1997) · BMW 8 Series (E31) (Années modèle 1994–1997) · BMW M3 (E36) (Années modèle 1995–1997) · BMW Z3 (Années modèle 1996–1997)

Avis officiel ↗

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).