Lettura libera · account gratuito per contribuireErede di Anticars (2000)
AccediCrea un account
NANHTSA · Stati Uniti97V13100019 ago 1997

Vehicle speed control

Mostrato in inglese originale · traduzione in attesa

The cruise control and throttle cables are attached to the same throttle valve actuating lever at the throttle housing. It is possible that the plastic bushing on either cable could break due to environmental influences coupled with vibration. If the bushing breaks, the outer cable housing can separate from the bushing. In this case, during application of the throttle pedal without cruise control being engaged, the outer tube could catch on the edge of the broken bushing.

Rischio: This could cause the throttle valve to remain partially open. It his were to occur, the car might not decelerate as expected increasing the risk of a vehicle crash.

Rimedio: Dealers will install a spring steel clip on the outer tube of each cable in the area of the adjusting screw and plastic bushing. The clip is designed to prevent the outer tube from dislodging from the bushing.

Riguarda: BMW 3 Series (Anni modello 1992–1996) · BMW 3 Series (E46) (Anni modello 1997) · BMW 5 Series (Anni modello 1989–1995) · BMW 7 Series E32 (Anni modello 1993) · BMW 7 Series E38 (Anni modello 1994–1997) · BMW 8 Series (E31) (Anni modello 1994–1997) · BMW M3 (E36) (Anni modello 1995–1997) · BMW Z3 (Anni modello 1996–1997)

Avviso ufficiale ↗

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).