Boletim
Fast burn process introduced to improve fuel economy causes a low frequency metallic noise during the first mile of operation. *tw
🔔 Crie uma conta gratuita para receber alertas por e-mail sobre Ford Explorer (todas as gerações)
Os boletins técnicos (TSB) são instruções de reparação que os fabricantes enviam aos concessionários sobre problemas conhecidos. Não são recalls de segurança, mas muitas vezes confirmam um defeito.
Fast burn process introduced to improve fuel economy causes a low frequency metallic noise during the first mile of operation. *tw
Some 2025 Explorer vehicles equipped with a 2.3L EcoBoost engine may require removal of the turbocharger oil return tube due to various concerns. Workshop Manual, Section 303-04 has been updated with improved turbocharger oil return tube removal and installation service procedure steps.
Some 2025 Explorer/Aviator vehicles built on or before 22-Feb-2025 may exhibit a no crank/no start and/or engine shuts off when placed into gear.
Some 2025 Explorer/Aviator vehicles may exhibit a no crank/no start and/or engine shuts off when placed into gear.
Certain 2023 Model Year Explorer, Bronco, Ranger Vehicles Equipped with 2.3L Gas Engine In all of the affected vehicles, a damaged tool used during the engine block machining process may have allowed the main oil galley to exceed specification, resulting in an insufficient seal of the main oil galley plug. An insufficient seal at the main oil galley plug may result in an oil leak from the engine block.
Certain 2021 Explorer Vehicles Equipped with 2.3L Engines ; Inspect Left Hand Engine Mount in some of the affected vehicles, the left hand (LH) engine mount may leak hydraulic fluid. Once it leaks enough fluid, the mount will no longer perform as intended. This can lead to increased vehicle vibration and noise.
2017 vehicles equipped with a 2.0L GTDI, 2.3L GTDI, or 2.5L PFI engine will either be equipped with a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a crankshaft timing sprocket with laser etched faces and no diamond washers (late build). If equipped, diamond washers should be cleaned, inspected and reused, if undamaged. Diamond washers should never be installed along with a laser etched crankshaft timing sprocket. Related WSM procedure information is in the process of being updated.
Oil leak from oil filter adapter - 4.0l sohc engine built before 4/1/2004. *tt
Engine overheating due to thermostat failure. *tt
Some vehicles equipped with 4.0l sohc engines may exhibit an oil leak from the oil pressure switch boss of the engine block. *tt
Some vehicles may exhibit an engine oil leak from the rear main crankshaft seal. *tt
Concerns with oil leak of the engine block at the oil pressure switch boss. Tt
Some vehicles may experience a stall and/or stumble during a cold engine decel. *yc
Some 4.0l engines with block heaters may experience coolant leaks due to interference with the block. *jd
Long crank - sticking idle air control (iac) valve - vehicles built from 11/1/94 through 3/30/96 -stall - after starting when engine allowed to soak from 1-4 hours - sticking idle air control (iac) valve. *tw
Improper rtv application at the front/rear lower intake manifold end seals & side gaskets may cause an oil/coolant leak. *tt
Engine oil leak at the oil pan, front cover &/or the front & rear crankshaft oil seal. *tt
Information on correcting an oil pan gasket leak. *tt
Vehicles may have an exhaust leak at the y-pipe to exhaust manifold connection. *tw
Some 2025 Explorer vehicles equipped with a 2.3L EcoBoost engine may require various repairs and/or maintenance on the fuel system. This may require removal of the high-pressure fuel injectors, high pressure fuel pump, and/or fuel tank/sender. The applicable Workshop Manual (WSM) Sections 310-00 and 303-04 have been revised to reflect updated replacement service procedure steps for these components. Some component removal steps were eliminated from the service procedures and service labor times adjusted to reflect the latest WSM updates.
Some 2025 Explorer vehicles equipped with a 2.3L EcoBoost and 2025 Bronco Sport/Maverick vehicles equipped with a 2.0L EcoBoost may not be compatible with state emissions testing equipment if that equipment has not been updated to be compatible with the new testing protocols.
Some 2025 Explorer vehicles equipped with a 2.3L EcoBoost engine may require removal of the turbocharger due to various concerns.
Some 2025 Explorer 2.3L vehicles may exhibit a failure to communicate with state emissions testing equipment due to equipment that has not been updated to be compatible with the new testing protocols.
Customer Satisfaction Program 23B42 Certain 2023 Model Year Explorer, Bronco, Ranger Vehicles Equipped with 2.3L Gas Engine - Engine Long Block Replacement
Certain 2023 Model Year Aviator and Explorer Vehicles equipped with 3.0L Engines Turbo Hose Routing Inspection and Repair
Fontes: NHTSA (Estados Unidos, domínio público), Transport Canada (Open Government Licence – Canada), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso e Safety Gate da UE (França, Licence Ouverte 2.0), MLIT (Japão, Licença de Dados Públicos 1.0) e MOLIT (Coreia do Sul, car.go.kr).