Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set: P1A29-00 - Cell Supervisory Circuit A Failure. U3017-00 - Control Module Timer/Clock Performance. Customers may also comment on one or more of the following: Vehicle in limp-home mode. Start/Stop feature will be disabled. This bulletin involves reprogramming the BPCM with the latest available software.
Not applicable to vehicles built for US market. Battery Pack Control Module (BPCM) Software Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation SYMPTOM: the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) has been set: **P1A29-00 - Cell Supervisory Circuit A Failure. U3017-00 - Control Module Timer/Clock Performance.** P0E55-00 - DC/DC Converter Current Sensor Circuit "A" Intermittent/erratic. Customers may also experience one or more of the following: **Vehicle in limp-home mode. Start/Stop feature will be disabled.** The 12-volt battery is not charging properly. The battery charge stays low or dies quickly, even after driving. The vehicle had to be towed due to battery not charging.
Oil Pan Leak Customers may experience the following: SYMPTOM: 'Low Oil Level' message on in the Instrument Panel Cluster (IPC). Oil Leak. This bulletin involves replacing the engine oil pan.
Oil Pan Leak Customers may experience the following: SYMPTOM: 'Low Oil Level' message on in the Instrument Panel Cluster (IPC). Oil Leak. This bulletin involves replacing the engine oil pan.
Park Assist Sensor 3 and 4 Harness Swap This bulletin provides information regarding the wire harness connectors for Park Assist Sensors #3 and #4. The harnesses for these sensors are visually identical and may have been interchanged during vehicleassembly. If diagnosis indicates a concern related to Park Assist Sensors #3 or #4, or associated wiring, visually inspect the harness connections to verify correct installation before proceeding with further repair Fig. 1. If the connectors are found to be swapped, release the harnesses from the retaining clips as necessary, disconnect, and reinstall each connector to the correct sensor location. Ensure harnesses are properly secured after repositioning.
Fuel Leaking From Fuel Heater Harness Connector Customers may comment on the following: SYMPTOM: Fuel is leaking. This bulletin involves inspecting and possibly replacing the fuel heater.
Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.
Disconnected Purge Line Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0300-00 - Multiple Cylinder Misfire. P0171-00 - System Too Lean Bank 1. P0174-00 - Fuel System 2/1 Lean. Customers may also experience one or more of the following: Vehicle running rough. Hissing noise from the engine. Vehicle does not start. This bulletin involves replacing the purge hose and canister purge tube.
Improperly Installed Wastegate Rod Retention Clips Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0248-00 - Turbocharger-Supercharger Wastegate Actuator B Range-performance. P2B94-00 - Wastegate Position Sensor B Exceeded Learning Limit. Customers may also experience the following: Lack of acceleration from the turbo. This bulletin involves inspecting the wastegate rod retention clips and possibly replacing them if needed.
International Maps Missing Customers may comment on the following: The vehicle has North American maps installed instead of the International maps. This bulletin involves inspecting the navigation map region and possibly installing International maps to the radio via USB.
"Fuel Leaking From Fuel Heater Harness Connector Customers may comment on the following: Fuel is leaking. This bulletin involves inspecting and possibly replacing the fuel heater."
"International Maps Missing Customers may comment on the following: The vehicle has North American maps installed instead of the International maps This bulletin involves inspecting the navigation map region and possibly installing International maps to the radio via USB."
"Improperly Installed Wastegate Rod Retention Clips Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0248-00 - Turbocharger-Supercharger Wastegate Actuator B Range-performance. P2B94-00 - Wastegate Position Sensor B Exceeded Learning Limit. Customers may also experience the following: Lack of acceleration from the turbo. This bulletin involves inspecting the wastegate rod retention clips and possibly replacing them if needed."
Vehicle does not respond to lock/unlock button presses from keyfob and Key Not Detected Message is Displayed on the Cluster when attempting to start the vehicle with KIN press, No Start No Crank.
"Right Busbar Cover Modification For Service Battery Clearance The technician or customer may experience: While installing the Mopar service battery as a replacement for the factory battery, there is an interference issue with the right busbar cover on the positive terminal side of the battery. This bulletin involves modifying the right busbar cover on the positive terminal side of the battery. "
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).