Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Ford Explorer

1990– · 6 generationen · 98 dokumentierte Mängel · 5 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.

NHTSA · Herstellerbulletin11028830Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Quality improvements include: -Addresses a potential false coolant head temperature DTC that triggers an engine warning light

NHTSA · Herstellerbulletin11017974Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

"Quality improvements include: -Addresses a potential false coolant head temperature DTC that triggers an engine warning light"

NHTSA · Herstellerbulletin11017849Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2022 Explorer vehicles equipped with a 3.3L full hybrid electric vehicle (FHEV) engine and built on 12-Jul-2022 and through 31-Oct-2022 may exhibit a coolant leak at the high voltage (HV) battery coolant cooler outlet hose. This may be due to the HV battery coolant cooler outlet hose contacting the bottom pulley of the accessory drive belt tensioner. To correct the condition, follow the Service Procedure to replace the damaged hose and install a cable tie.

NHTSA · Herstellerbulletin10239631Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer V · 2010–2019
BulletinMittelElektrikNA

Bulletin

Einige 2018er Explorer/Police Interceptor Utility Fahrzeuge mit Police-, Base 100A- oder XLT 200A-Ausstattungsvarianten (Typ-1-Analogcluster im Benutzerhandbuch), die vom 08. Mai 2018 bis zum 05. August 2018 gebaut wurden, können einen parasitären Batterieverbrauch von etwa 250 Milliampere aufweisen, wobei das Instrumentenpanel (IPC) möglicherweise wach bleibt, ohne Schlüssel. Dies kann zu einem Zustand ohne Kurbelwelle/keinen Start oder Entladung der Batterie führen. Um das Problem zu beheben, programmieren Sie den IPC mit der neuesten Softwarestufe über das Integrated Diagnostic System (IDS) neu. Stellen Sie sicher, dass das Fahrzeug an ein Batterieladegerät angeschlossen ist. Für die Anmeldung verwenden Sie den Kausalteil 10849 und die entsprechenden Arbeitsabläufe in Abschnitt 10 des Service Labor Time Standards (SLTS) Manuals.

NHTSA · Herstellerbulletin10216541Modelljahre 2018Automatisch übersetzt · Original: EnglischDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2017-2021 Ford and Lincoln vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.

NHTSA · Herstellerbulletin10201579Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Ford Motor Company has determined certain 2020 Model Year Ford F-150, F-Super Duty and Explorer vehicles with a Ford factory-installed backup camera fail to conform to Federal Motor Vehicle Safety Standard number 111 - Rear Visibility. Contact your local Ford dealer to schedule a service date to perform the recall. Refer to the included communication from Ford for additional information. Altec is not able to complete this repair. All work must be completed by an authorized Ford dealer.

NHTSA · Herstellerbulletin10194523Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2020 Explorer Base vehicles equipped with blind spot information system (BLIS) and class III trailer tow package 52T may exhibit an illuminated BLIS indicator and/or inability to turn the BLIS system off. This may be due to the software in the instrument panel cluster (IPC). To correct the condition, perform a programmable module installation (PMI) on the IPC using the appropriate Ford diagnostic scan tool. For claiming, use causal part 10849 and applicable labor times from Section 10 in the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10184627Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2017-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app , incomplete user authorization and/or no modem electronic serial number (ESN) displayed. To correct this condition prior to programming, remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for the vehicle. Verify that the electronic serial number (ESN) is now displayed. Start a new IDS/FDRS session. Program the TCU to the latest IDS/FDRS version level. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual(WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10179334Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2020 Explorer/Aviator vehicles may exhibit a rattle type noise originating from the exhaust flexible pipe. This may be due to the natural harmonic frequency of the pipe. To correct the condition, follow the Service Procedure to install a worm gear clamp over the exhaust flexible pipe.

NHTSA · Herstellerbulletin10179152Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2020 Explorer/Aviator vehicles may exhibit a rattle type noise originating from the exhaust flexible pipe. This may be due to the natural harmonic frequency of the pipe. To correct the condition, follow the Service Procedure to install a worm gear clamp over the exhaust flexible pipe.

NHTSA · Herstellerbulletin10177124Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2017-2020 Model year vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.

NHTSA · Herstellerbulletin10176110Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2020 Ford and Lincoln vehicles may exhibit a symptom of no ability to schedule a remote start event using the FordPass or Lincolnway app. If only the scheduling portion of the remote start system is not functioning, please ensure that the latest level of SYNC software has been installed. If the remote start system is not functioning using the key fob and/or the on-demand remote start function from FordPass or Lincolnway application, refer to Workshop Manual (WSM), Section 303-06 for further diagnosis.

NHTSA · Herstellerbulletin10176119Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer VI · 2019–
BulletinMittelElektrikNA

Bulletin

Some 2020 Explorer, Aviator, Ecosport, Mustang, Escape or Corsair may have a symptom of no ability to schedule a remote start event using the Fordpass or Lincolnway app. This may be due to the current level SYNC software installed. To correct this condition, program the SYNC module utilizing section 415 of the workshop manual. If no update is available or the problem persists after programming, verify that the Fordpass or Lincolnway app is activated properly as per the owners guide. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10169913Modelljahre 2020Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer V · 2010–2019
BulletinMittelElektrikNA

Bulletin

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. Make sure the vehicle is connected to a battery charger. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10149757Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer V · 2010–2019
BulletinMittelElektrikNA

Bulletin

Some 2018 Explorer/Police Interceptor Utility vehicles equipped with Police, Base 100A, or XLT 200A package trim levels (Type 1 analog cluster in the Owner's Manual) built on 08-May-2018 and through 05-Aug-2018 may exhibit a parasitic battery drain of approximately 250 milliamps with the instrument panel cluster (IPC) possibly staying awake with the key off. This may result in a no crank/no start/discharged battery condition. To resolve the concern, reprogram the IPC using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

NHTSA · Herstellerbulletin10144946Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer V · 2010–2019
BulletinMittelElektrikNA

Bulletin

Some 2018 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition, remove the TCU fuse for 5 minutes then reinstall. Make sure you are connected to the internet before retesting. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.

NHTSA · Herstellerbulletin10137130Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer V · 2010–2019
BulletinMittelElektrikNA

Bulletin

Some 2016-2017 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.

NHTSA · Herstellerbulletin10119678Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer V · 2010–2019
BulletinMittelElektrikNA

Bulletin

Some 2016-2017 Ford/Lincoln vehicles SYNC 3 may exhibit an intermittent blank screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. During the update process the SYNC status bar shows Updating System Software for approximately 30 minutes. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or blank screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.

NHTSA · Herstellerbulletin10115952Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer IV · 2005–2010
BulletinMittelElektrikNA

Bulletin

Ford: On some 2010 models there may be many symptoms such as an engine rattle, malfunction light, lack of power, no start, and runs rough. *rm updated 8/9/11. *pe

NHTSA · Herstellerbulletin10037082Modelljahre 2010Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer IV · 2005–2010
BulletinMittelElektrikNA

Bulletin

No start with instrument cluster inoperative. *tt

NHTSA · Herstellerbulletin10020078Modelljahre 2006Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer III · 2000–2005
BulletinMittelElektrikNA

Bulletin

Delayed crank with no start, diagnostic trouble codes (dtc) u0300/p0606/p2105/p2107, malfunction indicator module (mil) and wrench light on. *mj

NHTSA · Herstellerbulletin10008125Modelljahre 2004Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer III · 2000–2005
BulletinMittelElektrikNA

Bulletin

An intermittent no start and/or malfunction indicator lamp (mil) on with diagnostic trouble codes (dtc's) p1233, p1234, p1235, p1236, p1237 or p1238. *tt

NHTSA · Herstellerbulletin10007389Modelljahre 2004Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer III · 2000–2005
BulletinMittelElektrikNA

Bulletin

Subject regarding cigar lighter revised installation procedures. *tt

NHTSA · Herstellerbulletin637573Modelljahre 2002Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Explorer III · 2000–2005
BulletinMittelElektrikNA

Bulletin

Some vehicles may exhibit driveability conditions and / or check engine lamp illuminated with a diagnostic trouble p0455 (gross leak detected). *tt

NHTSA · Herstellerbulletin630653Modelljahre 2002Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).