Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda MX-5

1989– · 4 generationen · 36 dokumentierte Mängel · 4 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleGering
Modelljahr
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

Mazda Motor Corporation has decided to take corrective action on certain 2022MY MX-5 built in Japan from September 5th to September 8th, 2022. All vehicles in this campaign must be repaired prior to retail delivery. Concern Outline: On the subject vehicles, an abnormal noise may be heard from the rear differential when the vehicle is operating around 68 mph. The noise is caused by improper differential teeth contacting between the ring gear and drive pinion.

NHTSA · Herstellerbulletin10222434Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

Grinding Noise from clutch pedal when depressing

NHTSA · Herstellerbulletin10213406Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

MultiModel (mit skyactivdrive ausgestattet) Verschlechterung der ATF-Farbe Neues Fahrzeug: Die Farbe des Automatikgetriebeöls (ATF) ist blau. Mit zunehmender Fahrzeugkilometerleistung verändert sich die ATF-Farbe. Die Farbveränderung beeinträchtigt die Fahrzeugleistung nicht.

NHTSA · Herstellerbulletin10213410Modelljahre 2016Automatisch übersetzt · Original: EnglischDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

SSPC0 - CALIFORNIA REGISTERED VEHICLES DIAGNOSTIC TROUBLE CODES (DTC) CONCERN: Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) on certain 2019 CX-3, Mazda3 and MX-5 as well as 2018 Mazda6 vehicles and produced in the production date ranges below. This SSP will apply only to owners currently registered in the state of California. There are 6,715 vehicles in the VIN ranges above that are registered in the state of California. Concern Outline: On certain subject vehicles, if the vehicle sets diagnostic trouble codes (DTC) P2096 / P2097 and/or P0524, in the memory of the powertrain control module (PCM), they cannot be cleared even after the concern that created the DTC has been resolved.

NHTSA · Herstellerbulletin10177975Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

Multi-Model - Clutch Slippage or Smell after Clutch Disc Replacement

NHTSA · Herstellerbulletin10185835Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

There have been warranty claims submitted for noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.

NHTSA · Herstellerbulletin10159204Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

Some vehicles equipped with MAZDA CONNECT may exhibit the following oil maintenance monitor concerns on the center display: The wrench light (Oil Change Due message) cannot be cleared using MAZDA CONNECT/Applications/Vehicle Status Monitor/Maintenance reset menu. The wrench light (Oil Change Due message) is displayed before the oil change is due. Vehicles with multi-information display Vehicles without multi-information display This is caused by only one reset procedure being performed when the oil is changed, usually using the center display. Two reset procedures are required, one is using the trip meter switch to reset the powertrain control module (PCM) and the other is using the center display to reset the connectivity master unit (CMU). To correct this issue, the CMU software has been modified so that the oil maintenance monitor reset operation on the center display resets both the CMU and the PCM at the same time. With this change, there set operation using the trip meter switch is now unnecessary.

NHTSA · Herstellerbulletin10148073Modelljahre 2018–2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (ND) · 2015–
BulletinGeringGetriebeNA

Bulletin

Some vehicles may exhibit a creak noise from around the rear differential when the clutch is engaged quickly or the vehicle accelerates/decelerates rapidly. This is caused by a stick-slip noise occurring at the contact surface between the power plant frame (ppf) (a) and the rear differential. To eliminate this concern, the tightening torque of the stud bolts and nuts has been increased.

NHTSA · Herstellerbulletin10092535Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (NC) · 2005–2015
BulletinGeringGetriebeNA

Bulletin

Squeaking noise from clutch pedal when depressed. *tt

NHTSA · Herstellerbulletin10020016Modelljahre 2006Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
MX-5 (NB) · 1998–2005
BulletinGeringGetriebeNA

Bulletin

Subject on transmission control module( tcm ) protector pad application. *yc

NHTSA · Herstellerbulletin603121Modelljahre 1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).