Bulletin
Activation of MINI Personal Assistant is not possible via the Multifunction Steering Wheel (MFL) buttonand/or via the MINI Interaction Unit (MIU). Intelligent voice control via the wake-up word Hey MINI is possible.
🔔 Créez un compte gratuit pour recevoir les alertes e-mail sur Mini Hatch (toutes les générations)
Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.
Activation of MINI Personal Assistant is not possible via the Multifunction Steering Wheel (MFL) buttonand/or via the MINI Interaction Unit (MIU). Intelligent voice control via the wake-up word Hey MINI is possible.
Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases it may happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automatically deleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
When driving over an uneven road surface, a thumping noise can be heard from the front axle. Seeattached video V 31 02 26. Under certain weather conditions, a groaning noise may be heard during steering movements. CAUSE
An adjusting element installed in the soft-top bow bearing can potentially cause chafing on the convertible top.
Service Action: Left Side EMF (Parking Brake Actuator)
On rare occasions, a check control message may be displayed indicating a malfunction in the rear lightingfunctions, including the brake light, taillight, side light; or turn indicator. Functionality can be restored following a terminal change. In addition, the following fault codes entries may be stored in the RLMAL or RLMAR control unit 80807D - RLM control unit: Internal component error 808004 - SEPIC: SEPIC short circuit/overload current to terminal 31 8081FD - RLM control unit: Internal component error 808184 - SEPIC: SEPIC short circuit/overload current to terminal 31
In some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
The parking brake actuator has not been wound correctly cannot be applied or released. Check Control message Parking brake failed. When parking, secure the vehicle against rolling away. Mustbe checked by the Service Partner. The vehicle is still held by the unaffected side and the transmission lock.
Cavity protection applied to the underside of the hood is leaking out onto the wheel arch trim and grille.
After programming from the I-Levels between 24-03-505 and lower than 24-03-540 to I-Level 24-11-530 or higher, the following CCM may be displayed: CCM-2525: Brake system. Drive at moderate speed
Steering Wheel Module Return
Customers with a genuine MINI Click and Drive System (C&D) accessory installed may complain of steering system check control messages (CCM) and reduced steering functionality. The concern starts after a software update to 4.28.1.x (21-03-500) or greater, and the issue can be duplicated after placing a device on the MINI (C&D) Click and Drive accessory. One or more of the following CCM may be stored: Steering effort increased Driving Stabilization failed Speed control failed Collision warning failed Pedestrian warning failed
Proper battery maintenance is vital when MINI vehicles are in your centers inventory. Allowing a vehicles low-voltage battery to drop below 12.0 volts (12.0 V) permanently reduces the expected battery life and can lead to premature failure. For vehicles equipped with high-voltage (HV) batteries, (Plug-in Hybrid Electric Vehicle (PHEV) and Battery Electric Vehicle (BEV)), improper maintenance or handling may lead to a discharged HV battery, requiring replacement. We provide a flexible battery maintenance system which every MINI dealer can use to meet their particular needs. This bulletin explains the Battery Charging Calendar (see attachment), charging system and battery voltage checking procedure below.
Due to a manufacturing defect, the left charge air line can fail and cause an induction leak. In some casesthe Engine Malfunction warning may illuminate.
The left charge air line can fail and cause an induction leak. In some cases the Engine Malfunctionwarning may illuminate. Note: This Service Information is similar to M11 03 23; though this one pertains to vehicles already retailed.
It is possible that the guide stem (aka rotational axis) on the wind deflector can break, upon removal and or during installation.
N12 Tank leak diagnostic module (DMTL) pump:limited warranty extension to 10 years/120,000 miles
B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil
Installation of Right-Hand Drive Stering Spindle in Left-Hand Drive Vehicle is No Longerr Required
The customer states that there is a grating or scraping noise when the steering wheel is turned. The noise comes from the area of the steering column switch center.
The following complaints may be noticed while slow maneuvering with a steering input of 80-100% (at or near full lock, e.g., parking lot maneuvers) or accelerating with a medium to large steering angle: Humming or creaking noises from the rear area; slight vibrations, also noticeable from the driver's seat; the vehicle may also jerk slightly.
Vehicles with total mileage below approx. 12,500 may experience premature wear of the left rear brakes. In some cases, there also may be visible damage due to thermal overload.
During the vehicle's operational life, normal engine oil seepage or sweating, in addition to accumulated road dust, dirt and grime in the engine compartment can give an appearance that there is an active engine oil leak. This is further exaggerated by residual oil that remains on the engine assembly after maintenance services are performed, for example, oil filter changes, engine oil top-offs, etc. If this visual appearance of accumulated oil on the engine assembly is misinterpreted as an active engine oil leak, then unnecessary gasket repairs/replacements will result.
ROLLER SUNBLIND RETURN: MINI AG has requested the inspection and return of the following part number - 54 10 9 451 245. Stock should not be sold or installed on any vehicle.
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0).