Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Audi 80

1978–1995 · 3 generationen · 7 dokumentierte Mängel · 4 Märkte
Generationen
Modelljahr
80 B3 (89) · 1986–1992
RückrufKritischMotorNA

Fuel system, gasoline:Fuel injection system

Vehicle description: Passenger vehicles equipped with v6 engines. An internal seal of the fuel injector can malfunction, allowing fuel leakage in the engine compartment.

NHTSA · USA23. Dez. 199898V332000Modelljahre 1993Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufKritischFahrwerkUK

Possible failure of front suspension bolts

The bolts securing the front suspension struts to the wheel bearing housings may fracture due to brittleness. This could lead to loss of steering control.

DVSA · Vereinigtes Königreich14. Feb. 1992R/1992/009Modelljahre 1991Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B3 (89) · 1986–1992
RückrufKritischFahrwerkNA

Lenkung:Lenkradschloss:Diebstahlsicherung

Unsachgemäß hergestellte Lenkradschloss-Schrauben könnten brechen, wenn der Fahrer eine übermäßige Kraft auf ein verriegeltes Lenkrad ausübt, um die Lenkradsperre zu lösen.

NHTSA · USA10. Apr. 199090V070000Modelljahre 1990Automatisch übersetzt · Original: EnglischDetails ansehen →
80 B2 (81) · 1978–1986
80 B2 (81) · 1978–1986
RückrufKritischKarosserieNA

Rückruf

In the rear trunk area, the right rear side member for the mounting buffer may not have been welded according to specifications. In the event of an accident resulting in rear end damage it is possible that the right rear side member could break loose, damaging the fuel tank and causing fuel leakage.

Transport Canada27. März 19811981039Modelljahre 1980–1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufKritischBremsenNA

Rückruf

The interior surface of the threaded hole for the front brake caliper brake hoses may contain porous spots which would allow brake fluid to seep out of the calipers during heavy brake applications. Prolonged seepage will eventually reeduce brake fluid level in the reservoir and may lead to complete brake failure.

Transport Canada12. Nov. 19801980148Modelljahre 1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelMotorJP

その他(エンジン)

原動機の燃料噴射量等を制御するコンピュータのプログラムが不適切なため、エアコンデ ィショナーを使用している状態等で減速した後、回転数が不安定となり、回転数が上昇し たり又は原動機が停止するおそれがある。

jp9. Feb. 19991207171Modelljahre 1994–1996Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelInnenraumUK

Ungeplante Auslösung des Fahrerairbags

In Wetterbedingungen, die die Entstehung statischer Elektrizität begünstigen, kann sich der Airbag spontan auslösen, wenn der Fahrer das Fahrzeug mit einer hohen statischen Ladung betritt oder verlässt. Dies kann nur geschehen, wenn das Auto steht, und nicht während der Fahrt.

DVSA · Vereinigtes Königreich26. Nov. 1997R/1997/075Modelljahre 1995–1996Automatisch übersetzt · Original: EnglischDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelFahrwerkJP

エアーバッグ

かじ取り装置のステアリング・ホイール(ハンドル)内に組み込まれているエアバッグ装 置のアースが不適切なものがあり、運転者が乗降する際、身体に帯電した静電気が放電し 、最悪の場合、当該エアバッグが自動的に作動するおそれがある。

jp13. Nov. 19971206570Modelljahre 1994–1996Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B3 (89) · 1986–199280 B4 (8C) · 1991–1995
RückrufMittelInnenraumNA

Airbags:Frontal:Sensor/Steuergerät-inaktiv

Fahrzeugbeschreibung: Personenkraftwagen. Einige Airbag-Sensoren erfüllen die Dauerhaltbarkeitsanforderungen von Audi über die gesamte Lebensdauer des Fahrzeugs nicht.

NHTSA · USA6. Okt. 199797V172000Modelljahre 1989–1993Automatisch übersetzt · Original: EnglischDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelFahrwerkUK

Radbolzen sind möglicherweise zu kurz

In einigen Fällen können die Radbolzen für Leichtmetallfelgen zu kurz sein und nicht ausreichend tief in das Gewinde der Radnabe eingreifen.

DVSA · Vereinigtes Königreich7. Feb. 1994R/1993/078Automatisch übersetzt · Original: EnglischDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelBremsenJP

圧力制御伝達部

ブレーキ倍力装置のバキュームポンプ(真空倍力補正装置)内にある樹脂製の羽根(羽 根を回転することにより負圧を発生させる。)が材質不良のため、当該羽根とバキューム ポンプ本体の内部側面が徐々に摩耗して、気密性が損なわれ、このままの状態で使用する と倍力装置に適正な負圧が得られなくなり、制動停止距離がのびるおそれがある。

jp13. Mai 19931204870Modelljahre 1991–1992Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelFahrwerkJP

パワーステアリング

動力式かじ取り装置(パワーステアリング)のロータリーバルブ(油圧経路を切り換え る弁)に組み付けられている油圧を保持するための樹脂製リングに材質不良のものがあり 、冷間時に当該リングが収縮し、オイルが漏れて、このままの状態で使用するとハンドル が重くなるおそれがある。

jp13. Mai 19931204860Modelljahre 1992Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B4 (8C) · 1991–1995
RückrufMittelFahrwerkUK

Possible leakage of power steering fluid

Power steering fluid may leak from the top seal of the steering assembly pinion housing into the vehicle passenger compartment.

DVSA · Vereinigtes Königreich27. Apr. 1993R/1993/013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–198680 B3 (89) · 1986–1992
RückrufMittelGetriebeNA

Powertrain

On vehicles with automatic transmission, a low oil level in the differential could cause premature bearing and gear wear and eventual failure of the differential. This could result in possible drive wheel lock-up and loss of vehicle control. Correction: Differential will be drained and oil will be replaced with an advanced design high performance gear oil. Owners will be provided with a revised maintenance schedule.

Transport Canada22. Jan. 19931993008Modelljahre 1985–1991Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–198680 B3 (89) · 1986–199280 B4 (8C) · 1991–1995
RückrufMittelGetriebeNA

Power train:Axle assembly

The differential oil of the transaxle is lost over time due to evaporation. Low oil levels cause premature bearing and gear wear and eventual failure of the differential.

NHTSA · USA11. Jan. 199393V006000Modelljahre 1985–1991Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelMotorNA

Engine

On vehicles with automatic transmission, the idle stabilizer valve may experience excessive wear. Such wear causes idle fluctuations which are barely noticeable at first, but ultimately could result in unsatisfactory driveability. Correction: Idle stabilizer valve will be replaced. V.I.N. Range wau***8**fa000001 to wau***8**ga138778

Transport Canada26. Mai 19871987054Modelljahre 1985–1986Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelSonstigesNA

Vehicle speed control

Excessive wear of idle stabilizer could cause idle fluctuations.

NHTSA · USA18. Mai 198787V069000Modelljahre 1985–1986Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelInnenraumNA

Seats And Restraints

The seat belt buckles manufactured by afg and located on the rear seat of the audi 4000 and the right front seat of the audi 5000 may not lock securely, although the metal tongue of the seat belt has been fully engaged. In the event of an abrupt brake application or on impact, these buckles could become unlocked. Correction: Vehicles will be inspected and all seat belt buckles manufactured by afg will be replaced. V.I.N. Range audi 4000 - wau***8*ga*124887 to wau***8*ga*137554 audi 5000 - wau**44*g**087473 to wau**44*g**099448

Transport Canada4. Sept. 19861986098Modelljahre 1986Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelInnenraumNA

Seat belts:Front:Buckle assembly

Rear or front right seat belt locks may not properly engage. Consequence of defect: Seat belts could separate in event of heavy brake application or impact and thus subject passengers to injury.

NHTSA · USA18. Aug. 198686V113000Modelljahre 1986Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelMotorNA

Fuel system, gasoline:Fuel injection system

The fuel pump may stop functioning without warning. This can occur because an electrical connector in the fuse panel may overheat and interrupt the electrical circuit.

NHTSA · USA9. Nov. 198383V117000Modelljahre 1980–1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelKarosserieNA

Structure:Frame and members

Rear bumper system on certain vehicles may not have been properly welded during assembly. In the event of a rear end collision, the right side bumper supportor could break loose, damage the fuel tank and allow fuel to leak.

NHTSA · USA24. März 198181V039000Modelljahre 1980–1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
80 B2 (81) · 1978–1986
RückrufMittelBremsenNA

Service brakes, hydraulic:Foundation components:Disc:Caliper

On certain vehicles, porous spots may have developed on the interior surface of the threaded hole for the brake hose during the moulding process. These spots allow brake fluid to seep from the calipers during heavy brake applications.

NHTSA · USA12. Nov. 198080V146000Modelljahre 1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).