Problem: Bei bestimmten Fahrzeugen könnte eine Schraube in der Inverter-Baugruppe für das Hybridsystem nicht ordnungsgemäß angezogen worden sein. Dadurch könnte das Fahrzeug in einen Modus mit reduzierter Leistung wechseln oder die Kraftübertragung auf die Räder verlieren. Wenn sich die Schraube in der Inverter-Baugruppe lockert und die Zündung eingeschaltet ist, könnte zudem ein Kurzschluss entstehen.
Sicherheitsrisiko: Ein Verlust der Kraftübertragung auf die Räder könnte das Unfallrisiko erhöhen. Ein Kurzschluss kann die Gefahr eines Brandes begründen.
Korrekturmaßnahmen: Toyota wird die Halter per Post benachrichtigen und Ihnen empfehlen, Ihr Fahrzeug zu einem Händler zu bringen, um die Schraube der Hybrid-Inverter-Baugruppe überprüfen zu lassen. Der Händler wird die Schraube nachziehen oder bei Bedarf die Inverter-Baugruppe austauschen.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025-2026 Camry Hybrid and 2026 Corolla Cross Hybrid vehicles. A bolt inside the inverter may not have been tightened properly, causing incomplete contact at the inverter terminal.
Het beeldscherm van het digitale dashboard is mogelijk verkeerd geprogrammeerd waardoor er onnodig vaak gegevens worden weggeschreven naar een geheugen in het systeem.
rdw14. Aug. 2025MGP250257Modelljahre 2023–2024Im Original (Niederländisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Note: This recall replaces Transport Canada recall no. 2023-386. Vehicles that were repaired under that recall don't require this repair. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Transport Canada6. Mai 20252025242Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, the inspection completed by a Toyota dealer during recall SRC RF2 (Transport Canada recall no. 2023-386) may not have been done correctly. As a result, a second inspection is required. On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Transport Canada29. Jan. 20252025037Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, the upper universal joint on the intermediate steering shaft may not have been manufactured properly and could break. As a result, the steering shaft could separate from the universal joint and cause a loss of steering. Safety Risk: A loss of steering could create the risk of a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to replace the intermediate steering shaft.
Transport Canada21. Nov. 20242024710Modelljahre 2023–2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Corolla and Corolla Hybrid vehicles. Due to cracks developed during the manufacturing process, the steering intermediate shaft assembly may fracture and possibly result in the shaft detaching from the steering column.
Ungenügendes Pressen der Teile der Hochdruck-Kraftstoffpumpe kann dazu führen, dass sich der Zylinder in der Kraftstoffpumpe bewegt, durch die sich der Kolben bewegt. Dadurch kann es zu Verschleiß zwischen Zylinder und Pumpengehäuse kommen, was zu einem erhöhten Druck auf die Ventile und/oder den Sitz des Bewegungsventils im Inneren des Pumpengehäuses führt. Diese erhöhte Belastung kann einen Riss in der Schweißnaht der betroffenen Ventile verursachen, was zu einem Kraftstoffaustritt führen könnte und das Brandrisiko erhöht.
Problem: Bei bestimmten Fahrzeugen wurde ein Sensor für das Insassenklassifizierungssystem (OCS) möglicherweise nicht ordnungsgemäß hergestellt. Dadurch könnte der Sensor einen Kurzschluss verursachen, und das Airbagsystem deaktiviert den Beifahrerairbag vorne, auch wenn ein Beifahrer sitzt.
Hinweis: Dieses Problem würde dazu führen, dass eine Warnmeldung im Kombiinstrument angezeigt wird und die Airbag-Kontrollleuchte die Meldung „Beifahrerairbag aus“ anzeigt.
Sicherheitsrisiko: Ein deaktivierter Airbag könnte das Verletzungsrisiko für einen Beifahrer bei einem Unfall erhöhen.
Korrekturmaßnahmen: Toyota wird die Halter per Post benachrichtigen und Ihnen empfehlen, das Fahrzeug zu einem Händler zu bringen, um den OCS-Sensor zu prüfen und bei Bedarf zu ersetzen.
Issue: On certain vehicles, the inspection completed by a Toyota dealer during recall SRC RF0 (Transport Canada recall 2023-311) may not address the safety risk. As a result, a second inspection is required. On certain vehicles, a problem with the instrument panel could cause the passenger-front airbag not to open and inflate properly in a crash. Safety Risk: An airbag that doesn't inflate properly could create an increased risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the instrument panel. To reduce the safety risk, Toyota recommends not to transport a person in the front-passenger seat until the recall repairs have been completed.
Transport Canada20. Dez. 20232023681Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Corolla Cross vehicles that were previously inspected at a dealership under recall 23V-384. The instrument panel may have been produced without the required perforation, which could result in the front-passenger air bag not deploying properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.
Affected vehicles are fitted with a high-pressure fuel pump which over time could develop a crack which could lead to a fuel leak and a risk of a vehicle fire.�
De Data Communicatie Module (DCM) wordt mogelijk niet geheel afgesloten na uitzetten van het contact. Hierdoor start de DCM niet op als het contact weer wordt aangezet waardoor de E-call functie niet geactiveerd wordt.
This recall was replaced by Transport Canada recall no. 2025-242. Issue: On certain vehicles, the steering wheel spiral cable assembly could disconnect. If this happens, the airbag (SRS) warning lamp would turn on, and the driver-front airbag wouldn't work in a crash. This may also cause the horn or other steering wheel-mounted controls not to work properly. Safety Risk: An airbag that doesn't work properly could increase the risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect the production date of the spiral cable assembly, and replace it if necessary.
Transport Canada12. Juli 20232023386Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Issue: On certain vehicles, a problem with the instrument panel could cause the passenger-front airbag not to open and inflate properly in a crash. Safety Risk: An airbag that doesn't inflate properly could create an increased risk of injury in a crash. Corrective Actions: Toyota will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the instrument panel. To reduce the safety risk, Toyota recommends not to transport a person in the front-passenger seat until the recall repairs have been completed.
Transport Canada30. Mai 20232023311Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Corolla Cross vehicles. The instrument panel may have been produced without the required perforation, which could result in the front-passenger air bag not deploying properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safey Standard number 208, "Occupant Crash Protection."
NHTSA · USA30. Mai 202323V384000Modelljahre 2022–2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Problem: Dieser Rückruf betrifft bestimmte Blockheizsätze, die bei bestimmten Fahrzeugen installiert oder als Zubehör bei Toyota- oder Lexus-Händlern verkauft werden. Bei bestimmten Fahrzeugen hat das Motorblockheizkabel möglicherweise nicht ausreichend Hitzeschutz und kann durch hohe Temperaturen beschädigt werden. Wenn dies passiert, könnte das Kabel während des Einsteckens kurzschließen und dazu führen, dass die Kabel überhitzt oder schmelzen. Hinweis: Dieser Rückruf betrifft nur die folgenden Teilenummern des Blockheizer/-kabels: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A489J14 PK5A408J05 PU14000903 Sicherheitsrisiko: Überhitzung oder Schmelzen der Motorblockheizungsleitungen können ein Brandrisiko darstellen. Korrekturmaßnahmen: Toyota empfiehlt, die Motorblockheizung sofort nicht mehr zu verwenden. Toyota wird die Besitzer per Post benachrichtigen und Sie anweisen, Ihr Fahrzeug zu einem Händler zu bringen, um den Motorblockheizer zu deaktivieren. Für einige Fahrzeuge sind die Korrekturmaßnahmen für diesen Rückruf noch in Entwicklung. Bei anderen kann kein neuer Motorblockheizer installiert werden, und der Besitzer erhält eine Rückerstattung des Kaufpreises für den Motorblockheizer.
The resistance characteristics of the fuel pump components against high fuel pressure may be inadequate.As a result, cracks may be formed on the welded parts of the pump and a fuel leak may occur, posing a risk to the following traffic.
Safety Gate · EU23. Juni 2021A12/00946/21Modelljahre 2019–2021Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).